Recent changes to wiki

Home modified by Deta Novian Anantika Putra

2021-08-12T10:22:27.124000Z

--- v7
+++ v8
@@ -23,6 +23,12 @@
 This software is free for you to use in personal and/or commercial projects. If you think that this software helps, please consider a donation to support the developer.

+-----
+
+
+Important Pages:
+[Main Iteration](https://sourceforge.net/p/automouseclicker/wiki/Main%20Iteration/)
+[InBetween Iteration](https://sourceforge.net/p/automouseclicker/wiki/InBetween%20Iteration/)


 [[members limit=20]]

InBetween Iteration modified by Deta Novian Anantika Putra

2021-08-12T10:19:29.954000Z

Main Iteration modified by Deta Novian Anantika Putra

2021-08-12T10:16:50.685000Z

Main Iteration is the primary cycles that need to be run by this software. To run Main Iteration, you need to record mouse coordinates, Delay value, and Repeat value. Though Delay and Repeat is already have default value, you should set it up to your need.

Example case:
You need to run mouse clicking routine with 3 coordinates and need to be run for 20 times. Every click will need approximately 2 seconds delay. So for this, you need to record that 3 coordinates first, then set delay value to 2,000 (please keep in mind that this is in milliseconds), and then set repeat value to 19 (please keep in mind that to run 20 cycles, the repeat value need to be set at 19). Press start and wait for the software to finish.

Chart describing the main iteration process can be seen below.

Home modified by Deta Novian Anantika Putra

2021-08-12T05:01:02.882000Z

Home modified by Deta Novian Anantika Putra

2021-08-12T05:00:44.162000Z

--- v5
+++ v6
@@ -1,11 +1,11 @@
 `This Wiki is under construction. We are working our very best to make this wiki great again :D`

-Welcome to Auto Mouse Clicker Wiki. This page describes quick guide about how to use this software and its general feature.
+# Welcome to Auto Mouse Clicker Wiki. This page describes quick guide about how to use this software and its general feature.

-**Quick guide:**
+# **Quick guide:**
 When application is active or in Foreground, move your cursor/mouse into position then press CTRL to record that position. The position mouse list should be updated with that coordinate. Keep recording until your positions are all recorded then press Start. If something goes wrong, press ESC to cancel iteration.

-**Main Feature:**
+# **Main Feature:**

 1. Configurable delay on mouse clicks
 You can configure the Delay on every click. For example, if you set 1,000 milliseconds (1 second) on delay, that means next click will happen 1 second after current click. Please note that first click will happen immediately after You press Start button. So, 4 coordinates with 1,000 milliseconds delay will takes approximately 4 seconds to complete.

Home modified by Deta Novian Anantika Putra

2021-08-12T04:55:45.797000Z

--- v4
+++ v5
@@ -1,6 +1,6 @@
 `This Wiki is under construction. We are working our very best to make this wiki great again :D`

-Welcome to Auto Mouse Clicker Wiki. This page describes its general feature and quick guide about how to use this software. 
+Welcome to Auto Mouse Clicker Wiki. This page describes quick guide about how to use this software and its general feature.

 **Quick guide:**
 When application is active or in Foreground, move your cursor/mouse into position then press CTRL to record that position. The position mouse list should be updated with that coordinate. Keep recording until your positions are all recorded then press Start. If something goes wrong, press ESC to cancel iteration.

Home modified by Deta Novian Anantika Putra

2021-08-12T04:55:05.507000Z

--- v3
+++ v4
@@ -6,20 +6,22 @@
 When application is active or in Foreground, move your cursor/mouse into position then press CTRL to record that position. The position mouse list should be updated with that coordinate. Keep recording until your positions are all recorded then press Start. If something goes wrong, press ESC to cancel iteration.

 **Main Feature:**
-1. Configurable delay on mouse clicks
+
+1. Configurable delay on mouse clicks
 You can configure the Delay on every click. For example, if you set 1,000 milliseconds (1 second) on delay, that means next click will happen 1 second after current click. Please note that first click will happen immediately after You press Start button. So, 4 coordinates with 1,000 milliseconds delay will takes approximately 4 seconds to complete.

-2. Repeatable mouse iteration cycle
+2. Repeatable mouse iteration cycle
 Mostly, our routine clicking task require more than one cycle to complete. This software handle that needs with ease. You can set the Repeat value to how many cycles you want. For example, you already recorded 5 coordinates and you need to run that iteration 10 times. In that case, You can set Repeat value to 9 then press Start and wait for it to finish 10 iterations.

