Is this information written in some log file so that I can make a script to trace them? Thx
The last several updates when downloaded are .dll files. What or how am I supposed to install these?
Hello dears OM. I need your expertise. I've been having a problem with JTDX and WSJTX for the past few days. I'm using an ICOM 7300 radio and its sound card, 9600 baud. Windows 10, 32-bit. When transmitting, after a few seconds to two minutes, the software switches back to receive mode on its own. In JTDX, the red TX power button changes to a lighter color, indicating receive. When receiving, the time bar ALWAYS reaches 14 seconds out of 15 seconds, or at the end in FT8 mode, or 6 seconds or at the...
Hello dears OM. I need your expertise. I've been having a problem with JTDX and WSJTX for the past few days. I'm using an ICOM 7300 radio and its sound card, 9600 baud. Windows 10, 32-bit. When transmitting, after a few seconds to two minutes, the software switches back to receive mode on its own. In JTDX, the red TX power button changes to a lighter color, indicating receive. When receiving, the time bar ALWAYS reaches 14 seconds out of 15 seconds, or at the end in FT8 mode, or 6 seconds or at the...
I tried to install JTDX improved previously with the same issue as I am getting now. My radio is a Yaesu FT-710. In JTDX, I use the Yaesu FT-991 and it works well. However, in JTDX improved I always get a rig error. Have tried multiple settings under the Radio tab but nothing has changed the error. "Hamlib error: Invalid parameter while getting current VFO mode". Does JDTX and the JDTX improved use different versions of Hamlib? If so, how to I get JTDX improved to use the same version as JTDX which...
I tried to install JTDX improved previously with the same issue as I am getting now. My radio is a Yaesu FT-710. In JTDX, I use the Yaesu FT-991 and it works well. However, in JTDX improved I always get a rig error. Have tried multiple settings under the Radio tab but nothing has changed the error. "Hamlib error: Invalid parameter while getting current VFO mode". Does JDTX and the JDTX improved use different versions of Hamlib? If so, how to I get JTDX improved to use the same version as JTDX which...
I tried to install JTDX improved previously with the same issue as I am getting now. My radio is a Yaesu FT-710. In JTDX, I use the Yaesu FT-991 and it works well. However, in JTDX improved I always get a rig error. Have tried multiple settings under the Radio tab but nothing has changed the error. "Hamlib error: Invalid parameter while getting current VFO mode". Does JDTX and the JDTX improved use different versions of Hamlib? If so, how to I get JTDX improved to use the same version as JTDX which...
Hi, How to display the country? Now show EU instead of France for example thank’s
Late reply but I figured out that if you don't have blank line between decoding periods checked there is no audio alerting. Try that.
In addition to moving the sound files, I had to rebuild to be able to debug everything but the problem is the audio alerts are tied to the "blank line between decoding periods" -- if you have that off, no audio alerts. If you turn it on, works fine.
Thanks for the great work. The .deb file installs sounds at /home/uwe/sounds (my user name is NOT uwe -- it created this directory). After moving that directory to my ~, sounds still not working -- investigating that -- but the installer should probably put them at /usr/share/JTDX/sounds anyway.
Hello i installed the tool and set it up. but no SUPERFOX (3D2V ) reception is possible. wjst-x improved is running fine here. any further tips for me ? tnx 73´s Alexander, DL5VZ
Not sure which forum to post this on, but I have to start somewhere. I am really looking for someone running the sunsdr2 DX trx, alongside Logger32, TCI, RadioSync and JTDX. I open JTDX from the Bandmap within Logger32 by pressing “start”. I need “Radiosync” to bridge the gap between my radio and Logger32 as Logger does not support TCI (Transceiver Computer Interface). Radiosync creates a pseudo COM port for Logger. Normally although a little convoluted, the system works perfectly and I have made...
The "JTDX Improved" is working great but I did notice that sometimes there is an asterisk to the right of the country in the receive window.I could not determine a correlation between new countries or grids. The notification colors are working fine. I did not find an explanation in the user guide or in any previous discussion thread. Does anyone know? Thanks
I ran into this issue as well, and found the necessary deb package here: https://sourceforge.net/projects/jtdx/files/jtdx_2.2.159/Linux/Hamlib/ This is included in the original jtdx distribution but not here for some reason. You can install it with dpkg and then jtdx-improved will install cleanly.
same error in my linux-mint v23.1 ....in the meanwhile, where did anyone find a linux d/l that i can d/l and it would work?? tnx
The problem still persists. Do i really have to forget jtdx_improved totally because of this hamlib problem?
Thank you so very much for this app. It's allowed me to get even closer to full functionality using Expert Electronics ESDR3 working on my Mac, thanks to your wise choice to include TCI support. Using TCI, CAT works fine including VFO controld, even in split mode. Audio in and out also work fine via TCI. However, when I go to transmit in JTDX, I lose the connection to ESDR3. I am using version 1.0.7 beta of ESDR3, which uses TCI version 2.0. I suspect that your JTDX is not. What's the chance of getting...
Thank you so very much for this app. It's allowed me to get even closer to full functionality using Expert Electronics ESDR3 working on my Mac, thanks to your wise choice to include TCI support. Using TCI, CAT works fine including VFO controld, even in split mode. Audio in and out also work fine via TCI. However, when I go to transmit in JTDX, I lose the connection to ESDR3. I am using version 1.0.7 beta of ESDR3, which uses TCI version 2.0. I suspect that your JTDX is not. What's the chance of getting...
