================================================
Product:        FDOT CADD Software
Version:        FDOT2004 MR4, version 2004.01.05
Date:           September 10, 2007 
================================================


===================================
SOFTWARE VERSION NOTIFICATION
===================================

FDOT2004 MR4

This Maintenance Release is an incremental upgrade to FDOT2004, Maintenance 
Release 1 (MR1), Maintenance Release 2 (MR2), or Maintenance Release 3 (MR3)
and the Hotfix to Maintenance Release 3.  

You must have FDOT2004, MR1 MR2 or MR3 installed in order to successfully 
install FDOT2004, Maintenance Release 4 (MR4).  The installation software will 
check for the presence of FDOT2004 and prior MRs before proceeding to install 
FDOT2004 MR4.  If you do not have FDOT2004, MR1, MR2 or MR3, you may purchase 
a CD-ROM FDOT2004 MR1 at FDOT Maps and Publications Sales at the following URL: 

http://www.dot.state.fl.us/mapsandpublications/

This Maintenance Release requires all client MicroStation installations to be 
version 08.05.02.55 or 08.05.02.56.  Note that version 08.05.02.55 of 
MicroStation is a "SELECT Build" by Bentley (SELECT Subscribers can download
from the Bentley Select Website).

Version 08.05.02.56 of MicroStation is a "PRIORITY Build" by Bentley and can be 
downloaded at: 

ftp://pribuilds:micro.station@ftp.bentley.com/pribuilds/microstation/ms08050256en.zip


This Maintenance Release also requires all client GEOPAK installations to be 
version 08.08.02.73, or have Bentley Civil Extension 2004 Edition version 
08.08.02.73 installed. 

Bentley SELECT subscribers can download GEOPAK 08.08.02.73 or Bentley Civil 
Extension 2004 Edition version 08.08.02.73 from the Bentley SELECT Website. 

If your clients or local workstation do not have the versions needed by this 
Maintenance Released already installed, DO NOT install this Maintenance 
Release. 

FDOT 2004, Maintenance Release 4 is specifically designed for these versions 
of MicroStation described before, and most likely will not function properly 
on any other versions.  Also, the maintenance release is designed to be used 
with Windows XP, running Internet Explorer 6 or higher.  
Other versions of the Windows Operating  System have not been tested and may
not work. 

===================================== 
Recommendation for Client / Server Deployment
=====================================

Since the possibility exists that a given site may have numerous clients 
running FDOT2004, MR3 (or earlier - which are based on earlier versions of 
MicroStation and GEOPAK than what is required for FDOT2004 MR4), it is 
recommended that FDOT2004 MR4 be installed on Servers in an alternate location 
(making two separate installs of FDOT2004 in different folders).  This will 
allow existing client users to point to their current, functioning version of 
the MR1, MR2 or MR3 software until the time when their client machine is ready for 
upgrade, and can be pointed to the location where MR3 is installed on the 
server. 
 
A newly created FDOT2004, MR1 MR2 or MR3 install on the server in the alternate 
location can then be upgraded to FDOT2004, MR4 without affecting any currently 
connected clients who do not have the required MicroStation versions of 
MicroStation or GEOPAK / Bentley Civil Extension 2004 Edition installed. 

As client machines are upgraded with the required versions of 
MicroStation/GEOPAK/Civil Extension, they can be redirected to point to the 
FDOT2004, MR4 install folder.  This will allow for clients to be moved to the 
new software installation as time and resources permit. 

 
===================================== 
Automatic Updates for Clients 
===================================== 

Beginning with FDOT2004 MR2, a new feature was available that will allow 
FDOT2004 Clients to check for, and install local updates to software from the 
server to their local computer as needed. 

This is an optional feature. During installation of the FDOT2004, MR4 update 
to the Server, you are be given the option to enable the automatic client 
updates when installing the Maintenance Release.  It is highly recommended 
that this option be enabled as it eases the distribution and installation of 
client components of FDOT2004, MR4 such as the Electronic Delivery Software 
updates. 

