Fixed bug that was hindering lane-changes due to invalid
cooperative speed adaptations. #1971
Fixed bug that was causing erratic lane changes when using
subsecond simulation. #1440
Fixed bug that was causing erratic lane changes in front of
intersections. #1856
Fixed right-of-way in regard to vehicles that were driving
across the same intersection twice. #2023
Vehicles waiting to enter a roundabout no longer yield to other
vehicles outside the roundabout. #1847
Pedestrians no longer walk past their specified arrival
position. #1780
Fixed asymmetrical pedestrian behavior when walking to a
busStop. Now they always walk to the middle of the busstop
rather than to its endPos. #1562
sumo-gui
Fixing crash when selecting Show all routes from the vehicle
menu.
When loading a gui-settings-file from the View Settings
dialog, the delay value is now correctly applied.
Fix bug that caused giant circles to appear when exaggerating
the width of lanes with short geometry segments.
Vehicle names are now drawn for vehicles that occupy multiple
edges. #1960
Fixed drawing of link indices, link rules, lane markings and bus
stops for left-hand networks.
Fixed error when reloading a network with <param>-elements. #1979
netconvert
Fixed missing connections in multi-modal networks. #1865
Fixed bug that caused invalid pedestrian crossings to be
generated after importing a .net.xml file. #1907
Fixed bug that caused pedestrian crossings to change their
priority when importing a .net.xml file. #1905
Fixed geometry bug when building pedestrian crossings and
walkingareas for left-hand networks.
Fixed invalid network after deleting edges at a joined traffic
light with controlled pedestrian crossing. #1902
Motorway ramps are no longer guessed if the lane permissions
indicate that the edge is not a motorway. #1894
Motorway ramps are no longer guessed at roundabouts. #1890
Fixed some cases when roads where invalidly guessed to be
roundabouts. #1933
When importing a .net.xml file the resulting network is no
longer modified due to automatic joining of edges that connect
the same nodes. #1930
When importing a .net.xml file with pedestrian crossings and
setting option --no-internal-links, the crossings and walkingareas are removed from
the resulting network. #1730
Several fixes in regard to OpenDrive networks:
Fixed missing <laneLink> elements when exporting networks as
OpenDrive. #1973
When patching an existing network with .nod.xml file, existing
traffic light programs are now preserved unless changes are
specified explicitly.
No longer patching loaded traffic light programs for new
crossings if they already have the correct state size.
When importing a .net.xml which was built for left-hand
traffic, the resulting network will also be built for left-hand
traffic. #1880
When importing a .net.xml, generated networks will retain the
same value of --junctions.corner-detail) as the input network. #1897
Fixed invalid geo-referencing in left-hand networks. #2020
Traffic lights that control multiple intersections no longer
create unsafe right-of-way rules. The edges that lie within the
traffic light are now controlled according to the appropriate
right of way (This does not necessarily model physical traffic
signals but reflects the behavior of drivers). #812
Old signal plans for these joined traffic lights no longer
work for new networks since more link states need to be
defined. The option --tls.uncontrolled-within<BOOL> was added to build networks that are
compatible with old-style signal plans. Note, that this may
create unsafe intersections, causing collisions.
netedit
When renaming an edge, the lane IDs are now updated as well. #1867
Fractional widths can now be set when inspecting edges.
Modifying traffic light plans which control multiple nodes is
now working. #2009
duarouter
Fixed invalid error when compiled without the FOX library. #1956
When using Vehicle commandmove to VTD,
the speed is set according to the covered distance where this is
deemed plausible (the value of set speed overrides this).
Tools
osmWebWizard.py no longer fails
when encountering path names with space-characters in them.
osmWebWizard.py no longer nests
output directories when generating multiple scenarios.
Vehicle types
now have vClass="passenger" by default. Earlier, the default was ignoring which would let
the vehicles drive along footpaths and railways.
Added option --duration-log.statistics<BOOL> which causes average vehicle trip data to be
printed in verbose mode
(average route length, travel time and time loss, ...) for quick
evaluation of a scenario. #1911
The option --max-num-vehicles<INT> can now be used to maintain a constant number of
vehicles in the network. Vehicle insertions are delayed whenever
this number would be exceeded. Previously this option would
terminate the simulation when the number was exceeded. To avoid
a large number of delayed vehicles it is recommended to use the
option --max-depart-delay<TIME>. #1958
Persons can now be tracked by selecting Start Tracking from
the context menu. #1779
The current route of pedestrians can now be shown by selecting
Show Current Route from the context menu. #1906
Error messages can now by clicked for jumping to the referenced
simulation object (i.e. a teleporting vehicle). #900
Added person statistics to network parameter dialog. #1898
Added new menu option Edit->Open in netedit for opening the
current network (at the current location) in
netedit.