Thank you SO much for this app. I've been banging my head against the wall for countless hours trying to get WSJT-X to work with my Expert Electronics SunSDR2DX, running ESDR3 beta. Since you had the wisdom to support EE's excellent TCI protocol, JTDX install and configuration has been painless. It's working flawlessly on my M2 Studio Mac, running Sonoma 14.4 and ESDR3 1.0.7 beta. Perhaps we'll see a native Apple Silicon build in the future?
I have the same problem. To newly installed clean ubuntu i installed the git version of hamlib as the error message stated, but it didn't help. I also tried to install jtdx by force with dpkg -f. That installed the program and it worked, but then apt started to give error messages when i tried to install other applications. Apt suggested repairing of broken packages, and it did it by installing basic versions of wsjtx and jtdx (not "improved" versions). I don't know anything about linux , but it...
I was able to install the original jtdx into the latest version of linux mint without any problems. But when I downloaded and tried to install the jtdx_improved version I get a dependency error message saying jtdx_improved requires hamlib >=4.5. I've downloaded and installed hamlib 4.5.5 and rebooted but I still get the same error message. I'm somewhat new to linux so what am I not doing, or doing wrong?
Hi, first up thanks for this mod version which is pretty much all I use here at C21TS. I just like the simplicity of the band buttons for being able to click around the and quickly without having to deal with menus. I use the mode button hardly at all. However, one artifact of using the band buttons is I have to wait for a FT8 cycle to finish before I change bands. Why, because if I change say from 20m to 6m half way through a cycle all the 20m spots will get reported for 6m. Generally speaking,...
Thank you for making the application work so well. I enjoy using it daily. I would like to offer a suggestion to the band buttons / working frequencies. I use the band buttons when working stations one at a time on the same band. When chasing Expeditions I use the drop down down list of working frequencies where I have added their working frequencies. That list of working frequencies gets longer each time there is a new Dxpedition. Upon starting JTDX v2.2.159 Improved and selecting the 15m band button,...
Greetings the hound button forces the tx to 15/45 but this is not entirely correct. lThe right station could transmit in 15/45 slot with mshv and on standard frequencies without needing to receive rr73 after Rrapport Thank you Carlo
Greetings the hound button forces the tx to 15/45 but this is not entirely correct. lThe right station could transmit in slot 15/45 with mshv and therefore not need to receive rr73 Thank you Carlo
I noticed that turning the monitor on and off the letter S disappears... 73 Carlo
I have just installed JTDX this morning. On running the program loads, waits for 2 - 3 seconds then closes. I have installed as Admin and User and run as both as well. Not too technically minded so at am a loss. Anyone got any ideas ?
Thanks do very much for the addition of the 'dark mode' to jtdx-improved!!! Jerry - LU/K4OAM Patagonia, ARGENTINA
All of the stock macros populate and work except TU ^ 73.....the name does not populate so all that is sent is TU 73.....Looking att eh log input screen the NAME box is blank and the log file does not show a NAME but if I fill in the input box with a name it logs ok but the macro still does notwork... anyone have this functikon working and can share some help . Tnx, Bruce AH0U
Greetings I can't activate play alert sound I have 2 audio cards but I don't hear any alerts in the audio folder ...bin\sounds there are .wav files What tests can I do? Thank you Carlo
I am trying to use the nodered wsjtx module to pass information to hamclock. It works with wsjtx and everything shows that the JTDX messaging is setup identical however I receive this message: 13 Jun 08:28:11 - [error] [wsjt-x-decode:Decode WSJT-X] RangeError: Offset is outside the bounds of the DataView 13 Jun 08:28:13 - [error] [wsjt-x-decode:Decode WSJT-X] RangeError: Offset is outside the bounds of the DataView 13 Jun 08:28:26 - [error] [wsjt-x-decode:Decode WSJT-X] RangeError: Offset is outside...
Using an standard IC-7300 via USB via HRD (I have other reasons for this and not direct CAT to rig) the TX audio level is not retained. i see that in the ini file the value of pwrBandTxMemory=@Variant(\0\0\0\x1c\0\0\0\0) does indeed change value if i move the slider and close the app, it updates the ini file with changed value (can't understand the values), but seems to ignore it if the radio selected is HRD, if its none or any other radio it works fine, i don't know why HRD could have anything to...
tried this out and can indeed replicate the issue, if I go through HRD, HRD can ON/OFF the radio fine, HRD has the direct serial control in this case
Hi, it seems very quiet here, hopefully there is some activity. I have JTDX running successfully, with one exception. The IC7300 does not power up on programme start (both the Rig Power buttons are ticked in settings). When I close the programme down the rig goes off as expected. With the IC7300 powered on, when I select Test CAT, which is green, in the Radio section, the rig powered down and needs to be physically powered on. The Test CAT button turns grey after pushing it I have tried using Win4IcomSuite...
Hi, it seems very quiet here, hopefully there is some activity. I have JTDX running successfully, with one exception. The IC7300 does not power up on programme start (both the Rig Power buttons are ticked in settings). When I close the programme down the rig goes off as expected. I have tried using Win4IcomSuite and it is able to power up th rig when it starts. Any ideas on what could be causing the problem? 73, Barry