You should read https://github.com/etingof/pysnmp/issues/429 for details on which version of PySNMP you should use and why. The technical support also moved away from here for long.
Hi, Running the code in a REPL is False even though my Python version is 3.10.12. Is this a bug? $ python3 Python 3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.0] on linux Type "help", "copyright", "credits" or "license" for more information. import platform IS_PYTHON_344_PLUS = platform.python_version_tuple() >= ('3', '4', '4') IS_PYTHON_344_PLUS False Thank you Johan
Please, open a GitHub issue whenever you have any question concerning pysnmp. Thank you!
I believe you need to call .setLocalAddress on the pysnmp transport object to make pysnmp binding to specific interface when sending out packets. BTW, it is more reliable to open a GitHub issue.
Hi, We have a distributed application running as containers. I need some help to set the source address for the acknowledment packet going out of pysnmp. So, this is our workflow: Agent sends the informs to the application (running on server 1) Application forwards the udp packet to the informs processing app (running on server 2) --> Its for load balancing. Informs processing app on server 2, receives and process the informs, sends the acknowledgement back to the Agent. This is done by the snmp...
Hi, We have a distributed application running as containers. I need some help to set the source address for the acknowledment packet going out of pysnmp. So, this is our workflow: Agent sends the informs to the application (running on server 1) Application forwards the udp packet to the informs processing app (running on server 2) --> Its for load balancing. Informs processing app on server 2, receives and process the informs, sends the acknowledgement back to the Agent. This is done by the snmp...
I wonder if you could open up an issue at GitHub because SF is very dead, unfortunately: https://github.com/etingof/pysnmp/issues/new On 04/24/2018 06:25 PM, Joshua Brown wrote: I am having the same issue. So I thought I would comment to show interest in an answer. Pysnmp Inform Support https://sourceforge.net/p/pysnmp/discussion/46667/thread/028e97aa/?limit=25#ad87 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/pysnmp/discussion/46667/ To unsubscribe from further...
I am having the same issue. So I thought I would comment to show interest in an answer. I am not trying to take the question away from Jlgar, but with my specific scenario I can confirm that my reciever can recieve SNMPv3 traps, just not informs. So it seems like an acknowledment issue on the pysnmp side.
I am having the same issue. So I thought I would comment to show interest in an answer.
I apologize for the generality of this message. I am a new user to Pysnmp. I am using it to read (and later update) MIB values, but nearly all of my commands are ending with the above message. Based on older posts I read, I set the following in my code: debug.setLogger(debug.Debug('all')) sys.stderr = open('dataerr.log', 'a') I get output, but it is terribly unreadable, so I wondered if someone could help decipher it for me. The output file is on my Google Drive, viewable using this link: [https://drive.google.com/file/d/1jCwVORLVyvG8Pm769sIdwAZjEPRJ6kfS/view?usp=sharing]...
I found that queue contain only 267 trap. How to increase this size ?
Hey , I have a trap reciever which uses pysnmp module to recieve trap. But the amount of trap which i would receive concurrently is very high . As i was tesing the pysnmp module i found out not more than 200 trap can be recived concurrently . Any workaround to make this work for say 10K concurrent trap. I do have a alerternaive solution , but i need to check if pysnmp support this?. I am using snmpEng = engine.SnmpEngine() Default constructure.
Hey , I want my application have a control over acknowledgment of trap . My sender are using inform . But i need my reciever to acknowledgment . Can someOne help iwith small snapshot of code how it can be done using pysnmp
Excellent will do. Thank you!
It would be infinitely better if you'd raise an issue at GitHub [1]. SourceForge seems to be dying, unfortunately. Thanks! https://github.com/etingof/pysnmp/issues/new On 11/14/2017 04:36 PM, Karthika Krishnan wrote: Thank you Ilya. I had one other question for you regarding the the OID values. Should I be raising another discussion or can i use the same forum to do so ? snmp_v3 snmptrap working but pysnmp code doesn't https://sourceforge.net/p/pysnmp/discussion/46667/thread/b300e890/?limit=25#0b45...
Thank you Ilya. I had one other question for you regarding the the OID values. Should I be raising another discussion or can i use the same forum to do so ?
I did not use any trap receiver, just observed the packets on the wire and in debug log. On 10 Nov 2017, at 04:00, Karthika Krishnan ani0989@users.sf.net wrote: I am going to try tcpdump and update soon, but can you tell me what trap receiver you used ? snmp_v3 snmptrap working but pysnmp code doesn't https://sourceforge.net/p/pysnmp/discussion/46667/thread/b300e890/?limit=25#7da8 Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/pysnmp/discussion/46667/ https://sourceforge.net/p/pysnmp/discussion/46667/...
I am going to try tcpdump and update soon, but can you tell me what trap receiver you used ?
You code looks good to me [1] and it seems to work [2]. Can you see the trap message on the wire (with tcpdump)? Is it anyhow different from the message that snmptrap produces? 1: from pysnmp.hlapi import * from pysnmp import debug debug.setLogger(debug.Debug('all')) ntfOrg = sendNotification( SnmpEngine(OctetString(hexValue='8000000001020304')), UsmUserData('usrnameidentified', authKey='usrnameidentified', privKey='usrnameidentified', privProtocol=usmAesCfb128Protocol), UdpTransportTarget(('192.168.1.83',...
