https://sourceforge.net/p/mci73012src/2012-09-17T19:26:54.873000ZRecent changes to Project Philips MCI730/12 OpenSource2012-09-17T19:26:54.873000Z2012-09-17T19:26:54.873000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.nete1f707da9481da273d215887901c41db96b1bd7a

<pre>--- v51 +++ v52 @@ -166,5 +166,3 @@ Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Flags: medium devsel, IRQ 43 I/O ports at d8007b00 [disabled] [size=32] - -[[project_screenshots]] </pre>

2012-09-17T19:26:00.997000Z2012-09-17T19:26:00.997000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.net71219c196fed481b6f52ccbfa2a9fdd01733a125

<pre>--- v50 +++ v51 @@ -167,3 +167,4 @@ Flags: medium devsel, IRQ 43 I/O ports at d8007b00 [disabled] [size=32] +[[project_screenshots]] </pre>

2012-09-17T19:19:16.841000Z2012-09-17T19:19:16.841000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.neteda2147d019aa0e8a4b4ed92e5f9a19b1dd4d744

<pre></pre>

2012-09-17T01:17:47.475000Z2012-09-17T01:17:47.475000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.netb7c53f86542ccc1012b53c89eb8bae4517c2da1d

<pre></pre>

2012-09-17T01:17:11.183000Z2012-09-17T01:17:11.183000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.net951f47bb416caf4b80562ae4e6e24ccfd876ff12

<pre>--- v47 +++ v48 @@ -21,7 +21,7 @@ Power led| Probably /sys/devices/system/leds/leds0/event, no luck with turning it on or off, may be gpio controlled GPIO ports | A lot of GPIO exported by kernel to /proc/vt8500/registers/. No documentation found, but firmware using at least some of them to control device. Last byte on GPIO_005C - LCD brightness control, GPIO_0044 - sound related. USB ports | 2 USB 2.0 ports available, one is connected to the internal WIFI card and another one is available on front. -WIFI Card | Internally connected USB VT6656 card with non GPL driver loaded as module vntwusb.ko + modified wpa_supplicant. On my tests it works very unstable. +WIFI Card | Internally connected USB VT6656 card with non GPL driver loaded as module vntwusb.ko + modified wpa_supplicant. On my tests it works very unstable. [Link to driver and build instruction](http://codepasta.com/site/micro/mini2440/wifi-driver.php) Memory | 128Mb with 112Mb available to the kernel. No idea where are other 16Mb. Ethernet | 100Mb Ethernet VT6105/VT6106S connected to PCI (1106:3104) i2c bus | exported /dev/i2c/0, opened by firmware </pre>

2012-09-13T17:23:30.821000Z2012-09-13T17:23:30.821000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.netfd48f7c0f7c5b3a6177e151f0e5fb874ae0f54ec

<pre>--- v46 +++ v47 @@ -13,7 +13,7 @@ System board | VT8610 SoC CPU | ARM926EJ-Sid(wb) rev 5 (v5l), CPU architecture: 5TEJ, VIA-VT8610 hardware, _probably_ running on 150Mhz (see cat /proc/cpufreq and /proc/sys/cpu/0/speed*) LCD | VT8430(?) 320x240, with framebuffer driver, could be used as /dev/fb0 -FM Radio | Si4705-B20-GM/GU, managed with I2C, RDS on /dev/input/event2 +FM Radio | Si4705-B20-GM/GU [product page](http://www.silabs.com/support/pages/support.aspx?ProductFamily=FM+Receivers) and [Si47xx Programming Guide](http://www.silabs.com/Support%20Documents/TechnicalDocs/AN332.pdf), managed with I2C, RDS on /dev/input/event2 Sound | [WM8978](http://www.wolfsonmicro.com/products/codecs/WM8978/) chip. Playback is implemented via OSS interface (/dev/dsp). Volume control and sound routing is implemented with direct I2C commands. Remote control | handled by event0 and kbd, possible to read with cat /dev/input/event0 CDROM| Something on I2C bus. Probably only managed by firmware, sound directly routed to the amplifier. It is not seen as standard Linux cd. </pre>

2012-09-13T15:28:09.183000Z2012-09-13T15:28:09.183000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.net15f13e98f185bf741bd0802ac85948841559d037

