<?xml version="1.0" encoding="utf-8"?>
<feed xml:lang="en" xmlns="http://www.w3.org/2005/Atom"><title>Recent changes to bugs</title><link href="https://sourceforge.net/p/tulip/bugs/" rel="alternate"/><link href="https://sourceforge.net/p/tulip/bugs/feed.atom" rel="self"/><id>https://sourceforge.net/p/tulip/bugs/</id><updated>2012-07-20T10:57:37Z</updated><subtitle>Recent changes to bugs</subtitle><entry><title>Wake on LAN fails</title><link href="https://sourceforge.net/p/tulip/bugs/82/" rel="alternate"/><published>2012-07-20T10:57:37Z</published><updated>2012-07-20T10:57:37Z</updated><author><name>alfonso</name><uri>https://sourceforge.net/u/japastor/</uri></author><id>https://sourceforge.net59316c250d6079f8e3c6b07359383594ce8e3983</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;I have a hundred of Fujitsu P300 with Debian Squeeze, lspci shows:&lt;/p&gt;
&lt;p&gt;02:01.0 Ethernet controller [0200]: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 [1317:0985] (rev 11)&lt;br /&gt;
Subsystem: Fujitsu Technology Solutions Scenic N300 ADMtek AN983 10/100 Mbps PCI Adapter [1734:100c]&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx-&lt;br /&gt;
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR- INTx-&lt;br /&gt;
Latency: 64 (16000ns min, 32000ns max), Cache Line Size: 32 bytes&lt;br /&gt;
Interrupt: pin A routed to IRQ 23&lt;br /&gt;
Region 0: I/O ports at 3000 [size=256]&lt;br /&gt;
Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=1K]&lt;br /&gt;
Expansion ROM at 20000000 [disabled] [size=128K]&lt;br /&gt;
Capabilities: [c0] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-&lt;br /&gt;
Kernel driver in use: tulip&lt;/p&gt;
&lt;h1 id="scenario-141"&gt;Scenario 1)&lt;/h1&gt;
&lt;p&gt;With kernel &lt;/p&gt;
&lt;p&gt;ii  linux-image-2.6.32-5-686            2.6.32-45 &lt;/p&gt;
&lt;p&gt;the driver tulip hasn't support for ethtool . Sample:&lt;/p&gt;
&lt;p&gt;root@A52-PRO:~# ifconfig&lt;br /&gt;
eth0      Link encap:Ethernet  HWaddr 00:30:05:44:52:08&lt;br /&gt;
inet addr:172.19.231.113  Bcast:172.19.231.255  Mask:255.255.255.0&lt;br /&gt;
inet6 addr: fe80::230:5ff:fe44:5208/64 Scope:Link&lt;br /&gt;
UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&lt;br /&gt;
RX packets:71475 errors:0 dropped:0 overruns:0 frame:0&lt;br /&gt;
TX packets:41620 errors:0 dropped:0 overruns:0 carrier:0&lt;br /&gt;
collisions:0 txqueuelen:1000 &lt;br /&gt;
RX bytes:93656966 (89.3 MiB)  TX bytes:4580530 (4.3 MiB)&lt;br /&gt;
Interrupt:23 Base address:0x3000 &lt;/p&gt;
&lt;p&gt;root@A52-PRO:~# ethtool eth0&lt;br /&gt;
Settings for eth0:&lt;br /&gt;
No data available&lt;br /&gt;
root@A52-PRO:~# &lt;/p&gt;
&lt;p&gt;But, if I turn off the P300, and then I run from my PC:&lt;/p&gt;
&lt;p&gt;wakeonlan 00:30:05:44:52:08&lt;br /&gt;
&lt;/p&gt;
&lt;p&gt;The Fujitsu P300 wakes up.&lt;/p&gt;
&lt;p&gt;Looking the tulip_core.c file I can confirm that does not support ethtool.&lt;/p&gt;
&lt;h1 id="scenario-241"&gt;Scenario 2)&lt;/h1&gt;
&lt;p&gt;With kernel:&lt;/p&gt;
&lt;p&gt;ii  linux-image-3.2.0-0.bpo.2-686-pae   3.2.12-1~bpo60+1                  Linux &lt;/p&gt;
&lt;p&gt;Now, the driver tulip has support for ethtool:&lt;/p&gt;
&lt;p&gt;root@A52-PRO:~# ethtool eth0&lt;br /&gt;
