[ aws . ec2 ]

advertise-byoip-cidr

Description

Advertises an IPv4 or IPv6 address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP).

You can perform this operation at most once every 10 seconds, even if you specify different address ranges each time.

We recommend that you stop advertising the BYOIP CIDR from other locations when you advertise it from Amazon Web Services. To minimize down time, you can configure your Amazon Web Services resources to use an address from a BYOIP CIDR before it is advertised, and then simultaneously stop advertising it from the current location and start advertising it through Amazon Web Services.

It can take a few minutes before traffic to the specified addresses starts routing to Amazon Web Services because of BGP propagation delays.

See also: AWS API Documentation

Synopsis

  advertise-byoip-cidr
--cidr <value>
[--asn <value>]
[--dry-run | --no-dry-run]
[--network-border-group <value>]
[--cli-input-json | --cli-input-yaml]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
[--cli-binary-format <value>]
[--no-cli-pager]
[--cli-auto-prompt]
[--no-cli-auto-prompt]
[--cli-error-format <value>]

Options

--cidr (string) [required]

The address range, in CIDR notation. This must be the exact range that you provisioned. You can’t advertise only a portion of the provisioned range.

--asn (string)

The public 2-byte or 4-byte ASN that you want to advertise.

--dry-run | --no-dry-run (boolean)

Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation . Otherwise, it is UnauthorizedOperation .

--network-border-group (string)

If you have Local Zones enabled, you can choose a network border group for Local Zones when you provision and advertise a BYOIPv4 CIDR. Choose the network border group carefully as the EIP and the Amazon Web Services resource it is associated with must reside in the same network border group.

You can provision BYOIP address ranges to and advertise them in the following Local Zone network border groups:

• us-east-1-dfw-2
• us-west-2-lax-1
• us-west-2-phx-2

Note

You cannot provision or advertise BYOIPv6 address ranges in Local Zones at this time.

--cli-input-json | --cli-input-yaml (string) Reads arguments from the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, those values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally. This may not be specified along with --cli-input-yaml.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. Similarly, if provided yaml-input it will print a sample input YAML that can be used with --cli-input-yaml. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command. The generated JSON skeleton is not stable between versions of the AWS CLI and there are no backwards compatibility guarantees in the JSON skeleton generated.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command’s default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.

--output (string)

The formatting style for command output.

• json
• text
• table
• yaml
• yaml-stream
• off

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

• on
• off
• auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

--cli-binary-format (string)

The formatting style to be used for binary blobs. The default format is base64. The base64 format expects binary blobs to be provided as a base64 encoded string. The raw-in-base64-out format preserves compatibility with AWS CLI V1 behavior and binary values must be passed literally. When providing contents from a file that map to a binary blob fileb:// will always be treated as binary and use the file contents directly regardless of the cli-binary-format setting. When using file:// the file contents will need to properly formatted for the configured cli-binary-format.

• base64
• raw-in-base64-out

--no-cli-pager (boolean)

Disable cli pager for output.

--cli-auto-prompt (boolean)

Automatically prompt for CLI input parameters.

--no-cli-auto-prompt (boolean)

Disable automatically prompt for CLI input parameters.

--cli-error-format (string)

The formatting style for error output. By default, errors are displayed in enhanced format.

• legacy
• json
• yaml
• text
• table
• enhanced

Examples

Note

To use the following examples, you must have the AWS CLI installed and configured. See the Getting started guide in the AWS CLI User Guide for more information.

Unless otherwise stated, all examples have unix-like quotation rules. These examples will need to be adapted to your terminal’s quoting rules. See Using quotation marks with strings in the AWS CLI User Guide .

To advertise an address range

The following advertise-byoip-cidr example advertises the specified public IPv4 address range.

aws ec2 advertise-byoip-cidr \
    --cidr 203.0.113.25/24

Output:

{
    "ByoipCidr": {
        "Cidr": "203.0.113.25/24",
        "StatusMessage": "ipv4pool-ec2-1234567890abcdef0",
        "State": "provisioned"
    }
}

Output

ByoipCidr -> (structure)

Information about the address range.

Cidr -> (string)

The address range, in CIDR notation.

Description -> (string)

The description of the address range.

AsnAssociations -> (list)

The BYOIP CIDR associations with ASNs.

(structure)

An Autonomous System Number (ASN) and BYOIP CIDR association.

Asn -> (string)

The association’s ASN.

Cidr -> (string)

The association’s CIDR.

StatusMessage -> (string)

The association’s status message.

State -> (string)

The association’s state.

Possible values:

• disassociated
• failed-disassociation
• failed-association
• pending-disassociation
• pending-association
• associated

StatusMessage -> (string)

Upon success, contains the ID of the address pool. Otherwise, contains an error message.

State -> (string)

The state of the address range.

• advertised : The address range is being advertised to the internet by Amazon Web Services.
• deprovisioned : The address range is deprovisioned.
• failed-deprovision : The request to deprovision the address range was unsuccessful. Ensure that all EIPs from the range have been deallocated and try again.
• failed-provision : The request to provision the address range was unsuccessful.
• pending-deprovision : You’ve submitted a request to deprovision an address range and it’s pending.
• pending-provision : You’ve submitted a request to provision an address range and it’s pending.
• provisioned : The address range is provisioned and can be advertised. The range is not currently advertised.
• provisioned-not-publicly-advertisable : The address range is provisioned and cannot be advertised.

Possible values:

• advertised
• deprovisioned
• failed-deprovision
• failed-provision
• pending-advertising
• pending-deprovision
• pending-provision
• pending-withdrawal
• provisioned
• provisioned-not-publicly-advertisable

NetworkBorderGroup -> (string)

If you have Local Zones enabled, you can choose a network border group for Local Zones when you provision and advertise a BYOIPv4 CIDR. Choose the network border group carefully as the EIP and the Amazon Web Services resource it is associated with must reside in the same network border group.

You can provision BYOIP address ranges to and advertise them in the following Local Zone network border groups:

• us-east-1-dfw-2
• us-west-2-lax-1
• us-west-2-phx-2

Note

You cannot provision or advertise BYOIPv6 address ranges in Local Zones at this time.

AdvertisementType -> (string)

Specifies the advertisement method for the BYOIP CIDR. Valid values are:

• unicast : IP is advertised from a single location (regional services like EC2)
• anycast : IP is advertised from multiple global locations simultaneously (global services like CloudFront)

For more information, see Bring your own IP to CloudFront using IPAM in the Amazon VPC IPAM User Guide .

PoolId -> (string)

The ID of the address pool associated with the CIDR.

IpamPoolId -> (string)

The ID of the IPAM pool associated with the CIDR.