<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom"><channel><title>Recent changes to support-requests</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/</link><description>Recent changes to support-requests</description><atom:link href="https://sourceforge.net/p/pcmcia-cs/support-requests/feed.rss" rel="self"/><language>en</language><lastBuildDate>Mon, 10 Oct 2005 04:21:55 -0000</lastBuildDate><atom:link href="https://sourceforge.net/p/pcmcia-cs/support-requests/feed.rss" rel="self" type="application/rss+xml"/><item><title>FC4 Install Troubles...</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/175/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;I am new to linux and trying to get a WPC11 V4 card to &lt;br /&gt;
work under FC4. After trying several things with some &lt;br /&gt;
realtek drivers (I read on several forums that this is the &lt;br /&gt;
chipset the V4 card uses), I have not gotten anywhere &lt;br /&gt;
and then I discovered the linux-pcmcia_cs project. I saw &lt;br /&gt;
that you supported my card and I attempted a download &lt;br /&gt;
and install. However when I run "make all" it gives me &lt;br /&gt;
several errors (pages of them) when it goes to compile &lt;br /&gt;
the files. I am pretty sure I have the complete source &lt;br /&gt;
tree installed for the kernel and that I am pointing it to &lt;br /&gt;
the right place (/usr/src/kernels/[kernelversion]-686i) or &lt;br /&gt;
something like that (not at this particular machine at the &lt;br /&gt;
moment.) Any help you can provide to help me get this &lt;br /&gt;
package installed would be wonderful. The card works &lt;br /&gt;
fine under windows. The default PCMCIA package that &lt;br /&gt;
comes with FC4 does not recognize the card. When I &lt;br /&gt;
use "cardctl info" it will not report anything, but when I &lt;br /&gt;
use "cardctl status" it reports a 3.3v cardbus card in the &lt;br /&gt;
socket and nothing else. I hope this info helps. Let me &lt;br /&gt;
know if you need more. I am attempting to install the &lt;br /&gt;
3.28 version of the package.&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Michael McCord</dc:creator><pubDate>Mon, 10 Oct 2005 04:21:55 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net89cb09bae8f211f619618fd95ab2d46f9bfb5dcf</guid></item><item><title>AIR-LMC340 in pcmcia slot</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/174/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;Pulled apart my cisco pci 340 card as I wanted to use&lt;br /&gt;
it in my laptop.  Seemed to be a standard pcmcia 340&lt;br /&gt;
card.  Works sweet as in windows.  But under linux all&lt;br /&gt;
I get is a few flashing lights on insert, and then&lt;br /&gt;
nothing.&lt;br /&gt;
&lt;/p&gt;
&lt;p&gt;cardctl just tells me theres no card inserted and the&lt;br /&gt;
/var/log/messages just gives me a "pcmcia: socket time&lt;br /&gt;
out after reset".&lt;br /&gt;
&lt;/p&gt;
&lt;p&gt;So I did a bit of searching around and found that its&lt;br /&gt;
to do with the pcmcia vs isa/pci flag being hardwired&lt;br /&gt;
into the bootblock.  Which I guess means that cardctl&lt;br /&gt;
thinks its a isa/pci card, not a pcmcia card and&lt;br /&gt;
refuses to do anything.&lt;/p&gt;
&lt;p&gt;Can this behaviour be changed?  Or is there a work&lt;br /&gt;