Settings for eth0:&lt;br /&gt;
Supports Wake-on: pg&lt;br /&gt;
Wake-on: d&lt;br /&gt;
root@A52-PRO:~# ethtool -s eth0 wol g&lt;br /&gt;
root@A52-PRO:~# ethtool eth0&lt;br /&gt;
Settings for eth0:&lt;br /&gt;
Supports Wake-on: pg&lt;br /&gt;
Wake-on: g&lt;br /&gt;
root@A52-PRO:~# &lt;/p&gt;
&lt;p&gt;But, if I turn off the P300, and then I run from my PC:&lt;/p&gt;
&lt;p&gt;wakeonlan 00:30:05:44:52:08&lt;br /&gt;
&lt;/p&gt;
&lt;p&gt;The Fujitsu P300 doesn't wake up.&lt;/p&gt;
&lt;p&gt;Looking the tulip_core.c file I can confirm it has support for ethtool.&lt;/p&gt;
&lt;h1 id="scenario-341"&gt;Scenario 3)&lt;/h1&gt;
&lt;p&gt;Return to kernel 2.6.32-45 and apply this patch:&lt;/p&gt;
&lt;p&gt;&lt;a href="http://simon.baatz.info/wol-support-for-an983b/" rel="nofollow"&gt;http://simon.baatz.info/wol-support-for-an983b/&lt;/a&gt;&lt;br /&gt;
&lt;a href="http://simon.baatz.info/downloads/tulip_an983b_wol_lucid-2.6.32-22.patch" rel="nofollow"&gt;http://simon.baatz.info/downloads/tulip_an983b_wol_lucid-2.6.32-22.patch&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Rebuild and install the kernel, reboot and:&lt;/p&gt;
&lt;p&gt;root@A52-PRO:~# ethtool eth0&lt;br /&gt;
Settings for eth0:&lt;br /&gt;
Supports Wake-on: pg&lt;br /&gt;
Wake-on: d&lt;br /&gt;
root@A52-PRO:~# ethtool -s eth0 wol g&lt;br /&gt;
root@A52-PRO:~# ethtool eth0&lt;br /&gt;
Settings for eth0:&lt;br /&gt;
Supports Wake-on: pg&lt;br /&gt;
Wake-on: g&lt;br /&gt;
root@A52-PRO:~# &lt;/p&gt;
&lt;p&gt;OK, I have kernel 2.6.32 with ethtool support. But:&lt;/p&gt;
&lt;p&gt;wakeonlan 00:30:05:44:52:08&lt;br /&gt;
&lt;/p&gt;
&lt;p&gt;Fails again.&lt;/p&gt;
&lt;h1 id="conclusion"&gt;Conclusion&lt;/h1&gt;
&lt;p&gt;The code added to tulip_core.c for ethtool support makes fail wake on lan in this ethernet card.&lt;br /&gt;
I would like to have ethtool support and wake on lan running. Is it possible?&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>make install fails on doc_generation</title><link href="https://sourceforge.net/p/tulip/bugs/81/" rel="alternate"/><published>2012-02-15T14:01:20Z</published><updated>2012-02-15T14:01:20Z</updated><author><name>Dennis </name><uri>https://sourceforge.net/u/stumbles/</uri></author><id>https://sourceforge.net581d4d7a8989e29a3f5a2730efc9d22a0f159bd7</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;tulip-3.6.1 fails on doc generation with Sphinx-1.1.2 with;&lt;/p&gt;
&lt;p&gt;[100%] Built target InteractorMagicSelection-3.6.1&lt;br /&gt;
[100%] Checking if documentation files are present&lt;br /&gt;
[100%] Built target doc_generation&lt;br /&gt;
Traceback (most recent call last):&lt;br /&gt;
File "/usr/bin/sphinx-build", line 5, in &amp;lt;module&amp;gt;&lt;br /&gt;
from pkg_resources import load_entry_point&lt;br /&gt;
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 2709, in &amp;lt;module&amp;gt;&lt;br /&gt;
working_set.require(__requires__)&lt;br /&gt;
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 686, in require&lt;br /&gt;
needed = self.resolve(parse_requirements(requirements))&lt;br /&gt;
File "/usr/lib/python2.7/site-packages/pkg_resources.py", line 584, in resolve&lt;br /&gt;
raise DistributionNotFound(req)&lt;br /&gt;
pkg_resources.DistributionNotFound: Pygments&amp;gt;=1.2&lt;br /&gt;