<pre>--- v45 +++ v46 @@ -138,3 +138,32 @@ /dev/input/event1 - Headphones detector /dev/input/event2 - FM-RDS update interrupt. RDS is fetched with i2c commands /dev/input/event3 - LCD Touch-pad + +PCI Bus device list +----------------- + # ./lspci -v -i ./pci.ids.gz + 00:01.0 IDE interface: VIA Technologies, Inc. Device 1359 (prog-if 8f [Master SecP SecO PriP PriO]) + Subsystem: VIA Technologies, Inc. Device 1358 + Flags: bus master, medium devsel, latency 32, IRQ 3 + I/O ports at d8008100 [size=8] + I/O ports at d8008144 [size=4] + I/O ports at d8008180 [size=16] + + 00:02.0 Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] (rev 84) + Subsystem: VIA Technologies, Inc. Device 0106 + Flags: bus master, medium devsel, latency 64, IRQ 10 + I/O ports at d8004000 [size=256] + Memory at d8004000 (32-bit, non-prefetchable) [size=256] + Kernel driver in use: rhinefet + + 00:04.0 USB controller: VIA Technologies, Inc. USB 2.0 (rev 90) (prog-if 20 [EHCI]) + Subsystem: VIA Technologies, Inc. USB 2.0 + Flags: bus master, medium devsel, latency 22, IRQ 43 + Memory at d8007900 (32-bit, non-prefetchable) [size=256] + Kernel driver in use: ehci_hcd + + 00:05.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) (prog-if 00 [UHCI]) + Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller + Flags: medium devsel, IRQ 43 + I/O ports at d8007b00 [disabled] [size=32] + </pre>

2012-09-13T15:24:03.520000Z2012-09-13T15:24:03.520000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.netb389dc2d8df2a38d7ea41cda95726b9978c12ab9

<pre>--- v44 +++ v45 @@ -25,7 +25,7 @@ Memory | 128Mb with 112Mb available to the kernel. No idea where are other 16Mb. Ethernet | 100Mb Ethernet VT6105/VT6106S connected to PCI (1106:3104) i2c bus | exported /dev/i2c/0, opened by firmware -Flash memory | available as /dev/mtd*, seems to be 24Mb total size. +Flash memory | available as /dev/mtd*, seems to be 24Mb total size. Flash chip connected on SPI bus. Serial ports | Kernel cmdline contains console=ttyS0,115200n8, no /dev/ nodes found Touch screen | VT8500-TS, handled by mouse0 and event3 @@ -130,11 +130,11 @@ 0x1A - WM8978 (Sound card) 0x11 - Si4705-B20-GM/GU FM Radio. -0x18 - CD, used by firmware +0x18 - CD, managed by firmware Inputs -------------------- /dev/input/event0 - Philips Remote Controller and keys /dev/input/event1 - Headphones detector /dev/input/event2 - FM-RDS update interrupt. RDS is fetched with i2c commands -/dev/input/event3 - Keypad +/dev/input/event3 - LCD Touch-pad </pre>

2012-09-13T14:52:39.038000Z2012-09-13T14:52:39.038000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.netf9d7d89504e440a31b5d2192eeb26223e9553712

<pre>--- v43 +++ v44 @@ -10,7 +10,7 @@ Name | Description ------------- | ------------- -System board | VT8430 SoC +System board | VT8610 SoC CPU | ARM926EJ-Sid(wb) rev 5 (v5l), CPU architecture: 5TEJ, VIA-VT8610 hardware, _probably_ running on 150Mhz (see cat /proc/cpufreq and /proc/sys/cpu/0/speed*) LCD | VT8430(?) 320x240, with framebuffer driver, could be used as /dev/fb0 FM Radio | Si4705-B20-GM/GU, managed with I2C, RDS on /dev/input/event2 </pre>

2012-09-13T08:41:03.421000Z2012-09-13T08:41:03.421000ZAlex Samorukovhttps://sourceforge.net/u/samm2/https://sourceforge.net1e05b44b9f3965cb01707fb77fff7f64805a1905

<pre>--- v42 +++ v43 @@ -128,8 +128,8 @@ 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- -0x1A - WM8978_I2C_DEVICE_ADDR (Sound card) -0x11 - seems to be FM Radio. +0x1A - WM8978 (Sound card) +0x11 - Si4705-B20-GM/GU FM Radio. 0x18 - CD, used by firmware Inputs </pre>