around for it? &lt;/p&gt;
&lt;p&gt;I am runnning fedora core 3, and the link I was talking&lt;br /&gt;
about previous is&lt;br /&gt;
&lt;a href="http://www.mcse.ms/archive123-2004-2-431898.html" rel="nofollow"&gt;http://www.mcse.ms/archive123-2004-2-431898.html&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Thanks in advance fore any help on this.&lt;/p&gt;
&lt;p&gt;Fletch&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Fletch</dc:creator><pubDate>Tue, 04 Jan 2005 20:51:31 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net4f763686e3b4816bfe602f74f75e57d71c6c083f</guid></item><item><title>Memory Addressing 2 PCMCIA Slots with 2.6 Kernel</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/173/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;My Micron Transport VLX has 2 pcmcia slots.  While&lt;br /&gt;
running a 2.4 kernel, both slots work perfectly, but&lt;br /&gt;
under a 2.6 kernel (for wireless support) I can get the&lt;br /&gt;
first slot to work, but I've tried numerous memory&lt;br /&gt;
ranges and cannot seem to get the second slot working.&lt;/p&gt;
&lt;p&gt;# uname -rmo&lt;br /&gt;
2.6.7-1-386 i586 GNU/Linux&lt;br /&gt;
(Debian)&lt;/p&gt;
&lt;p&gt;# cat /etc/default/pcmcia&lt;br /&gt;
PCMCIA=yes&lt;br /&gt;
PCIC=i82365&lt;br /&gt;
...&lt;/p&gt;
&lt;p&gt;# cat /var/log/syslog&lt;br /&gt;
...&lt;br /&gt;
PCI: No IRQ known for interrupt pin A of device&lt;br /&gt;
00:13.0.  Please try using pci=biosirq&lt;br /&gt;
Cirrus PD6729 rev 00 PCI-to-PCMCIA at slot 00:13, port&lt;br /&gt;
0x3e0&lt;br /&gt;
...&lt;br /&gt;
cardmgr: watching 2 sockets&lt;br /&gt;
cs: IO port probe ... : clean&lt;br /&gt;
cardmgr: starting, version is 3.2.5&lt;br /&gt;
cs: memory probe ... : clean&lt;br /&gt;
...&lt;br /&gt;
Socket 1: Anonymous Memory&lt;br /&gt;
cs: unable to map card memory!&lt;br /&gt;
cardmgr: `modprobe memory_cs`&lt;br /&gt;
...&lt;br /&gt;
cardmgr: + FATAL: Module memory_cs not found&lt;br /&gt;
...&lt;/p&gt;
&lt;p&gt;I tried putting pci=biosirq in /etc/default/pcmcia, but&lt;br /&gt;
it didn't seem to like that.  Does it go elsewhere?&lt;/p&gt;
&lt;p&gt;All ports and memory ranges return clean, but it still&lt;br /&gt;
considers slot 1, "Anonymous Memory" when another card&lt;br /&gt;
is present in slot 0.&lt;/p&gt;
&lt;p&gt;# cardctl ident&lt;br /&gt;
Socket 0:&lt;br /&gt;
product info: "Belkin",&lt;br /&gt;
"11Mbps-Wireless-Notebook-Network-Adapter"&lt;br /&gt;
manfid: 0x01bf, 0x3302&lt;br /&gt;
function: 6 (network)&lt;/p&gt;
&lt;p&gt;Socket 1:&lt;br /&gt;
product info: "3Com Corporation", "3C589D", "TP/BNC LAN&lt;br /&gt;
Card Ver. 2a", "000002"&lt;br /&gt;
manfid: 0x0101, 0x0589&lt;br /&gt;
function: 6 (network)&lt;/p&gt;
&lt;p&gt;I can get either card to work in either slot&lt;br /&gt;
independently, but I have been unable to get both to&lt;br /&gt;
work simultaneously (in either order).&lt;/p&gt;
&lt;p&gt;I managed to excise the excluded ports until they all&lt;br /&gt;
returned clean, but am still having problems with the&lt;br /&gt;
memory addressing.&lt;/p&gt;
&lt;p&gt;# cat /proc/iomem&lt;/p&gt;
&lt;p&gt;00000000-0009fbff : System RAM&lt;br /&gt;
0009fc00-009fff : reserved&lt;br /&gt;
000a0000-000bffff : Video RAM area&lt;br /&gt;
000c0000-000c9fff : Video ROM&lt;br /&gt;
000cc000-000ccfff: card services&lt;br /&gt;