[100%] Built target pythonBindingsDoc&lt;br /&gt;
Install the project...&lt;/p&gt;
&lt;p&gt;Then when it tries to install;&lt;/p&gt;
&lt;p&gt;-- Installing: /usr/share/tulip/bitmaps/candiSprite.png&lt;br /&gt;
-- Installing: /usr/share/tulip/bitmaps/edgeBlomSprite.png&lt;br /&gt;
-- Installing: /usr/share/tulip/bitmaps/edgeSpring.png&lt;br /&gt;
-- Installing: /usr/share/tulip/bitmaps/titlebarGradient.png&lt;br /&gt;
-- Installing: /usr/share/tulip/tulip361.qhc&lt;br /&gt;
-- Installing: /usr/share/tulip/tulip361.qch&lt;br /&gt;
CMake Error at docs/python/cmake_install.cmake:36 (FILE):&lt;br /&gt;
file INSTALL cannot find&lt;br /&gt;
"/usr/src/tulip-3.6.1-src/tulip-oosb/docs/python/html".&lt;br /&gt;
Call Stack (most recent call first):&lt;br /&gt;
docs/cmake_install.cmake:44 (INCLUDE)&lt;br /&gt;
cmake_install.cmake:59 (INCLUDE)&lt;/p&gt;
&lt;p&gt;make: *** [install] Error 1&lt;/p&gt;
&lt;p&gt;Using -DBUILD_DOC=OFF had no effect.&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Possible bug in tulip_interrupt</title><link href="https://sourceforge.net/p/tulip/bugs/80/" rel="alternate"/><published>2009-03-28T17:53:13Z</published><updated>2009-03-28T17:53:13Z</updated><author><name>Andreas T�nnesen</name><uri>https://sourceforge.net/u/kattemat/</uri></author><id>https://sourceforge.net26257543c1bb24c9323ac2ce39c434f547cecb9f</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;I'm reporting this based on a project where I did a bugfix on a modified tulip driver. I'm not sure if the current behavior is intended or not, but it made the RX processing on the chip in question(DM9103) RX never be restarted when an error was reported in the interrupt.&lt;br /&gt;
In tulip_interrupt the error reports bits in CSR5 are cleared early in the function(a local copy is kept). Then if the NoRxBuf bit is set, tulip_refill_rx is called. This function again reads CSR5 and has a conditional on the bits that were actually cleared in the interrupt handler and this is the place where the RX processing is restarted upon failure. I do realize that tulip_refill_rx is called from other places as well, so this might have been the intended behavior from the start, but for our chipset it caused a hang.&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>bug in Hierarchical Graph plugin</title><link href="https://sourceforge.net/p/tulip/bugs/79/" rel="alternate"/><published>2007-04-03T09:19:45Z</published><updated>2007-04-03T09:19:45Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.netffad8106c52734b1ecf8df5ed9ba260e73965ba0</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Hi,&lt;/p&gt;
&lt;p&gt;There is a bug in Hierarchical Graph layout plugin: node-node and layer spacing do not work. Variables used to set that are declared in both HierarchicalGraph.cpp and HierarchicalGraph.h.&lt;br /&gt;
Bye.&lt;br /&gt;
Romain.&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>module usage count is zero although card is in use</title><link href="https://sourceforge.net/p/tulip/bugs/78/" rel="alternate"/><published>2005-09-21T22:16:54Z</published><updated>2005-09-21T22:16:54Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.netbd61a6c52046c533b04f137d6c318c5d651840a1</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Hi,&lt;/p&gt;