Added new option Copy edge name to clipboard to the lane
popup-menu.
Added new options Close edge and Close lane to the lane
popup-menu. This will force vehicles (with an assigned vClass)
to wait until the corresponding lanes have been reopened (also
via popup-menu).
Added new option Add rerouter to the lane popup-menu. This
will make vehicles recompute their route when entering that
edge.
The size and color of link indices can now be customized (old
gui settings files
may have to be updated).
Average trip data (for completed vehicle trips) is now available
in the network parameter dialogue when running with option --duration-log.statistics.
Added new junction visualization option draw
crossings/walkingareas. #1899
Vehicles can now be colored by depart delay (the differences
between desired and actual depart time). Depart delay was also
added to the vehicle parameter dialog. #1970
Junction shapes are no longer drawn when their color is set to
fully transparent.
The network version is now shown in the network parameter
dialog.
The maximum number of connections per junction was raised from
64 to 256.
Added options --geometry.remove.keep-edges.explicit<STRING> and --geometry.remove.keep-edges.input-file<FILE> to exclude edges from being modified when
using option --geometry.remove. #1929
Added options --tls.cycle.time<TIME> to ensure that heuristically generated traffic
light plans have a fixed cycle length. The new default is 90
(s) which will have no effect on most 4-arm intersections but
will cause different timings for controlled 3-arm intersections
and other types. #1942
Added options --edges.join<BOOL> to select whether edges that connect the same
nodes (and have similar geometry) shall be joined into an edge
with multiple lanes. The new default is false (before, this
heuristic was always active). #1930
Added option --default.junctions.radius<FLOAT> for setting the default radius of
nodes. #1987
Added option --tls.left-green.time<TIME> to configure the default duration for the
dedicated left-turn phase. A value of 0 disables building this
phase. #1949
Added option --sidewalks.guess.exclude<STRING> to prevent guessing a sidewalk for the given list
of edges.
Added option --junctions.internal-link-detail<INT> for setting the number of geometry points for
lanes within intersections (Before, this was hard-coded as 5). #1988
Added option --crossings.guess.speed-threshold<FLOAT>. This allows setting the speed threshold above
which crossings will not be generated at uncontrolled nodes
(before this was hard-coded to 13.89m/s). #1819
polyconvert
Added option --fill<BOOL> to control whether polygons are filled by default
or not. #1858
Added option --shapefile.fill<STRING> to override the fill state when importing
shapefiles. Allowed values are [auto|true|false].
MESO-GUI
It is now possible to select individual vehicles, to examine
their parameters, track them and show their route just like for
sumo-gui. #1932
traceExporter.py now supports
exporting traces of persons when using the new option --persons<BOOL>.
Added option --ignore-gaps<BOOL> for
traceExporter.py. When this is
set vehicles will not be destroyed until the end of the fcd-file
even when disappearing for a few simulation steps..
The osmWebWizard.py
import script is now more robust in finding a suitable output
directory and recovering from errors.
Added new tool
tlsCoordinator.py
which coordinates traffic lights in a network for a given
traffic demand in order to create green waves for many vehicles.
Connection objects from networks parsed via
Sumolib can now return
getTLLinkIndex as well as getJunctionIndex. #2048
Fixed default arrivalPos when loading <trip> or <flow> elements using
attributes from, to directly into SUMO. #1739
Fixed crash when specifying consecutive walks for the same
person. #1781
Fixed bug that caused pedestrians to get too close to each
other. #1769
Fixed crash and other bugs when using option --lanechange.duration. #1152, #1795, #1796, #1797
Fixed bug that sometimes caused the rear end of vehicles to be
placed on the wrong lane after lane-changing. #1804
Rerouters where closed edges are disabled for specific vehicle
classes now cause these vehicles to wait until the closing ends
if the destination edge is closed.
Vehicles with a <stop> in their route are now being overtaken if there
is sufficient space. This was causing problems when modeling
parked vehicles on a multi-lane road.
Fixed bug that resulted in invalid routes when routing at
simulation time (at intersections where a required connection
originates from a prohibited lane). #1861
sumo-gui
Fixed centering of names on objects (a large mismatch was
visible for persons).