000f0000-000fffff : System ROM&lt;br /&gt;
00100000-27fffff : System RAM&lt;/p&gt;
&lt;p&gt;00100000-002477be : Kernel code&lt;br /&gt;
002477bf-002f6dff : Kernel data&lt;/p&gt;
&lt;p&gt;fe800000-febfffff : 0000:00:14.0&lt;br /&gt;
ffff89a1-ffffffff : reserved&lt;/p&gt;
&lt;p&gt;Which has the following gaps:&lt;/p&gt;
&lt;p&gt;000ca000-000cbfff&lt;br /&gt;
000cd000-000effff&lt;/p&gt;
&lt;p&gt;002f6e00-002477be&lt;/p&gt;
&lt;p&gt;002800000-fe7fffff&lt;/p&gt;
&lt;p&gt;I've managed to excise the exlcuded regions, yeilding:&lt;/p&gt;
&lt;p&gt;0xcc000-0xdefff&lt;/p&gt;
&lt;p&gt;The other ranges aren't mentioned in neither dmesg nor&lt;br /&gt;
the syslog.  No matter how I subdivide the range,&lt;br /&gt;
pcmcia-cs will only recognize one socket, claiming the&lt;br /&gt;
other "Anonymous Memory."  I tried splitting the range&lt;br /&gt;
in half, but then it returned odd exclusions --&lt;br /&gt;
including the entire second half and continued through&lt;br /&gt;
(the un-included) 0xe07ff.  Another thought is that&lt;br /&gt;
this range may be insufficient for two cards --&lt;br /&gt;
although the same range works fine for both sockets in&lt;br /&gt;
a 2.4 kernel.&lt;/p&gt;
&lt;p&gt;I've read the howto, googled, irc'd, and emailed -- but&lt;br /&gt;
I still can't figure this out.  Any help would be&lt;br /&gt;
appreciated.&lt;/p&gt;
&lt;p&gt;TIA&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">George</dc:creator><pubDate>Sun, 08 Aug 2004 01:50:31 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net3e08812bdc73f9f288f8fd0cdc81bbe812b04bc6</guid></item><item><title>ACER Aspire laptop hangs when launching pcmcia</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/172/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;I am installing Linux Mandrake 10.0 on an Acer laptop&lt;br /&gt;
Aspire 1350 (specifically 1356LMi). &lt;br /&gt;
I would like to use a Wi-Fi Cardbus Card from SMC (2835W).&lt;br /&gt;
The system freezes when trying to enable pcmcia support&lt;br /&gt;
(either at boot or in-session). The only way out is a&lt;br /&gt;
brutal reset.&lt;br /&gt;
This occurs whether a PC Card is in or not.&lt;br /&gt;
Actually it is enough to load yenta_socket to produce&lt;br /&gt;
the freeze.&lt;br /&gt;
There is nothing in syslog (perhaps because of the hard&lt;br /&gt;
reset ?).&lt;br /&gt;
I have tried with ACPI on/off and APIC on/off in all&lt;br /&gt;
combinations of both. No result.&lt;br /&gt;
I have tried in  /etc/sysconfig/pcmcia to set&lt;br /&gt;
PCIC_OPTS="do_scan=0" and some "irq_list=..." (only a&lt;br /&gt;
few combinations, I must admit).No success.&lt;br /&gt;
I have also tried to exclude specific IRQs through &lt;br /&gt;
/etc/pcmcia/config.opts (those which were not listed as&lt;br /&gt;
already attributed in /proc/interrupts). No result.&lt;/p&gt;
&lt;p&gt;[ Note : there is another problem, I don't know if it&lt;br /&gt;
is related or not ; USB 2 devices are not recognised&lt;br /&gt;
when ACPI is on, but are recognised when ACPI is off.&lt;br /&gt;
By not recognised, I mean there is no initial dialog&lt;br /&gt;
and nothing appears in  /proc/scsi/scsi.In contrast,&lt;br /&gt;
USB 1.1 devices are recognised and automatically&lt;br /&gt;
mounted without difficulty whether ACPI is on or off.]&lt;/p&gt;
&lt;p&gt;The kernel is 2.6.3-13mdk&lt;br /&gt;