&lt;p&gt;I'm sending this bug report through the tulip driver.&lt;br /&gt;
But the usage count in /proc/modules is zero:&lt;/p&gt;
&lt;p&gt;# grep tulip /proc/modules&lt;br /&gt;
tulip 47168 0 - Live 0xcaa4e000&lt;/p&gt;
&lt;p&gt;# ifconfig&lt;br /&gt;
[...]&lt;br /&gt;
eth1      Link encap:Ethernet  HWaddr XX:XX:XX:XX:XX:XX&lt;br /&gt;
inet addr:192.168.1.1  Bcast:192.168.1.255 &lt;br /&gt;
Mask:255.255.255.0&lt;br /&gt;
inet6 addr: XXXXX/64 Scope:Link&lt;br /&gt;
UP BROADCAST MULTICAST  MTU:1500  Metric:1&lt;br /&gt;
RX packets:6639 errors:328 dropped:0&lt;br /&gt;
overruns:0 frame:0&lt;br /&gt;
TX packets:6583 errors:5 dropped:0 overruns:0&lt;br /&gt;
carrier:5&lt;br /&gt;
collisions:0 txqueuelen:1000 &lt;br /&gt;
RX bytes:926926 (905.2 KiB)  TX bytes:4046025&lt;br /&gt;
(3.8 MiB)&lt;br /&gt;
Interrupt:11 Base address:0xcc00 &lt;br /&gt;
[...]&lt;/p&gt;
&lt;p&gt;# ls /sys/class/net/eth1/driver/&lt;br /&gt;
0000:00:06.0  new_id&lt;/p&gt;
&lt;p&gt;# lspci&lt;br /&gt;
0000:00:06.0 Ethernet controller: Davicom&lt;br /&gt;
Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100&lt;br /&gt;
Ethernet (rev 31)&lt;/p&gt;
&lt;p&gt;I'm running debian stable/testing. The kernel is from&lt;br /&gt;
debian, "kernel-image-2.6.8-2-686" version 2.6.8-13.&lt;/p&gt;
&lt;p&gt;# uname -a&lt;br /&gt;
Linux gate 2.6.8-2-686 #1 Mon Jan 24 03:58:38 EST 2005&lt;br /&gt;
i686 GNU/Linux&lt;/p&gt;
&lt;p&gt;Removing the module makes the network connection&lt;br /&gt;
unavailable. It is a bit hard to debug as the card is&lt;br /&gt;
in a headless server...&lt;/p&gt;
&lt;p&gt;onno@gmx.net&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Half-Duplex Selected instead of Full-Duplex</title><link href="https://sourceforge.net/p/tulip/bugs/77/" rel="alternate"/><published>2005-09-18T21:48:51Z</published><updated>2005-09-18T21:48:51Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.netd2a2660539f8555fa3307ac5b15e211f3ecc48a7</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Linux 2.6.13.2, AMD Athlon&lt;/p&gt;
&lt;p&gt;0000:00:11.0 Ethernet controller: Digital Equipment&lt;br /&gt;
Corporation DECchip 21140 [FasterNet] (rev 20)&lt;/p&gt;
&lt;p&gt;For some strange reason, my card seems to report pick&lt;br /&gt;
half-duplex when the connection is capable of&lt;br /&gt;
full-duplex on bootup.  Disconnecting and reconnecting&lt;br /&gt;
the network connection, then running&lt;br /&gt;
/etc/init.d/networking restart (a Debian system) will&lt;br /&gt;
cause the connection to be properly detected.&lt;/p&gt;
&lt;p&gt;tulip0:  EEPROM default media type Autosense.&lt;br /&gt;
tulip0:  Index #0 - Media MII (#11) described by a&lt;br /&gt;
21140 MII PHY (1) block.&lt;br /&gt;
tulip0:  MII transceiver #1 config 3100 status 782b&lt;br /&gt;
advertising 01e1.&lt;/p&gt;
&lt;p&gt;[snip]&lt;/p&gt;
&lt;p&gt;eth0: Setting half-duplex based on MII#1 link partner&lt;br /&gt;
capability of 0000.&lt;/p&gt;
&lt;p&gt;[snip, connection reset, networking restarted]&lt;/p&gt;
&lt;p&gt;eth0: Setting full-duplex based on MII#1 link partner&lt;br /&gt;