Polygons are no longer drawn when setting their
size-exaggeration to 0.
duarouter
Custom car following model specification is now preserved in the
route output. #1832
Fixed bug when using option --remove-loops where the start/destination edge
changed needlessly.
Vehicles may now depart/arrive at any TAZ regardless of their
vehicle class.
netconvert
When adding crossings to a .net.xml without internal links,
the output network will be built with internal links. #1729
Fixed bug where duplicate crossings between the same pair of
walkingareas where sometimes build when using option --crossings.guess. #1736
Fixed bugs where loading a .net.xml file and removing edges
would lead to an invalid network. #1742, #1749, #1753
Permissions are no longer lost when guessing ramps. #1777
Defining pedestrian crossings at a node with type="traffic_light_unregulated" now works. #1813
Fixed invalid TLS-plans when loading a .net.xml file with
TLS-controlled pedestrian crossings.
Connections between lanes with incompatible vehicle classes are
no longer generated. #1630
Fixed generation of connections at intersections with dedicated
bicycle lanes (symptoms were invalid connections and missing
connections).
Modifying lane permissions in a network with crossings, so that
crossings are no longer valid, is now working (invalid crossings
are removed with a warning).
Fixed bug that caused invalid lane lengths when building with
option --no-internal-links (near intersections with sharp angles).
Fixed some invalid clusters when using option --junctions.join.
Lanes which disallow passenger cars (i.e. paths and service
roads) now have a distinct shade of grey. The color can be
customized in the gui-settings dialog.
Vehicles now activate their blinker during continuous lane
change manoeuvres.
The types of POIs and Polygons can now be displayed via View
Settings. #1803
The personNumber,containerNumber,personCapacity,containerCapacity information for a vehicle is now shown in the parameter
dialog. #1617
The GUI asks at simulation end whether all files and windows
should be closed
netconvert
added option --remove-edges.input-file<FILE> which works as an analogue to --keep-edges.input-file. Giving either
option a selection file (where edge ids are prefixed with
edge: as argument is now supported.
added option --ramps.unset<STRING> which works as an analogue to --ramps.set and prevents edges
from being treated as on- or off-ramps. #1763
Now importing signalized pedestrian crossings from
OSM (<tag k="crossing" v="traffic_signals"/>).
when splitting an edge, the new node is not removed by option --geometry.remove
even when speed and lane count remain unchanged. #1842
Connections from and to sidewalks are only generated when also
building pedestrian crossings since they are superfluous
otherwise. When using pedestrian model nonInteracting these
connections are not used (pedestrians jump across
intersections between any two sidewalks) and when using model
striping, crossings are mandatory.
Improved control over edge types (typemaps) when importing from
OSM. All defaults
can now be overridden in a transparent manner and it's easier to
add additional modes of traffic than ever before (see documentation).
Option --lefthand now works for generating networks with left-hand
traffic. Thanks to Andrea Fuksova for suggesting the
double-mirroring technique.
Additional attributes are now supported to specify the node that
is generated when splitting an edge. #1843
duarouter
option --ignore-errors now also applies if no input trips/routes are loaded.
Added option --bulk-routing<BOOL> to improve routing speed when many (similar)
vehicles depart at the same time from the same location. The
time aggregation can be controlled using option --route-steps<TIME> The bulkstar
routing algorithm is now obsolete and no longer supported. #1792
Added options --repair.from<BOOL>, --repair.to<BOOL> which attempts to repair invalid source or
destination edges in the route input.
added method traci.vehicle.getStopState() to the python API(command 0xb5). Also added
convenience methods traci.vehicle.isStopped(),
traci.vehicle.isStoppedParking,
traci.vehicle.isStoppedTriggered().
An updated version of the Bologna scenarios can be found on
the sourceforge download page.
This contains minor network fixes and contains a new pedestrian
version of the acosta-scenario
Documentation
Added new tutorial
Tutorials/TraCIPedCrossing
which shows how to build a pedestrian-actuated traffic light
controller.
fixed bug that was causing vehicles to brake prematurely when
turning left on a prioritized road. #1566
fixed crash when pedestrians were using the same edge twice in a
row. #1555
fixed crash when pedestrians were given a disconnected route. #1578.