It works by using local MicroStation configuration files to check for a key 
file on the user's workstation.  If the key file is found nothing happens.  If 
the key file is not found, an application is started on the client workstation 
the next time they enter MicroStation, that will ask the user if they would 
like to install the available update.  It will ask each time MicroStation is 
started until the update is processes and key files are installed.  
Administrative rights are not required by the client to update their 
workstation.  The automatic updated application will copy ZIP files from the 
server and extract them to the necessary locations on the client workstation.  
This has two main benefits.  It reduces administrators having to visit client 
machines to install updates (administrative access in not required to extract 
zip files allowing users to process the update on demand) and minimizes 
network traffic. 

The FDOT2004 Suite contains both programs and support files for MicroStation, 
GEOPAK, CAiCE and Windows-based applications. All of the programs, with the 
exception of the server install for the FDOT CADD software, are intended to be 
installed on the local workstation.  For additional information on the Windows 
applications included, see their individual installation documentation or help 
files. 

After the Client Update is installed, EDI2 must be re-configured to update the 
plotting commands, etc. The procedure is as follows:

1.	Install the MR3 release on the Server (or a stand-alone workstation).
2.	Run MicroStation to update the client components
3.	Run EDI from the Electronic Delivery Desktop 
4.	The next time EDI runs from the Electronic Delivery Desktop, EDI will attempt
	to re-configure itself.  Select the defaults.

The EDI configuration will be up-to-date.


=======================================================================
Other Installation Notes about FDOT2004, including previous Maintenance 
Releases
=======================================================================

To properly install the software on a server, or update  stand-alone 
workstation installations, you must have administrator privileges. This is 
necessary for the install to write to the registry, create shortcut icons in 
the appropriate directories, and to add dll's. Although the FDOT CADD software 
seems to install and run on Windows 2000, it has not been certified for this 
platform. 

The software will set a system environment variable: "FDOT2004" - This 
variable points to the location of the FDOT2004 directory. "FDOT2004Local" - 
This variable points to the location of the FDOT2004 directory on the local 
machine. Specifically points to location of standalone apps for client. 

The Client and Workstation Installation programs will also set the Following
registry entries:

HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\MicroStation\DataPath
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\MicroStation\Version
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\InstallType
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\LocalPath
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\ProjectPath
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\SitePath
HKEY_LOCAL_MACHINE\SOFTWARE\FDOT\FDOT2004\Version

Note: The Server Installation doesn't set any registry entries or environment 
variables. 


=====================================
FDOT2004 Directory Structure changes
=====================================

The installation will create a directory \FDOT2004 where the user specifies. 
This directory can be created at the root directory level of the drive, or 
under an existing directory folder.  FDOT recommends the user install the FDOT 
software at the default directory level on the drive selected. 

Nearly all of the FDOT programs and support files are now located under the 
\FDOT2004 directory as described above.  The exceptions include the local 
MicroStation and CAiCE configuration files. 


=====================================
FDOT2004 sub-directory structure
=====================================

caice			(CAiCE support files)
docs			(MS Word and Adobe PDF format documentation files)
geopak			(GEOPAK support files)
group			(Control files)
macros			(MicroStation macros)
mdlapps         	(MicroStation MDL programs)
microstation    	(MicroStation configuration files and toolboxes)
project_template	(Seed FDOT project directory structure)
qc_rules		(QC rule files and resources)
SiteMenu		(SiteMenu files)
standards		(Standard resources used by MicroStation in FDOT workspaces)
temp			(Temporaty files directory
v7			(V7 resources used by FDOT2002 workspaces)
vba			(MicroStation VBA Applications)
win32           	(Windows 32 bit programs)

Three folders MUST be open for Read, Write, and Execute (R-W-X) in the users 
working profile.  These are: 

\fdot20042\temp\ 
\fdot2004\win32\ (and all sub directories) , on the local machine
& the MicroStation directory, (..\bentley\workspace\), on the local 
machine

In addition to this, both GEOPAK and MicroStation write temporary files on the 
fly and require R-W-X access on their directory structure to work properly. 

