Recent changes to Project JSTx

No reaction on Button press with Textbox

2017-08-07T13:34:04.430000Z

Hi, i am using JSTx 0.23 on my Raspberry with an Philips TV 40PFL9704H. Everything works fine i can put Pictures and Messages on the screen. But there is on problem if i use the D1 Option for Dialog i can remove every picture with on buttonclick directly, but if i display a text nothing happens if i clock the but. What is wrong there? If i open Debug i can see that it takes a longer time to see a buttonclick in the console?

Thanks a lot.

kami

#2 Use in domoticz

2016-02-17T17:36:01.445000Z

Hi Felix,

ok, obviously I could ask to go back to the previous release and output the same information, but let's try this:

Did you try recompiling the JSTx binary under the current RPI release (in case of a dependency issue) ?
the -T 30 means it waits 30 seconds, did you try removing that or making it smaller to e.g. 5 (s) ?
did you try pressing OK on the remote on the TV and seeing what happens then ?
try "-D 2" iso "-T 30" (and using e.g. OK to exit)

Let me know, it seems that it simply waits 30 seconds.

Tx,

Sander

#2 Use in domoticz

2016-02-16T20:05:35.543000Z

dmesg
[ 0.000000] Linux version 4.1.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1

jstx-0.24

command:
/home/pi/JSTx/JSTx -F /home/pi/JSTx/font/decker.ttf -s 40 -W 1280 -H 720 -w 1200 -h 60 -x 100 -y 120 -t " $*" -T 30 -b "100,100,100,128" -f "255,255,255,255" -i image:alert.png -i image:/home/pi/domoticz/scripts/alert.png --dfb:quiet --remote=192.168.178.36

Text and image is displayed on the television but the script doesn't end. If I use Ctrl-C I get:
^C(!) [13901: 0.000] --> Caught signal 2
(sent by the kernel) <--

Is this enough info or do you need any log files?

#2 Use in domoticz

2016-02-16T05:14:55.946000Z

Hi Lex,

I would require a bit more information:
system you are running on (kernel + rpi 1/2 etc + base domoticz image url)
command you run (jstx - .....)
* any (debug) output

Thanks,

Sander

Use in domoticz

2016-02-15T21:59:19.781000Z

I am using JSTx with Domoticz (using these instructions https://www.domoticz.com/forum/viewtopic.php?f=4&t=2423). In a prior installation it worked seemlessly. After doing a fresh install I am getting: 2016-02-15 22:55:20.778 Error: EventSystem: Warning!, lua script /home/pi/domoticz/scripts/lua/script_device_Eetkamer.lua has been running for more than 10 seconds

If I run the script directly the command seems to hang.

Can you help?

Cheers,
Lex

Added 2013 version of JSTx-0.24

2015-04-12T11:33:43.340000Z

For 2013 televisions (ie 6008) and perhaps also some 2014 (untested, non-Android X009) the DirectFB functionality was changed which lead to text not being displayed anymore. This release slightly changes this and makes limited text possible for 2013 TV's, and possibly helps with some non-Android 2014 TV's. Note that the memory available for DirectFB is very small in these sets, so you will not be able to push (large) PNG files. Simple text with a small font (e.g. decker.ttf) should work.

Raspberry Pi for 2009 and 2010 models added

2015-03-06T09:49:09.919000Z

On request, a compiled version of JSTx-0.23 for older models Philips TV 2009 and 2010 (Jointspace SDK 1.2) was added.

Home modified by Sander Raaijmakers

2014-05-29T01:05:59.981000Z

--- v2
+++ v3
@@ -9,7 +9,7 @@

 Welcome to the JSTx project !  
 JSTx is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol. JSTx runs on Linux PC's, Raspberry Pi's and Nokia N900 mobile phones.  
-[[img src=JSTxPNG.jpg]]     [[img src=JSTX_overview.png]]  
+[[img src=https://sourceforge.net/p/jstx/wiki/Home/attachment/JSTxPNG.jpg]]     [[img src=https://sourceforge.net/p/jstx/wiki/Home/attachment/JSTX_overview.png]]  
 (Screenshot of JSTx with a PNG image)

Home modified by Sander Raaijmakers

2014-05-29T01:03:59.563000Z

--- v1
+++ v2
@@ -1,8 +1,69 @@
-Welcome to your wiki!
+[TOC]

-This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].