Now disconnected routes are an error which is recoverable (by
teleporting) using option --ignore-route-errors
pedestrians with a disconnected trip now properly reach their
destination (if the option --ignore-route-errors is given). #1581
corrected reading the PHEMLIGHT_PATH environment variable
simulation now properly terminates when loading a <trip> with a from-edge
that is shorter than the vehicle. #1559
vehicles no longer collide (visually) within an intersection
when using the
endOffset attribute. #970
fixed crash when attempting to load an additional tls program
with unused phase states. #1641
fixed crash when specifying duplicate person ids. #1650
netconvert
when adding sidewalks via
type-map and a sidewalk
already exists, the edge now remains unchanged.
fixed bug where some generated pedestrian crossings at
T-intersections had a permanent red light. #1363
fixed bug where right-turning vehicles had the green light
during the left-turn phase when pedestrian crossings where
present.
the width of adjacent sidewalks is now taken into account when
computing the width of a walkingarea.
fixed bug where an invalid network was generated when declaring
a pedestrian crossing at a dead-end node. #1366
fixed bug in computation of walkingarea shape. #1257
fixed bug in connection computation when some connections were
explicitly deleted (also applied to some OSM turn-restrictions). #1457
changing offset or algorithm type with .tll.xml file for TLS
loaded from a .net.xml file without changing the phases now
works. #1207
when loading <split> elements along with a .net.xml file, existing
connections are preserved whenever possible. #1353
Fixed 3D-geometry of internal lanes at elevated junctions. #1526
Fixed invalid connections when generating ramps. #1529
Fixed invalid geometry when generating ramps. #1535
fixed bug where user defined connections were ignored at
intersections with one incoming and one outgoing edge. #1552
fixed crash when loading a sumo net with pedestrian crossings
and removing edges via options. #1557
fixed errors when building pedestrian crossings. #1582
fixed invalid connections at edges with sidewalks. #1586
fixed positioning of internal junctions at turnarounds when
using the
endOffset attribute. #1589
when importing from OSM, compound types now honor the setting discard="true" of the individual component types.
fixed junction shape when using lanes with custom width. #1604
user-defined node shapes are now correctly imported from
.net.xml files. #1450
lane-specific settings are no longer lost when applying an
.edg.xml patch file to an existing network definition. #1609
fixed some of the bugs that were causing inappropriate node
shapes.
several fixes to the placement of internal junctions (waiting
positions on the intersection for selected connections)
removed some internal junctions that were not necessary
repositioned internal junctions so that the waiting vehicles
do not overlap with foe vehicles #1611
moved internal junctions at TLS-controlled nodes further
towards the junction center (previously they respected foe
vehicles which would never get the green light at the same
time)
fixed invalid junction logic (right-of-way rules) when incoming
edges had uncommon angles. #1632#1462
generate tls logic now matches the underlying edge priorities.
The streams that would have priority if the node type was
"priority" now always have a common green phase. #1642
the attribute controlledInner is now correctly exported to plain-xml output
when importing a .net.xml where edges within a joined TLS are
controlled. #1264
fixed bug that was causing the wrong flow to receive the right
of way at priority junctions. #1689
Fixed crash when using a vehicle parameter window while the
vehicle disappears. #1534
Coloring by loaded edge weight now correctly reflects changes
over time.
Edges/Lanes set to transparent (alpha = 0) are no longer drawn
when zoomed out.
The view-settings dialog can no longer become hidden when
switching between displays with a different resolution. #1512
Traffic-light show phase dialog no longer crashes when loading
very long phases. #1451
fixed visualization of closed edges in rerouters
Lane coloring by inclination now correctly shows the
direction. #1526
The checkbox Streets->'show rails' in the gui-settings dialog
can now be used to toggle the visualization style of railways.
The edge width exaggeration factor is now properly saved to and
loaded from a
gui-settings-file.
fixed gui glitch when zooming with transparent lanes in view.
now drawing vehicles on transparent lanes.
Selecting the Center action from a popup-menu immediately
centers the view on that object (instead of delaying until the
next window update). #1593
when an error occurs during the initial route loading, reloading
the simulation will now work after the user corrects the error
in the input files. #1508
duarouter
no longer building invalid routes when the connectivity among
edges differs between vClasses. #303
fixed bug that caused unreasonable detours in pedestrian routes
(also affected routing in the simulation). #1556
all routers
Unknown vehicle type in <flow> element can now be ignored with option --ignore-errors.
Tools
cutRoutes.py now sorts
unmodified departure times correctly.
server.py no longer
creates disconnected routes. Also, trains will no longer be
generated on inappropriate edges.