Hi, I tried to send a trap to a machine using the following command: snmptrap -e 8000000001020304 -v 3 -u usrnameidentified -a MD5 -A usrnameidentified -x AES -X usrnameidentified -l authPriv 192.168.1.83 162 SNMPv2-MIB::authenticationFailure I assume that the same is supposed to happen when i execute the below pysnmp code: ***from pysnmp.hlapi import from pysnmp.proto.api import v2c from pysnmp.entity import engine, config from pysnmp.carrier.asyncore.dgram import udp from pysnmp.entity.rfc3413...
I'd really advice you to open issues at GitHub instead -- the project has migrated from SF long ago! To answer your questions: 1) You should use dedicated SnmpEngine instances per thread, not per request. The SnmpEngine instance holds the whole lot of caches and these are not thread-safe. 2) I suspect this may have something to do with the SNMP engine discovery procedure which requires at least 2 additional request/response rounds per unknown/forgotten SNMP engine. If you tighten retries below that...
looking at wireshark i found out that there is a report as answer for my get-request This report has same request-id as get-request has an this report carries oid 1.3.6.1.6.3.15.1.1.4.0 that means usmStatsUnknownEngineIDs. It makes sense. But how can i handle (catch) this report?
i need snmp_v3 manager with custom auth and privicy levels for my job using this example i've made something alike: import sys from pysnmp.hlapi import * class snmp_worker(Thread): def __init__(self, requests, responses): Thread.__init__(self) self.requests = requests self.responses = responses self.snmpEngine = SnmpEngine() self.setDaemon(True) self.start() def run(self): while True: operation, authData, transportTarget, varNames = self.requests.get() snmp_response = 0 if operation == 0: try: snmp_response...
i need snmp_v3 manager with custom auth and privicy levels for my job using this example i've made something alike: import sys from pysnmp.hlapi import * class snmp_worker(Thread): def __init__(self, requests, responses): Thread.__init__(self) self.requests = requests self.responses = responses self.snmpEngine = SnmpEngine() self.setDaemon(True) self.start() def run(self): while True: operation, authData, transportTarget, varNames = self.requests.get() snmp_response = 0 if operation == 0: try: snmp_response...
That explains a lot ... the thing I actually want to use is ifAdminStatus which appears...
Why do you need to reference SMIv1 MIB objects (such as those in RFC1213-MIB)? Unless...
Hi there, I'm trying to use a property within the RFC1213-MIB and really having trouble....
Use mibdump.py from pysmi if you want to convert MIB by hand and run it with older...
i am working on pysnmp. i had worked on v2 and it was successful.to use more secured...
Another case where constraints violations is a problem. I'm walking FCMGMT-MIB::connUnitPortTable...
After 4.2.5, was libsmi2pysnmp removed? How does one convert a regular ANS.1 MIB...
Fix to pyasn1 in git master. Thank you!
Hi I'm playing with a MIB where I want to experiment with the range of values allowed...
I'd like to invite everybody interested to take a look at AES256 implementation 1,...
I'd like to invite everybody interested to take a look at AES256 implementation 1,...
I have the same problem. I am using a CISCO device and AES128 works fine, but AES256...
I made some more test, I think my pasted line for net-snmp was wrong, it returned...
According to the log, your agent returns HOST-RESOURCES-MIB::hrStorageAllocationUnits.2...
pysnmp fails on some HOST-RESOURCES-MIB:hrStorageAllocationUnits and net-snmp succed
Hi Any Suggestions or help to narrow down the issue.
Hi Ilya, Thanks for the response, included the full pysnmp debug. 2016-06-15 16:22:37,688...
Could you please provide full pysnmp debug for the case when you are not getting...
The Issue with unknownEngineID is i am trying to communicate with fabric IP, when...
***Hi All, I have been using pysnmp with v2 and i have successful communication with...
Hi, I am using the trap receiver given in this example http://pysnmp.sourceforge.net/examples/v1arch/asyncore/manager/ntfrcv/transport-tweaks.html...
This might help: reqCommunity = pMod.apiMessage.getCommuity(reqMsg)
I have taken the example given to set up a trap receiver http://pysnmp.sourceforge.net/examples/v1arch/asyncore/manager/ntfrcv/transport-tweaks.html#listen-for-notifications-at-ipv4-ipv6-interfaces...
I am trying to get data from an OID of a Cisco ASR 9010 router using the example...
I am trying to get data from an OID of a Cisco ASR 9010 router using the example...
I found Rich text comment/reply on SourceForge is not working... Might as well update...
False peak values once in a while
False peak values once in a while
Add detail description in a weird pattern...
Add detail description in a weird pattern...
False peak values once in a while
Hello there, I should change the title to False values once in a while, cuz I found...
Hello there I 've read the doc about pysnmp debug log setup Then run your app and...
We can rule out the possibility that wrong values are actually produced by SNMP Agents,...
I think the 'msgproc' subsystem will report PDU contents. So you will see all the...
Hello there I 've read the doc about pysnmp debug log setup Then run your app and...
False peak values once in a while
Let's first try to rule out the possibility that wrong values are actually produced...
False peak values once in a while
False peak values once in a while
snmpwalk.py from pysnmp-apps 0.4.0 returns one extra junk OID
Fixed in 0.4.1 Thanks for reporting!
snmpwalk.py from pysnmp-apps 0.4.0 returns one extra junk OID