https://sourceforge.net/p/chiefbozssimscr/wiki/2012-02-03T19:14:58.671000ZRecent changes to wiki2012-02-03T19:14:58.671000Z2012-02-03T19:14:58.671000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.netf7e274169142135010c89c488b1c26d38a4ec31b

# CElev # CElev allows you to quickly create the cab for an elevator. It does not create doors or panels, and does not allow for one wall glass elevators. ## First Included ## cElev was first included in release 2 of the script. # Syntax # CElev(fullWidthX, fullWidthZ, internalTexture, externalTexture, cabHeight, doorHeight, doorDirection, panelTexture, floorTexture, ceilingTexture) ***NOTE: This must be called inside an elevator section!*** # Detailed Description # **fullWidthX, fullWidthZ:** The FULL WIDTH of the elevator in the respective axis. Must be positive **internalTexture, externalTexture:** The texture to use on the three non-door walls on the inside and all faces on the outside. **cabHeight, doorHeight:** The height of the cab and door space. If the cab height is greater than the door height a spacer panel will be created above the doors **doorDirection:** The side of the elevator to create the doors on. Front creates the doors on positive Z, back on negative Z, left on negative X, right on positive X. **panelTexture, floorTexture, ceilingTexture:** The texture name for the panels (walls on the door side), floor and ceiling, respectively # Special Note # This function only works when called inside an Elevator function!

2012-02-03T19:04:09.963000Z2012-02-03T19:04:09.963000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.net1c4ea7d8aafeaae62d9b8a16a6f3da43615cab0f

<pre>--- v3 +++ v4 @@ -3,4 +3,4 @@ Chiefboz Scripts is a single text file that allows you to accomplish many tasks in [Skyscraper](http://sourceforge.net/projects/skyscraper) quickly. It is perfect for users who are new to hand-coding buildings. Click a function name to see its syntax and documentation. -[cShaft](CShaft) [cElev](CElev) +[CShaft](cShaft) [CElev](cElev) </pre>

2012-02-03T19:03:40.519000Z2012-02-03T19:03:40.519000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.net7b4f86b5177deb811e35a5743fb1379317280248

<pre>--- v2 +++ v3 @@ -2,5 +2,5 @@ Chiefboz Scripts is a single text file that allows you to accomplish many tasks in [Skyscraper](http://sourceforge.net/projects/skyscraper) quickly. It is perfect for users who are new to hand-coding buildings. -Click a function name to see its syntax. -[cShaft] +Click a function name to see its syntax and documentation. +[cShaft](CShaft) [cElev](CElev) </pre>

2012-02-03T18:30:45.048000Z2012-02-03T18:30:45.048000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.net790387441b89ee1493b551d2b395d4dc6cdc3587

<pre>--- v1 +++ v2 @@ -1,13 +1,13 @@ -# cShaft # - -cShaft allows you to quickly create rectangular shafts for elevators. It will create the whole shaft for you and draw internal and external walls. - +# CShaft # + +CShaft allows you to quickly create rectangular shafts for elevators. It will create the whole shaft for you and draw internal and external walls. + ## First Included ## cShaft was first included in release 1 of the script. # Syntax # - cShaft(shaftNumber, lowFloor, highFloor, centerX, centerZ, fullWidthX, fullWidthZ, internalTexture, externalTexture, thickness) + CShaft(shaftNumber, lowFloor, highFloor, centerX, centerZ, fullWidthX, fullWidthZ, internalTexture, externalTexture, thickness) # Detailed Description # </pre>

2012-02-03T06:05:46.935000Z2012-02-03T06:05:46.935000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.net76ee8d6c51245c58035fb6247e15d0aa9333889f

# cShaft # cShaft allows you to quickly create rectangular shafts for elevators. It will create the whole shaft for you and draw internal and external walls. ## First Included ## cShaft was first included in release 1 of the script. # Syntax # cShaft(shaftNumber, lowFloor, highFloor, centerX, centerZ, fullWidthX, fullWidthZ, internalTexture, externalTexture, thickness) # Detailed Description # **shaftNumber:** The number of the shaft to create. **lowFloor, highFloor:** The lowest and highest floors of the shaft. **centerX, centerZ:** The center position of the shaft in the corresponding dimension. **fullWidthX, fullWidthZ:** The FULL WIDTH of the shaft. This must be positive. **internalTexture, externalTexture:** The texture name for the inner / outer walls. **thickness:** The thickness of all walls in feet. The floor and top will always be 0.5 feet thick. This must be positive.

2012-02-03T05:56:25.667000Z2012-02-03T05:56:25.667000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.net3535425a0f6afeeab08ee769e400f27fdd62646f

<pre>--- v1 +++ v2 @@ -1,8 +1,6 @@ -Welcome to your wiki! - -This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage]. - -The wiki uses [Markdown](/p/chiefbozssimscr/wiki/markdown_syntax/) syntax. - -[[project_admins]] -[[download_button]] +*Welcome to the Chiefboz Scripts wiki* + +Chiefboz Scripts is a single text file that allows you to accomplish many tasks in [Skyscraper](http://sourceforge.net/projects/skyscraper) quickly. It is perfect for users who are new to hand-coding buildings. + +Click a function name to see its syntax. +[cShaft] </pre>

2012-02-03T05:47:14.879000Z2012-02-03T05:47:14.879000ZTatehttps://sourceforge.net/u/chiefboz/https://sourceforge.netaeb76ec29a224a3572995d1584f00e9b02483a84

Welcome to your wiki! This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage]. The wiki uses [Markdown](/p/chiefbozssimscr/wiki/markdown_syntax/) syntax. [[project_admins]] [[download_button]]