Added option --pedestrian.striping.jamtime<TIME> to control behavior of jammed pedestrians. By
default, pedestrians will now start squeezing through the jam
after being stopped for that time. As a consequence, pedestrian
scenarios now always terminate.
Added option --output-prefix<FILE> to automatically add a prefix to all output files.
The special string TIME is replaced with the current time.
Rerouters can now set permitted vehicle classes on closed lanes,
see #1518
A warning is now issued when a loaded network contains unsafe
connections. #447
A new car-following class based on the original Krauß was added
that that takes into account the maximum acceleration ability
computed by PHEMlight
Added option --netstate-dump.precision<INT> to control the precision (number of digits after
the dot) of vehicle positions and speeds when using option --netstate-dump.
Added vehicle class ship.
option --ignore-route-errors now also handles errors which prevent the vehicle from
being inserted into the network. #1661
Added option --device.rerouting.output<FILE> to export the travel times which are used for
dynamic rerouting during every adaptation interval. #1663
sumo-gui
Can now color and scale lanes by average speed and by by
average relative speed (relative to the speed limit).
Added option for drawing the path across the current walkingarea
to the person popup menu.
Can now color pedestrians randomly.
When drawing persons as triangles, the direction they are facing
is now indicated (it was ambiguous for equilateral triangles).
The lane menu now shows the height under the cursor as well as
the offset (pos).
Can now color lanes by height at segment start and by by
inclination at segment start. This allows investigating the
3D-geometry in detail.
Added paramshow-detectors that allows showing detectors of actuated
traffic lights in the GUI.
When drawing streets with exaggerated width, the edge in one
direction no longer overlaps with the opposite direction. #1540
Now setting window title when loading config or net at
application start.
Markings for bike lanes are now drawn at road intersections
(bike lanes are lanes which only allow vClass bicycle).
Added options for saving the current viewport and simulation
delay along with the current visualization settings. #1625
netconvert
read heightmaps from GeoTIFFs for instance SRTM data#1495
when adding sidewalks via
typemap or --sidewalks.guess, permissions on
all other lanes are now automatically set to disallow
pedestrians. #1507
sidewalks can now be added for specific edges by adding the
attribute sidewalkWidth="<width_in_m>" to <edge>-elements in .edg.xml-files. This automatically
remaps any existing connections. #1580
when using pedestrian crossings and green verges (lanes which
disallow all vClasses), the crossing now starts at the side of
the ride instead of the green verge. #1583
Added option --sidewalks.guess.from-permissions<BOOL>. This adds sidewalks for edges that allow
pedestrians on any of their lanes regardless of speed. #1588
Added option --junctions.corner-detail<INT> which can be used to generate rounded intersection
corners. #1606
user-defined shapes for internal lanes, crossings and
walkingareas are now supported via the new customShape-element in .con.xml files #1607
right-turning road vehicles will now wait within the
intersection when yielding to straight-going bicycles. #1255
netgenerate
can now generate networks with unregulated intersections. #1558
polyconvert
added option --output.plain-geo<BOOL> for writing POIs and polygons with
geo-coordinates. #1608
netedit
can now visualize railways the same way as sumo-gui. #1542
can now disable drawing of junction shapes via gui-settings.
can now load all types of shapes from the menu.
can now undo/redo bulk selection/deselection of objects. #1614
added option for auto-selecting an edges nodes.
can now modify the nodes of an edge via the attribute dialog. #1662
the attribute panel is now updated on undo/redo/recompute. #696
when creating a reverse edge with spread type center, the new
edge is shifted sideways and given new endpoints.
can now move the view in 'Create Edge'-mode by holding Ctrl
Tools
sort_routes.py now
supports sorting persons and also copies additional elements
(such as vType to the output).
cutRoutes.py can now
handle nested stops in a vehicle definition.
added routeStats.py for
computing statistics on route length.
added traceExporter.py option --orig-ids<BOOL>
for keeping the original vehicle IDs instead of a running index.
For some output formats such as NS2 this only works if the
vehicle IDs are numeric to begin with.
route2trips.py now preserves vType elements.
server.py now starts
with 'real world' gui settings and initial delay of 20. Also,
the trip generation settings have been tweaked for realism (i.e.
shorter pedestrian trips, longer train routes)
TraCI
Several simulation entities support named string parameters in their
XML-definitions. These can now be set and retrieved via TraCI and via the python library for the
following entities: Edge, Lane, Person, Vehicle, VehicleType,
PoI, Polygon, Route, TrafficLight