The following folders contain software for FDOT2002 MicroStation J projects

Win32\EDI1
Win23\Journal
win32\MSBP


=====================================
HTM Help files
=====================================

Help documentation is available in HTML format from the SiteMenus. To access 
the help click on the document icon just left of the menu item. 


=====================================
MicroStation Configuration Files
=====================================

There are 12 configuration files delivered with the FDOT2004 software:

\fdot2004\microstation\workspace\users\rightofway.txt
\fdot2004\microstation\workspace\users\roadway.txt
\fdot2004\microstation\workspace\users\RoadwayV7.txt
\fdot2004\microstation\workspace\users\sitefdot.txt
\fdot2004\microstation\workspace\users\SiteFdotV7.txt
\fdot2004\microstation\workspace\users\structures.txt
\fdot2004\microstation\workspace\users\StructuresV7.txt
\fdot2004\microstation\workspace\users\Utilities.txt
\fdot2004\microstation\workspace\users\consultant.txt
\Bentley\Workspace\users\FDOT2004.ucf
\Bentley\Workspace\users\FDOT2002_V8.ucf
\Bentley\Workspace\users\FDOT2002_V7.ucf

- rightofway.txt - is a site configuration file for the Right of Way SiteMenu. 
The rightofway.txt file sets some of the standard configuration variables, 
such as those for fonts and custom line styles. The user configuration files, 
sitefdotmet.ucf and sitefdoteng.ucf call this file when the Right of Way 
SiteMenu is selected. 

- roadway.txt - is a site configuration file for the Roadway SiteMenu. The 
roadway.txt file sets some of the standard configuration variables, such as 
those for fonts and custom line styles. The user configuration file, 
FDOT2004.ucf calls this file when the Roadway SiteMenu is selected. 

- roadwayV7.txt - is a site configuration file for the Roadway SiteMenu when 
using the FDOT2002_V7 and FDOT2002_V8 Workspaces. The roadwayV7.txt file sets 
some of the standard configuration variables, such as those for fonts and 
custom line styles. The user configuration files, FDOT2002_V7.ucf and 
FDOT2002_V8.ucf call this file when the Roadway SiteMenu is selected. 

- sitefdot.txt - is a site configuration file for the FDOT standard files. The 
sitefdot.txt file sets all of the standard configuration variables, such as 
those for fonts and custom line styles. It also initiates the FDOT MDL 
applications. The user configuration file, FDOT2004.ucf calls this file. 

- sitefdotV7.txt - is a site configuration file for the FDOT standard files 
when using the FDOT2002_V7 and FDOT2002_V8 Workspaces. The sitefdotV7.txt file 
sets all of the standard configuration variables, such as those for fonts and 
custom line styles. It also initiates the FDOT MDL applications. The user 
configuration files, FDOT2002_V7.ucf and FDOT2002_V8.ucf call this file. 

- sitefdotV7.txt - is a site configuration file for the FDOT standard files 
when using the FDOT2002_V7 and FDOT2002_V8 Workspaces. The sitefdotV7.txt file 
sets all of the standard configuration variables, such as those for fonts and 
custom line styles. It also initiates the FDOT MDL applications. The user 
configuration files, FDOT2002_V7.ucf and FDOT2002_V8.ucf call this file. 

- structures.txt - is a site configuration file for the Structures SiteMenu. 
The structures.txt file sets some of the standard configuration variables, 
such as those for fonts and custom line styles. The user configuration file, 
FDOT2004.ucf calls this file when the Structures SiteMenu is selected. 