The BIOS is PHENIX ZP1 Q3A24&lt;br /&gt;
The pcmcia driver is 3.2.5&lt;br /&gt;
The CardBus Controller is Texas Instruments PCI-1410&lt;br /&gt;
(it is correctly recognised by HardDrake which also&lt;br /&gt;
affects it &lt;br /&gt;
the yenta_socket driver).&lt;br /&gt;
The output of lspci concerning this device is as follows :&lt;br /&gt;
00:07.0 CardBus bridge: Texas Instruments PCI1410 PC&lt;br /&gt;
card Cardbus Controller (rev 02)&lt;br /&gt;
Subsystem: Acer Incorporated [ALI]: Unknown device 0033&lt;br /&gt;
Flags: bus master, medium devsel, latency 0, IRQ 5&lt;br /&gt;
Memory at 20000000 (32-bit, non-prefetchable) [size=4K]&lt;br /&gt;
Bus: primary=00, secondary=02, subordinate=05,&lt;br /&gt;
sec-latency=176&lt;br /&gt;
I/O window 0: 00000000-00000003&lt;br /&gt;
I/O window 1: 00000000-00000003&lt;br /&gt;
16-bit legacy interface ports at 0001&lt;/p&gt;
&lt;p&gt;Can somebody suggest a solution ?&lt;/p&gt;
&lt;p&gt;Claude&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">claude</dc:creator><pubDate>Thu, 15 Jul 2004 12:37:26 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net75a494f67832b4051813a0934ffab3d00c48afdb</guid></item><item><title>Problems running pcmcia-cs on embedded plattform.</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/171/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;Hi everybody,&lt;/p&gt;
&lt;p&gt;I've got a problem with cardmgr beeing able to recognise Cards (e.g. &lt;br /&gt;
Netgear MA401 - wlan pcmcia) , on an i386 compatible Embedded &lt;br /&gt;
system.&lt;br /&gt;
Brief setup embedded:&lt;br /&gt;
NSC Geode2200 Processor (i386 comapat)&lt;br /&gt;
Kernel 2.4.24 &lt;br /&gt;
pcmcia-cs 3.2.7&lt;br /&gt;
busysbox tools (insmod...)&lt;/p&gt;
&lt;p&gt;Brief setup laptop ( used for 'cross compiling' ):&lt;br /&gt;
Toshiba sattelite 1900&lt;br /&gt;
Dist (SuSE9.0 Kernel 2.4.19)&lt;/p&gt;
&lt;p&gt;Kernel config conatains support for pcmcia an the corresponding &lt;br /&gt;
modules...see attached config file.&lt;br /&gt;
I user the following Configure statement:&lt;/p&gt;
&lt;p&gt;./Configure --noprompt --kernel=/opt/embedded/copilot/kernel/linux-2.4.&lt;br /&gt;
24 --target=/opt/embedded/copilot/rootfs \
--moddir=/opt/embedded/copilot/rootfs/usr/lib --arch=i386 \
--ucc=/opt/embedded/copilot/tools/bin/i386-linux-gcc \
--kcc=/opt/embedded/copilot/tools/bin/i386-linux-gcc \
--ld=/opt/embedded/copilot/tools/bin/i386-linux-ld \
--cardbus --srctree --sysv --rcdir=/etc/init.d&lt;/p&gt;
&lt;p&gt;Configuration/Compilation seems to be ok, no errors or warnings.&lt;br /&gt;
The problem maybe a mismatch in the Card Service release??? &lt;br /&gt;
I've got no problems compiling it the normal way for the laptop agains &lt;br /&gt;
2.4.19 kernel, everything works fine (Card recognition, modules...)&lt;br /&gt;
On the embedded System the commands &lt;br /&gt;
cardctl ident  doesn't show anything if the netgear card is inserted.&lt;br /&gt;
pcic_probe shows up the TI1520 Bridge (on my Laptop TI1410)&lt;br /&gt;
Output in /var/log/messages:&lt;br /&gt;
Jun  1 11:05:07 (none) syslog.info klogd: Linux Kernel Card Services 3.&lt;br /&gt;
1.22&lt;br /&gt;
Jun  1 11:05:07 (none) syslog.info klogd:   options:  [pci] [cardbus] [pm]&lt;br /&gt;
Jun  1 11:05:07 (none) syslog.info klogd: Intel ISA PCIC probe: not &lt;br /&gt;
