Recent changes to bugs

No reaction on Button press with Textbox

2017-08-07T13:34:04.430000Z

Hi, i am using JSTx 0.23 on my Raspberry with an Philips TV 40PFL9704H. Everything works fine i can put Pictures and Messages on the screen. But there is on problem if i use the D1 Option for Dialog i can remove every picture with on buttonclick directly, but if i display a text nothing happens if i clock the but. What is wrong there? If i open Debug i can see that it takes a longer time to see a buttonclick in the console?

Thanks a lot.

kami

#2 Use in domoticz

2016-02-17T17:36:01.445000Z

Hi Felix,

ok, obviously I could ask to go back to the previous release and output the same information, but let's try this:

Did you try recompiling the JSTx binary under the current RPI release (in case of a dependency issue) ?
the -T 30 means it waits 30 seconds, did you try removing that or making it smaller to e.g. 5 (s) ?
did you try pressing OK on the remote on the TV and seeing what happens then ?
try "-D 2" iso "-T 30" (and using e.g. OK to exit)

Let me know, it seems that it simply waits 30 seconds.

Tx,

Sander

#2 Use in domoticz

2016-02-16T20:05:35.543000Z

dmesg
[ 0.000000] Linux version 4.1.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1

jstx-0.24

command:
/home/pi/JSTx/JSTx -F /home/pi/JSTx/font/decker.ttf -s 40 -W 1280 -H 720 -w 1200 -h 60 -x 100 -y 120 -t " $*" -T 30 -b "100,100,100,128" -f "255,255,255,255" -i image:alert.png -i image:/home/pi/domoticz/scripts/alert.png --dfb:quiet --remote=192.168.178.36

Text and image is displayed on the television but the script doesn't end. If I use Ctrl-C I get:
^C(!) [13901: 0.000] --> Caught signal 2
(sent by the kernel) <--

Is this enough info or do you need any log files?

#2 Use in domoticz

2016-02-16T05:14:55.946000Z

Hi Lex,

I would require a bit more information:
system you are running on (kernel + rpi 1/2 etc + base domoticz image url)
command you run (jstx - .....)
* any (debug) output

Thanks,

Sander

Use in domoticz

2016-02-15T21:59:19.781000Z

I am using JSTx with Domoticz (using these instructions https://www.domoticz.com/forum/viewtopic.php?f=4&t=2423). In a prior installation it worked seemlessly. After doing a fresh install I am getting: 2016-02-15 22:55:20.778 Error: EventSystem: Warning!, lua script /home/pi/domoticz/scripts/lua/script_device_Eetkamer.lua has been running for more than 10 seconds

If I run the script directly the command seems to hang.

Can you help?

Cheers,
Lex

Occasional long delay with -D 2

2012-06-08T11:41:42Z

There is an occasional long delay (up to several seconds) between the key press and the time it appears.

The first keypress after start is always immediate.
The following 4-5 keypresses are also instant, but afterwards, the keypresses come with a different amount of delay - some are quick, some take up to several seconds.

I'm running JSTx-0.23 on a 2011 TV, and also tried the updated DirectFB_Vodoo (DirectFB141_source_1.3.1beta3.7z), but see the same behaviour.

Any ideas how to reduce these delays?