- structuresV7.txt - is a site configuration file for the Structures SiteMenu 
when using the FDOT2002_V7 and FDOT2002_V8 Workspaces. The structuresV7.txt 
file sets some of the standard configuration variables, such as those for 
fonts and custom line styles. The user configuration files, FDOT2002_V7.ucf 
and FDOT2002_V8.ucf call this file when the Structures SiteMenu is selected. 

- Utilities.txt - is a site configuration file for the Utilities SiteMenu. The 
Utilities.txt file sets some of the standard configuration variables, such as 
those for fonts and custom line styles. The user configuration file, 
FDOT2004.ucf calls this file when the Utilities SiteMenu is selected. 

- consultant.txt - is a site configuration file for the consultant customizations.
The consultant.txt is installed as a blank text file as a place holder for possible
site specific customizations. The user configuration file, FDOT2004.ucf calls this 
file when the when the include statement is uncommented. 

- FDOT2004.ucf - User configuration file for the FDOT2004 workspace. This file 
contains configuration variables that are normally user specific such as the 
editor to use, and SiteMenu positions, and so on. This file can be edited with 
a text editor, or from within MicroStation's menu option:
 Workspace > Configuration. 

- FDOT2002_V7.ucf - User configuration file for the FDOT2002_V7 workspace. 
This file contains configuration variables that are normally user specific 
such as the editor to use, and SiteMenu positions, and so on. This file can be 
edited with a text editor, or from within MicroStation's menu option:
 Workspace > Configuration. 
 
- FDOT2002_V8.ucf - User configuration file for the FDOT2002_V8 workspace. 
This file contains configuration variables that are normally user specific 
such as the editor to use, and SiteMenu positions, and so on. This file can be 
edited with a text editor, or from within MicroStation's menu option:
 Workspace > Configuration. 


=====================================
QC Standard Rule Files
=====================================

The Rule files are binary files containing the allowed elements and their 
defined symbology for each standard design file. By default, the FDOT2004 
workspace points to the '2004 version of the FDOT QC Standard Rule files and 
the FDOT2002_V7 and FDOT2002_V8 Workspaces point to the '2002 version of the 
FDOT QC Standard Rule files. However, rules are available that match the FDOT 
CADD Standards for the 2001, 2000, '98 and '96 software releases. These can be 
selected by browsing to the appropriate directory. 

The QC standards directories are:

\FDOT2004\qc_rules\std_2004\
\FDOT2004\qc_rules\std_2002\
\FDOT2004\qc_rules\std_2001\
\FDOT2004\qc_rules\std_2000\
\FDOT2004\qc_rules\std_98\
\FDOT2004\qc_rules\std_96\

The QC software requires an INI file (resymbol.ini) to operate. The location 
of this file is defined by a MicroStation configuration variable in the 
SITEFDOT.TXT or SITEFDOTV7.TXT file.  By default, the FDOT configuration file 
points to the \Bentley\workspace\users\. The installation program copies a 
resymbol.ini with default settings already defined to that location. This user 
must have R-W-X rights to this file. 


=====================================
FDOT2004 SiteMenu
=====================================

The release of the FDOT2004 CADD Software uses the ProSoft SiteMenu. SiteMenu 
is a floating menu bar, used to activate commands inside MicroStation. All 
disciplines are displayed on a single bar and can be turned on and off by the 
user as needed. 

SiteMenu is an interface development toolkit used to deploy CAD standards and 
design automation in MicroStation and AutoCAD. SiteMenu offers customizable 
menu bars, a command spreadsheet dialog, and an integrated browser  each 
designed to conserve screen space while enforcing CAD standards. SiteMenu is 
used to run commands; set drawing attributes such as layer, color, line style, 
and weight; load symbols (blocks and cells) and settings; launch macros, MDLs, 
ARX, and AutoLISP applications; and link to custom user documentation.

SiteMenu is developed by ProSoft.

Founded in 1985, ProSoft provides innovative solutions to architectural and 
engineering firms, government agencies, utility companies, and manufacturers 
involved in computer-aided design using AutoCAD and MicroStation.