found.&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.warn klogd: Yenta IRQ list 0288, PCI &lt;br /&gt;
irq10&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.warn klogd: Socket status: 30000006&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.warn klogd: Yenta IRQ list 0288, PCI &lt;br /&gt;
irq10&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.warn klogd: Socket status: 30000006&lt;br /&gt;
Jun  1 11:05:08 (none) daemon.info cardmgr[384]: watching 2 sockets&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x0c00-0x0cff: clean.&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x0820-0x08ff: excluding 0x820-0x827 0x860-0x86f&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x0800-0x080f: clean.&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x03e0-0x04ff: excluding 0x3e8-0x3ff 0x480-0x48f 0x4d0-0x4d7&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x0100-0x03af: excluding 0x100-0x11f 0x158-0x15f 0x2e8-0x2ef &lt;br /&gt;
0x2&lt;br /&gt;
f8-0x2ff 0x338-0x33f 0x378-0x37f&lt;br /&gt;
Jun  1 11:05:08 (none) syslog.info klogd: cs: IO port probe &lt;br /&gt;
0x0a00-0x0aff: clean.&lt;br /&gt;
Jun  1 11:05:31 (none) syslog.info klogd: cs: memory probe &lt;br /&gt;
0xa0000000-0xa0ffffff: clean.&lt;br /&gt;
Jun  1 11:05:31 (none) daemon.info cardmgr[385]: socket 0: &lt;br /&gt;
Anonymous Memory&lt;br /&gt;
Jun  1 11:05:32 (none) syslog.notice klogd: memory_cs: Card Services &lt;br /&gt;
release does not match!&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: executing: &lt;br /&gt;
'modprobe memory_cs 2&amp;gt;&amp;amp;1'&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: + Using &lt;br /&gt;
/lib/modules/2.4.24/pcmcia/memory_cs.o&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: + insmod: &lt;br /&gt;
init_module: memory_cs: Invalid argument&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: + modprobe: failed &lt;br /&gt;
to load module memory_cs&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.notice cardmgr[385]: modprobe exited &lt;br /&gt;
with status 1&lt;br /&gt;
Jun  1 11:05:32 (none) syslog.notice klogd: memory_cs: Card Services &lt;br /&gt;
release does not match!&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: executing: 'insmod &lt;br /&gt;
/lib/modules/2.4.24/pcmcia/memory_cs.o 2&amp;gt;&amp;amp;1'&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: + Using &lt;br /&gt;
/lib/modules/2.4.24/pcmcia/memory_cs.o&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.info cardmgr[385]: + insmod: &lt;br /&gt;
init_module: memory_cs: Invalid argument&lt;br /&gt;
Jun  1 11:05:32 (none) daemon.notice cardmgr[385]: insmod exited &lt;br /&gt;
with status 1&lt;br /&gt;
Jun  1 11:05:33 (none) daemon.err cardmgr[385]: get dev info on &lt;br /&gt;
socket 0 failed: Resource temporarily unavailable&lt;/p&gt;
&lt;p&gt;If anyone has a clue or if some more informations are needed, please let &lt;br /&gt;
me know&lt;/p&gt;
&lt;p&gt;Best regards&lt;br /&gt;
Miko&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">MMiko</dc:creator><pubDate>Tue, 01 Jun 2004 10:19:26 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net03e1523e167e906f90aff0b1b04dfc777c86e7ff</guid></item><item><title>Compile Error on 2.4.25 Powerpc</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/170/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;mactop:~/pcmcia-cs-3.2.7# make all &lt;br /&gt;