capability of 05e1.&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Problem in tulip_read_eeprom() with 6 bit addressing</title><link href="https://sourceforge.net/p/tulip/bugs/76/" rel="alternate"/><published>2005-03-30T10:20:29Z</published><updated>2005-03-30T10:20:29Z</updated><author><name>Daniel Forsgren</name><uri>https://sourceforge.net/u/danfo/</uri></author><id>https://sourceforge.net00b1ed3371db78c25491719475b008911c8f7f8b</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;h1 id="problem"&gt;Problem&lt;/h1&gt;
&lt;p&gt;There seems to be a problem when running the tulip&lt;br /&gt;
driver with 6 bit&lt;br /&gt;
address length:&lt;/p&gt;
&lt;p&gt;The tulip_read_eeprom() function sets up a read command&lt;br /&gt;
like:&lt;/p&gt;
&lt;p&gt;int read_cmd = location | (EE_READ_CMD &amp;lt;&amp;lt; addr_len);&lt;/p&gt;
&lt;p&gt;where location is the offset (within the eeprom) and&lt;br /&gt;
addr_len is&lt;br /&gt;
either 6 or 8 bits. However, with addr_len == 6 and&lt;br /&gt;
location &amp;gt; 0x3f,&lt;br /&gt;
the most significant locations bits will overlap with&lt;br /&gt;
the read command&lt;br /&gt;
itself.&lt;/p&gt;
&lt;p&gt;Thus, with 6 bit addressing, tulip_read_eeprom() must&lt;br /&gt;
not be called&lt;br /&gt;
with location &amp;gt; 0x3f. Unfortunately, in tulip_core.c,&lt;br /&gt;
it's called with&lt;br /&gt;
location up to sizeof(tp-&amp;gt;eeprom)/2, which should be&lt;br /&gt;
0x100 if I'm not&lt;br /&gt;
mistaken. In the same way de2104x.c uses locations up to&lt;br /&gt;
DE_EEPROM_WORDS, which is equal to 256 too.&lt;/p&gt;
&lt;h1 id="how-to-fix"&gt;How-to-fix&lt;/h1&gt;
&lt;p&gt;Make sure that the location is masked corresponding to&lt;br /&gt;
add_len in&lt;br /&gt;
tulip_read_eeprom().&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>de2104x irq problem</title><link href="https://sourceforge.net/p/tulip/bugs/75/" rel="alternate"/><published>2005-01-15T10:39:55Z</published><updated>2005-01-15T10:39:55Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.net2d960eeae56f1d7624379a9dc3216200fe0dfc25</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;When booting 2.6.10 (vanilla) I get this error:&lt;/p&gt;
&lt;p&gt;Dec 27 17:36:25 shelob kernel: de2104x PCI Ethernet&lt;br /&gt;
driver v0.7 (Mar 17, 2004)&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: ACPI: PCI interrupt&lt;br /&gt;
0000:00:07.0[A] -&amp;gt; GSI 18 (level, low) -&amp;gt; IRQ 18&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: eth1: 21040 at&lt;br /&gt;
0xd0efef00, 00:c0:95:ee:ff:67, IRQ 12&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: eth1: enabling interface&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: eth1: set link 10baseT-HD&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: eth1:    mode&lt;br /&gt;
0xfffc0040, sia 0xffffffcc,0xffff8f01,0xffffffff,0xffff0000&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: eth1:    set mode&lt;br /&gt;
0xfffc0040, set sia 0x8f01,0xffff,0x0&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: irq 18: nobody cared!&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c013216a&amp;gt;]&lt;br /&gt;
__report_bad_irq+0x2a/0x90&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c0131c10&amp;gt;]&lt;br /&gt;
handle_IRQ_event+0x30/0x70&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c013225c&amp;gt;]&lt;br /&gt;