ProSoft helps its clients leverage their investment in technology and 
personnel by delivering products and services designed to increase 
productivity, quality, and control. Products and services include: 

- Original hardcopy and electronic training courseware 
- CAD standards solutions for AutoCAD and MicroStation 
- On-site instructor-led training classes 
- Custom software application development 
- CAD management consulting services 
- Quality, expertise and attention-to-detail are the hallmarks of ProSoft. 

Our mission is to provide products, creativity, and expertise to help you 
reach your goals. 
  
Professional Software Solutions, Inc. 

http://www.prosoftnet.com/

1776 North State, Suite 200
Orem, UT 84057 USA 
(801) 225-5955 
(888) 263-0393 - toll-free
(801) 225-8333 - fax

Non-FDOT users of the Sitemenu will need to register their copy of SiteMenu
with ProSoft.


=====================================
Utilities from cadgurus.com
=====================================

Included on this CD are some free utilities that are available from the 
www.cadgurus.com website. This website is the property of Ramsey Systems, Inc. 
It was founded by Mary Ramsey in 1997. Ramsey Systems is committed to 
providing high end design automation consulting including custom CAD software 
development, training, and support. 

Custom Software - Ramsey Systems will develop MDL, C++, Macro, VB, or ASP, 
.NET, applications to your specification. Provide training - Ramsey Systems 
has Bentley and AEC Designware certified trainers. 

Mary A. Ramsey - Ms. Ramsey is CEO of Ramsey Systems, Inc. and Executive 
Editor of cadgurus.com. 


=====================================
GhostScript
=====================================

GhostScript is the name of a set of software that provides an interpreter for 
the PostScript (TM) language, with the ability to convert PostScript language 
files to many raster formats, view them on displays, and print them on 
printers that don't have PostScript language capability built in.  GhostScript 
is also an interpreter for Portable Document Format (PDF) files, with the same 
abilities, including the ability to convert PostScript language files to PDF 
(with some limitations) and vice versa.GhostScript also contains A set of C 
procedures (the GhostScript library) that implement the graphics capabilities 
that appear as primitive operations in the PostScript language. 

Portions of the FDOT2004 software release reference the Aladdin Free Public 
License (AFPL) of GhostScript.  The terms of this license can be found at the 
following website:  

http://www.cs.wisc.edu/%7Eghost/doc/cvs/Public.htm

AFPL GhostScript is distributed "as-is", and there is no warrantee or 
guarantee, express or implied, by any party including the program's authors to 
its functionality or performance.  Both FDOT and the authors and other shall 
be held harmless is any and all claims arising from the use of GhostScript and 
any derivative works based upon Ghostscript. 

AFPL GhostScript may be obtained here:

http://www.cs.wisc.edu/~ghost/doc/AFPL/get851.htm

A a graphical interface for Ghostscript written by Russell Lang at Ghostgum 
Software Pty Ltd is also available at the following: 

http://www.cs.wisc.edu/~ghost/gsview/index.htm


=====================================
CSDiff
=====================================

ComponentSoftware Diff Version 5.0

CSDiff is part of CS-RCS -- GNU RCS compatible revision control system for 
Windows.  You may use CSDiff free of charge. Refer to the file LICENSE.TXT for 
full license agreement and disclaimer of warranty.

For tips, tricks and to join the CSDiff mailing list, visit CSDiff home page at:
         http://www.ComponentSoftware.com/products/csdiff/

		 Copyright  1997-2005 ComponentSoftware, Inc.


=====================================
Support and Services Information
=====================================

For additional questions regarding this installation, please contact the FDOT 
Engineering / CADD Systems Office at (850) 245-1600 or email questions to 
ecso.support@dot.state.fl.us. 

For updates to the files on this delivery, please check the FDOT ECSO Website: 
www.dot.state.fl.us\ecso\ 


======================
END OF README.TXT FILE
======================