-3. InBetween iteration feature
+3. InBetween iteration feature
 Sometimes, we need to run another iteration every set of cycles and then back to main iteration again. Let’s say you need to click 3 coordinates on a website in 20 cycles, but every 5 cycles you need to click refresh button. Worry not, this feature already took care of that. After you record 3 coordinates, you can set Repeat value to 19, and then in InBetween Iteration configuration, set Execute Every to 5 cycles. Don’t forget to check Use InBetween checkbox to use this feature.

-4. Save and Load mouse coordinates
+4. Save and Load mouse coordinates
 We are tired of recording mouse coordinates every time we want to use this software. And we believe you are too! So we made this feature available so you don’t have to feel the hassle. You can save the coordinates into simple .txt file and loaded it again later. You can even edit the save file yourself! Just open it with notepad or other text editor, save it, and load it again into the software.

-5. Free to use and no annoying ads
+5. Free to use and no annoying ads
 This software is free for you to use in personal and/or commercial projects. If you think that this software helps, please consider a donation to support the developer.
+

Home modified by Deta Novian Anantika Putra

2021-08-12T04:53:37.209000Z

--- v2
+++ v3
@@ -1,6 +1,27 @@
-Welcome to Auto Mouse Clicker wiki!
+`This Wiki is under construction. We are working our very best to make this wiki great again :D`

-This Wiki is under construction. We are working our very best to make this wiki great again :D
+Welcome to Auto Mouse Clicker Wiki. This page describes its general feature and quick guide about how to use this software. 
+
+**Quick guide:**
+When application is active or in Foreground, move your cursor/mouse into position then press CTRL to record that position. The position mouse list should be updated with that coordinate. Keep recording until your positions are all recorded then press Start. If something goes wrong, press ESC to cancel iteration.
+
+**Main Feature:**
+1. Configurable delay on mouse clicks
+You can configure the Delay on every click. For example, if you set 1,000 milliseconds (1 second) on delay, that means next click will happen 1 second after current click. Please note that first click will happen immediately after You press Start button. So, 4 coordinates with 1,000 milliseconds delay will takes approximately 4 seconds to complete.
+
+2. Repeatable mouse iteration cycle
+Mostly, our routine clicking task require more than one cycle to complete. This software handle that needs with ease. You can set the Repeat value to how many cycles you want. For example, you already recorded 5 coordinates and you need to run that iteration 10 times. In that case, You can set Repeat value to 9 then press Start and wait for it to finish 10 iterations.
+
+3. InBetween iteration feature
+Sometimes, we need to run another iteration every set of cycles and then back to main iteration again. Let’s say you need to click 3 coordinates on a website in 20 cycles, but every 5 cycles you need to click refresh button. Worry not, this feature already took care of that. After you record 3 coordinates, you can set Repeat value to 19, and then in InBetween Iteration configuration, set Execute Every to 5 cycles. Don’t forget to check Use InBetween checkbox to use this feature.
+
+4. Save and Load mouse coordinates
+We are tired of recording mouse coordinates every time we want to use this software. And we believe you are too! So we made this feature available so you don’t have to feel the hassle. You can save the coordinates into simple .txt file and loaded it again later. You can even edit the save file yourself! Just open it with notepad or other text editor, save it, and load it again into the software.
+
+5. Free to use and no annoying ads
+This software is free for you to use in personal and/or commercial projects. If you think that this software helps, please consider a donation to support the developer.
+
+

 [[members limit=20]]
 [[download_button]]

Home modified by Deta Novian Anantika Putra

2021-08-12T03:31:42.691000Z

--- v1
+++ v2
@@ -1,8 +1,6 @@
-Welcome to your wiki!
+Welcome to Auto Mouse Clicker wiki!

-This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].
-
-The wiki uses [Markdown](/p/automouseclicker/wiki/markdown_syntax/) syntax.
+This Wiki is under construction. We are working our very best to make this wiki great again :D

 [[members limit=20]]
 [[download_button]]

Home modified by Deta Novian Anantika Putra

2021-08-11T02:43:52.220000Z

Welcome to your wiki!

This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].

The wiki uses Markdown syntax.

Project Members:

Deta Novian Anantika Putra (admin)