make[1]: Entering directory &lt;br /&gt;
`/root/pcmcia-cs-3.2.7/modules' &lt;br /&gt;
cc -fno-builtin -msoft-float -ffixed-r2  -MD -O3 -Wall &lt;br /&gt;
-Wstrict-prototypes -pipe -Wa,--no-warn -I../include &lt;br /&gt;
-I/usr/src/linux/include  -D__KERNEL__ -DMODULE -c cs.c &lt;br /&gt;
In file included from ../include/asm/io.h:5, &lt;br /&gt;
from /usr/src/linux/include/asm/dma.h:12, &lt;br /&gt;
from /usr/src/linux/include/asm/scatterlist.h:5, &lt;br /&gt;
from /usr/src/linux/include/asm/pci.h:8, &lt;br /&gt;
from /usr/src/linux/include/linux/pci.h:679, &lt;br /&gt;
from ../include/linux/pci.h:4, &lt;br /&gt;
from cs.c:49: &lt;br /&gt;
/usr/src/linux/include/asm/io.h: In function `virt_to_bus': &lt;br /&gt;
/usr/src/linux/include/asm/io.h:235: &lt;br /&gt;
`CONFIG_KERNEL_START' undeclared (first use in this &lt;br /&gt;
function) &lt;br /&gt;
/usr/src/linux/include/asm/io.h:235: (Each undeclared &lt;br /&gt;
identifier is reported only once &lt;br /&gt;
/usr/src/linux/include/asm/io.h:235: for each function it &lt;br /&gt;
appears in.) &lt;br /&gt;
/usr/src/linux/include/asm/io.h: In function `bus_to_virt': &lt;br /&gt;
/usr/src/linux/include/asm/io.h:246: &lt;br /&gt;
`CONFIG_KERNEL_START' undeclared (first use in this &lt;br /&gt;
function) &lt;br /&gt;
/usr/src/linux/include/asm/io.h: In function &lt;br /&gt;
`virt_to_phys': &lt;br /&gt;
/usr/src/linux/include/asm/io.h:259: &lt;br /&gt;
`CONFIG_KERNEL_START' undeclared (first use in this &lt;br /&gt;
function) &lt;br /&gt;
/usr/src/linux/include/asm/io.h: In function &lt;br /&gt;
`phys_to_virt': &lt;br /&gt;
/usr/src/linux/include/asm/io.h:268: &lt;br /&gt;
`CONFIG_KERNEL_START' undeclared (first use in this &lt;br /&gt;
function) &lt;br /&gt;
make[1]: *** [cs.o] Error 1 &lt;br /&gt;
make[1]: Leaving directory &lt;br /&gt;
`/root/pcmcia-cs-3.2.7/modules' &lt;br /&gt;
make: *** [all] Error 2 &lt;/p&gt;
&lt;p&gt;it's a mac powerbook g3 wallstreet, with debian sarge &lt;br /&gt;
ppc.  Custom compiled kernel.  please help!  I get this &lt;br /&gt;
compile error with debian's pcmcia-source package, and &lt;br /&gt;
with the latest tarball from sourceforge.  please help! &lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">james</dc:creator><pubDate>Wed, 19 May 2004 02:40:47 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net39403ae027b396e492eef4bf96e79ed8acdfb1f9</guid></item><item><title>orange la cie fire wire</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/169/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;Hi,&lt;br /&gt;
this is a reply to dahinds message regarding my pcmcia&lt;br /&gt;
firewire orange link combo card and a La Cie 80GB HD.&lt;br /&gt;
I didn't know how to reply in the project 898461&lt;br /&gt;
because the file is closed?&lt;br /&gt;
I did the modprobe sbp2 with no response on the command&lt;br /&gt;
line. However I have attached a file "orange_lacie.txt"&lt;br /&gt;
with interesting discoveries. When booting the system&lt;br /&gt;
SuSE 8.2 it recognized the pcmcia card but in the&lt;br /&gt;
mentioned file it failed to load the ieee 1394 module.&lt;br /&gt;
This is where I am stuck.&lt;/p&gt;
&lt;p&gt;REgarding my Sony CDRW CRX75a I finally go it working.&lt;/p&gt;
