https://sourceforge.net/p/kuhlerdriver/activity/2020-07-01T17:07:05.874000ZRecent activity for Antec Kuhler 920 Linux Driver/Control2020-07-01T17:07:05.874000Z2020-07-01T17:07:05.874000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/7/?limit=25#4880

Hey, sorry for the late reply. It does indeed look the electronics are fried, 8 years is a pretty good service life for a closed-loop cooler. if lsusb can't find it , it's probably dead. Maybe try another USB port, just to be safe. the 920 can't really be found anywhere, maybe try the 1250? I wrote the driver for that one too :) that one support multiple units btw. A friend of mine runs 2 kuhler-1250s without issue. He experienced a failure of one of his units too, after about 6 years. On Sun, Jun...

2020-06-15T02:46:19.506000Z2020-06-15T02:46:19.506000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/tickets/7/

920 seems to disappear, fans go to high.

2020-04-14T13:10:20.955000Z2020-04-14T13:10:20.955000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/tickets/6/?limit=25#fd26

This works great! Just like the Windows version, without the GUI. Perfect!

2018-04-15T23:29:05.180000Z2018-04-15T23:29:05.180000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/6/?limit=25#9303

great, glad you have found it. What model do you have? I assume the 920? did you try running ./kuhlerd and kuhler_ctl? they should be in that directory where you typed "make". Any error/warning messages? On Sun, Apr 15, 2018 at 4:23 PM, Ticket 6 6@tickets.kuhlerdriver.p.re.sourceforge.net wrote: [tickets:#6] Install/set up trouble Status: open Milestone: 1.0 Created: Sun Apr 15, 2018 08:23 PM UTC by Anonymous Last Updated: Sun Apr 15, 2018 08:23 PM UTC Owner: nobody Hi there, I am stoked to have...

2018-04-15T23:06:28.450000Z2018-04-15T23:06:28.450000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/6/

Install/set up trouble

2018-04-15T23:06:19.498000Z2018-04-15T23:06:19.498000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/6/

Install/set up trouble

2018-04-15T23:05:30.588000Z2018-04-15T23:05:30.588000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/6/?limit=25#5dcd

hey, glad you found it! What model do you have? the 920 I assume? does "kuhlerd" and "kuhler_ctl" exist in the directory where you typed "make" did you run ./kuhlerd, and then try ./kuhler_ctl?

2018-04-15T20:23:23.241000Z2018-04-15T20:23:23.241000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/tickets/6/

Install/set up trouble

2017-11-03T21:44:20.722000Z2017-11-03T21:44:20.722000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

Edited by author [me] 2017 11 03 The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111",...

2017-11-03T21:41:39.031000Z2017-11-03T21:41:39.031000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

Edited by author [me] The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111",...

2017-11-03T21:40:21.427000Z2017-11-03T21:40:21.427000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

Edited by author [me] The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111",...

2017-11-03T21:37:35.552000Z2017-11-03T21:37:35.552000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

Edited by author [me] The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111",...

2017-11-03T21:35:25.405000Z2017-11-03T21:35:25.405000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#3724

deleted by author, original post updated

2017-11-03T21:34:09.810000Z2017-11-03T21:34:09.810000Zkaywan joseph mansubihttps://sourceforge.net/u/krunch3r/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

Edited by author [me] The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111",...

2017-10-17T22:52:15.573000Z2017-10-17T22:52:15.573000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#3724

One important modification that occurred to me after sharing this is to change the user running the process from root to another user. I do not know of an elegant way to accomplish this at the moment but I would be remiss as a netizen concerned for the security of my neighbors if I didn't in the least point it out. And it seems better practice to do it any way: add a user e.g. kuhler and add to kuhler group to the service unit files as follows: Under [Service] user=kuhler group=kuhler .... And finally,...

2017-10-17T22:52:15.857000Z2017-10-17T22:52:15.857000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/d2a2c3ed/?limit=25#9f3f

The included 10-kuhler.rules udev rule to run on BOOTUP does not work with systemd setups and requires syntactical and control flow changes. Specifically, RUN+=/var/local/kuhlerd looks like an older syntax so cannot be parsed well. RUN{program}=/var/local/kuhlerd is the correct syntax as of late but it will not execute as expected. My workaround, which I share to enlighten other fans: /etc/udev/rules.d/10-kuhler.rules SUBSYSTEM=="usb", ATTR{idVendor}=="2433", ATTR{idProduct}=="b111", SYMLINK="kuhler",...

2017-04-19T23:35:10.601000Z2017-04-19T23:35:10.601000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/f7b82362/?limit=25#879b/c203

thanks for compatibility report. I will add to supported list!

2017-04-19T23:34:48.379000Z2017-04-19T23:34:48.379000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/f7b82362/?limit=25#879b

For the record, this driver appears to work with the Corsair H100i V2 simply by changing the V4 VID to 0x1b1c and the V4 PID to 0x0c09

2017-04-19T23:34:32.584000Z2017-04-19T23:34:32.584000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/b15f42a4/?limit=25#bc28

you can ignore the bulk of that. The only error is that the rt library cannot be found. Not convinced you actually need it. In the Makefile remove the -lrt switch and try again.

2017-04-19T23:34:26.922000Z2017-04-19T23:34:26.922000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/b15f42a4/?limit=25#c82f

thanks for letting me know. I don't have a MAC or clone to try this on. Let me know if I can help!

2017-03-13T10:32:40.078000Z2017-03-13T10:32:40.078000ZNuddikhttps://sourceforge.net/u/nuddik/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/daead26f/?limit=25#da33

Hi, I'm trying to make the file on a Hackintosh running MacOS 10.12.3 and I'm having...