-The wiki uses [Markdown](/p/jstx/wiki/markdown_syntax/) syntax.
-
+[[project_screenshots]]
 [[project_admins]]
 [[download_button]]
+
+## JSTx
+
+Welcome to the JSTx project !  
+JSTx is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol. JSTx runs on Linux PC's, Raspberry Pi's and Nokia N900 mobile phones.  
+[[img src=JSTxPNG.jpg]]     [[img src=JSTX_overview.png]]  
+(Screenshot of JSTx with a PNG image)  
+
+
+  
+  
+Typical devices that support jointSPACE commands are Philips TV's from 2009 and 2010 (example type numbers of supporting devices 42pfl9664, 32pfl7605 etc.).  
+Refer to http://jointspace.sourceforge.net for details on jointSPACE and supporting devices. jointSPACE is based on DirectFB.  
+In essence, JSTx allows you to control and display graphics on top of your TV video, using a PC and a network connected to the jointSPACE enabled TV.  
+
+
+## What's new
+
+2013-04-03 - **Now with support for the Raspberry-Pi (Wheezy build)**
+
+## Who is using it (project examples)
+
+Using the Raspberry Pi and JSTx to get some sensor information to the TV (German): [more info here](http://www.ip-symcon.de/forum/threads/11705-Philips-Fernseher-in-IPS-einbinden?p=193676#post193676)
+
+Domoticaforum highlighting the use of JSTx (English): [info here](http://www.domoticaforum.eu/viewtopic.php?f=38&t=5219&sid=b924310754d10c1f7a1e5936e9cf1482&start=15|more)
+
+## Download
+
+JSTx is available for Linux systems, the famous [Raspberry Pi](http://www.raspberrypi.org/) and the (somewhat old) Nokia N900 mobile phone: 
+
+  * You can download the latest release of JSTx for the Raspberry Pi [here](http://sourceforge.net/projects/jstx/files/JSTx%20V0.2/JSTx-0.24_rpi.tar.bz2/download). 
+  * You can download the latest release of JSTx for Linux [here](https://sourceforge.net/projects/jstx/files/JSTx%20V0.2/). 
+  * You can download the latest release of JSTx for the Nokia N900 [here](https://sourceforge.net/projects/jstx/files/JSTx%20N900/). 
+
+There will not be an Android, iPhone or Windows build made available. This software is for advanced usage only. 
+
+## What can I do with JSTx ?
+
+The current feature list of JSTx is as follows: 
+
+  * using a command line tool for Linux, send jointSPACE commands to a jointSPACE capable device (e.g. TV) to: 
+    * display an overlay with text and PNG images on top of your TV video 
+    * change channels, send other remote control commands 
+    * change activity mode of the TV, to go from e.g. TV watching to Net TV 
+    * continue using your TV while the overlay is shown on your TV 
+    * continuously update a text on your TV from a predefined text file, so you could e.g. show RSS feeds or new e-mail 
+    *  ??? your creative solution here ! 
+
+## Donate
+
+Donations for this project are welcome [here](https://sourceforge.net/project/project_donations.php?group_id=510325). 
+
+## Discuss
+
+Discuss on this project on the forum [here](https://sourceforge.net/apps/phpbb/jstx/). 
+
+## Project page
+
+The project page with further details can be found [here](https://sourceforge.net/projects/jstx/). 
+
+## Supported models
+
+The list of supported models is on the original JointSpace site. Typically, model numbers ending on xxx4-xxx6 (e.g. 47pfl7606) work well with JSTx. For other models mileage may vary, and there support may be limited to key input/output only.

Main_Page modified by Sander Raaijmakers

2014-05-29T01:01:47.135000Z

REDIRECT [JSTx]