&lt;p&gt;Thanks for your help altogether.&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Heinz Hoetger</dc:creator><pubDate>Sun, 07 Mar 2004 03:58:54 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net4397024b9cf06d89fb43a6892867b813bf860114</guid></item><item><title>Sony CD writer CRX75A &amp;amp; LACIE 80GB HD</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/168/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;Hi, &lt;br /&gt;
I have installed SuSe 8.2 kernel vers. 2.4 with pcmcia&lt;br /&gt;
kerneland the whole system updated.&lt;br /&gt;
While booting everything is fine. &lt;/p&gt;
&lt;p&gt;I have 2 parts requesting information or help, please:&lt;/p&gt;
&lt;p&gt;1. my OrangeMIcro Combo PCMCIA card  USB 2 and FireWire&lt;br /&gt;
recognizes usb devices but declines to recognize my&lt;br /&gt;
LaCIE Firewire 80GB HD.&lt;/p&gt;
&lt;p&gt;2. Under supported pcmcia card listing i found &lt;br /&gt;
Sony CD writer CRX75a ( 16 bit only) &lt;br /&gt;
My system does n ot recognize that card.&lt;/p&gt;
&lt;p&gt;For both problems I don't know where to start looking&lt;br /&gt;
since I am a total novice but willing to work and read&lt;br /&gt;
my way through documents etc. &lt;/p&gt;
&lt;p&gt;thanks whoever can give me some help!&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Heinz Hoetger</dc:creator><pubDate>Tue, 17 Feb 2004 03:12:26 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net7bafd4aab4d04ef888d913e4048ef1c8d4866c61</guid></item><item><title>O2 Micro OZ6912 Cardbus Controller (PCMCIA)</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/167/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;Hello,&lt;/p&gt;
&lt;p&gt;I have a Compaq Presario 2175US Laptop, AMD Athlon &lt;br /&gt;
2400 with 500mb RAM. &lt;/p&gt;
&lt;p&gt;I have tried multiple installations of different Linux &lt;br /&gt;
brands (SUSE, RH9, Mandrake9.2, Knoppix 3.2, and &lt;br /&gt;
Knoppix-STD) -- all of which will totally lock-up when I &lt;br /&gt;
have a device inserted into the PCMCIA card-slot. I &lt;br /&gt;
have even tried to insert the card after bootup with &lt;br /&gt;
cardctl insert. When I do that, it also locks up my &lt;br /&gt;
laptop. What can I do to get around this problem? Any &lt;br /&gt;
help would be greatly appreciated. Thanks for all of your &lt;br /&gt;
hard work, it is appreciated.&lt;/p&gt;
&lt;p&gt;Sincere Regards,&lt;/p&gt;
&lt;p&gt;Jody Davis&lt;br /&gt;
jody.w.davis@mci.com&lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Anonymous</dc:creator><pubDate>Sat, 10 Jan 2004 22:06:09 -0000</pubDate><guid isPermaLink="false">https://sourceforge.net304156235c0a07724d5f3a26fc564fa0a2ecb20a</guid></item><item><title>Driver needed for Linksys wpc11 v4</title><link>https://sourceforge.net/p/pcmcia-cs/support-requests/166/</link><description>&lt;div class="markdown_content"&gt;&lt;p&gt;There are no drivers available that support the &lt;br /&gt;
Linksys wpc11 v4 in Linux. Especially Kernel 2.4.22. &lt;/p&gt;
&lt;p&gt;kyiadog@comcast.net &lt;/p&gt;&lt;/div&gt;</description><dc:creator xmlns:dc="http://purl.org/dc/elements/1.1/">Anonymous</dc:creator><pubDate>Thu, 25 Dec 2003 17:36:40 -0000</pubDate><guid isPermaLink="false">https://sourceforge.neta51f40b712b2658211cb7bbb99b964828706cdae</guid></item></channel></rss>