2017-03-13T10:08:26.739000Z2017-03-13T10:08:26.739000ZNuddikhttps://sourceforge.net/u/nuddik/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/b15f42a4/?limit=25#98de

I'm trying to make the file on a Hackintosh running MacOS 10.12.3 and I'm having...

2016-01-07T19:47:53.693000Z2016-01-07T19:47:53.693000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#b7ea/3d27

great! have skype?, can always direct-message me.

2016-01-07T02:43:21.030000Z2016-01-07T02:43:21.030000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#fc92/4f5e

Thanks for the info. email addr or skype so I can contact? We will need to setup...

2016-01-07T02:39:33.648000Z2016-01-07T02:39:33.648000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#fc92

Some more info under windows 1st device - Antec Kuhler h2o 1250 Device Descriptor:...

2016-01-06T16:28:23.916000Z2016-01-06T16:28:23.916000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#b7ea/3d27

great! have skype?, can always direct-message me, alphageek@hotmail.com.

2016-01-06T16:27:08.466000Z2016-01-06T16:27:08.466000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#b7ea

Yes, I can. All of the above is available

2016-01-05T19:05:33.433000Z2016-01-05T19:05:33.433000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#5d63/350b

do you have linux installed? if you do lsusb and send me the output, I can get an...

2016-01-05T19:04:06.675000Z2016-01-05T19:04:06.675000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#5d63

Ikno know. Talked with him via email, kuhler h2o 1250s not even recognized yet. How...

2015-12-09T13:52:06.505000Z2015-12-09T13:52:06.505000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#8f2a/9ffe

nice rig! the linux driver will work, but for now, it will only control ONE of the...

2015-12-09T13:49:10.640000Z2015-12-09T13:49:10.640000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/16ba1605/?limit=25#8f2a

Hi Just built a new pc / office heater... Dual Xeon E5-2690 Rig. I saw a mention...

2015-08-06T02:11:38.791000Z2015-08-06T02:11:38.791000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/f7b82362/?limit=25#f6f9/39cc

Hi! The driver is pertty generic, it's a source-only package so it should work with...

2015-08-06T01:54:27.019000Z2015-08-06T01:54:27.019000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/5/?limit=25#e5d1

Hi! The driver is pertty generic, it's a source-only package so it should work with...

2015-08-06T01:50:44.690000Z2015-08-06T01:50:44.690000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/f7b82362/?limit=25#8933

Hi There, I am currently running a Antec 920 with windows 8.1 and am wanting to switch...

2015-08-06T01:50:44.039000Z2015-08-06T01:50:44.039000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/discussion/general/thread/97e1b940/?limit=25#9afc

So from your description driver polls hw at fixed time interval (seconds, milliseconds)...

2015-08-06T01:49:27.114000Z2015-08-06T01:49:27.114000ZBryce Yarbroughhttps://sourceforge.net/u/brysicle88/profile/https://sourceforge.net/p/kuhlerdriver/tickets/5/

Kuhler 920 on Fedora 22

2015-08-06T01:37:34.911000Z2015-08-06T01:37:34.911000ZBryce Yarbroughhttps://sourceforge.net/u/brysicle88/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/f7b82362/?limit=25#f6f9

Post above is mine, forgot to login.

2015-05-28T00:18:45.271000Z2015-05-28T00:18:45.271000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/97e1b940/?limit=25#f57a

you could call it a hardware issue, since the hardware doesn't do any filtering,...

2014-11-17T01:05:28.445000Z2014-11-17T01:05:28.445000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/?limit=25#bfc2

I can read the code with "sudo kill -1 PID": Nov 17 02:00:16 DRAGON kuhlerd[17638]:...

2014-11-16T20:33:04.778000Z2014-11-16T20:33:04.778000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/?limit=25#6170

Hi! About the RPM, yep, they should be around 1500 with 35deg/c (at least, it is...

2014-11-16T17:44:16.654000Z2014-11-16T17:44:16.654000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/?limit=25#015b/6e05

Interesting, looks like the thresholds are not being read. Try killing the process,...

2014-11-16T17:00:51.577000Z2014-11-16T17:00:51.577000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/?limit=25#015b

Hi AlphaGeek, Thank you for your reply!. I've been testing the commands that you...

2014-11-16T15:37:22.707000Z2014-11-16T15:37:22.707000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/?limit=25#5bbd/7034

Hey, thanks for filing the ticket and providing the debug info. First of all, I only...

2014-11-16T10:28:40.267000Z2014-11-16T10:28:40.267000ZAnonymoushttps://sourceforge.net/p/kuhlerdriver/tickets/4/

V4 Thresholds not working

2014-11-16T10:08:01.685000Z2014-11-16T10:08:01.685000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/

V4 Thresholds not working

2014-11-16T10:02:07.446000Z2014-11-16T10:02:07.446000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/

V4 Thresholds not working

2014-11-16T10:01:35.257000Z2014-11-16T10:01:35.257000ZCristianhttps://sourceforge.net/u/cristiangauma/profile/https://sourceforge.net/p/kuhlerdriver/tickets/4/

V4 Thresholds not working

2014-03-30T01:14:21.927000Z2014-03-30T01:14:21.927000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/6ae4fc47/?limit=25#372e/a84c/7eea/cc6e/ddb2

Thanks for the reports! Sorry for not responding. I figured it might be a current...

2014-03-14T15:55:45.219000Z2014-03-14T15:55:45.219000ZAlphaGeekhttps://sourceforge.net/u/anon31337/profile/https://sourceforge.net/p/kuhlerdriver/discussion/general/thread/6ae4fc47/?limit=25#372e/a84c/7eea

Can you please include the Operating system used, type of cooler [the usb ID, by...