note_interrupt+0x6c/0xd0&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c0131d2a&amp;gt;]&lt;br /&gt;
__do_IRQ+0xda/0xf0&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c0105299&amp;gt;]&lt;br /&gt;
do_IRQ+0x19/0x30&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c01038fe&amp;gt;]&lt;br /&gt;
common_interrupt+0x1a/0x20&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: handlers:&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: [&amp;lt;c0255650&amp;gt;]&lt;br /&gt;
(usb_hcd_irq+0x0/0x70)&lt;br /&gt;
Dec 27 17:36:25 shelob kernel: Disabling IRQ #18&lt;/p&gt;
&lt;p&gt;Afterwards the card doesn't work.&lt;br /&gt;
It worked last in 2.6.9 I think.&lt;/p&gt;
&lt;p&gt;lspci output:&lt;br /&gt;
0000:00:00.0 Host bridge: VIA Technologies, Inc.&lt;br /&gt;
VT8366/A/7 [Apollo KT266/A/333]&lt;br /&gt;
0000:00:01.0 PCI bridge: VIA Technologies, Inc.&lt;br /&gt;
VT8366/A/7 [Apollo KT266/A/333 AGP]&lt;br /&gt;
0000:00:06.0 Ethernet controller: 3Com Corporation&lt;br /&gt;
3c905B 100BaseTX [Cyclone] (rev 30)&lt;br /&gt;
0000:00:07.0 Ethernet controller: Digital Equipment&lt;br /&gt;
Corporation DECchip 21040 [Tulip] (rev 24)&lt;br /&gt;
0000:00:08.0 Multimedia audio controller: Yamaha&lt;br /&gt;
Corporation YMF-724F [DS-1 Audio Controller] (rev 03)&lt;br /&gt;
0000:00:09.0 SCSI storage controller: Adaptec&lt;br /&gt;
AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)&lt;br /&gt;
0000:00:09.1 SCSI storage controller: Adaptec&lt;br /&gt;
AHA-2940U/UW / AHA-39xx / AIC-7895 (rev 03)&lt;br /&gt;
0000:00:0b.0 USB Controller: NEC Corporation USB (rev 41)&lt;br /&gt;
0000:00:0b.1 USB Controller: NEC Corporation USB (rev 41)&lt;br /&gt;
0000:00:0b.2 USB Controller: NEC Corporation USB 2.0&lt;br /&gt;
(rev 02)&lt;br /&gt;
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233&lt;br /&gt;
PCI to ISA Bridge&lt;br /&gt;
0000:00:11.1 IDE interface: VIA Technologies, Inc.&lt;br /&gt;
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE&lt;br /&gt;
(rev 06)&lt;br /&gt;
0000:00:11.2 USB Controller: VIA Technologies, Inc.&lt;br /&gt;
VT82xxxxx UHCI USB 1.1 Controller (rev 1b)&lt;br /&gt;
0000:00:11.3 USB Controller: VIA Technologies, Inc.&lt;br /&gt;
VT82xxxxx UHCI USB 1.1 Controller (rev 1b)&lt;br /&gt;
0000:00:11.4 USB Controller: VIA Technologies, Inc.&lt;br /&gt;
VT82xxxxx UHCI USB 1.1 Controller (rev 1b)&lt;br /&gt;
0000:01:00.0 VGA compatible controller: ATI&lt;br /&gt;
Technologies Inc Radeon R200 QL [Radeon 8500 LE]&lt;/p&gt;
&lt;p&gt;I tried disabling ACPI, APIC support to no avail.&lt;br /&gt;
I also tried to move the card around in the PCI slots.&lt;br /&gt;
I got the same error anyway (with a different IRQ)&lt;br /&gt;
I am not even sure it's a bug in this driver...&lt;/p&gt;
&lt;p&gt;The motheboard is an MSI KT266 Pro2A-RU&lt;br /&gt;
if you need more info please notify me&lt;br /&gt;
(oscar\at/axelero.hu)&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>Tulip driver freezes with kernel 2.4.26 and LNE100</title><link href="https://sourceforge.net/p/tulip/bugs/74/" rel="alternate"/><published>2004-08-07T21:45:40Z</published><updated>2004-08-07T21:45:40Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.net7cfe787f4d703f829a757c166e18dd73a584283f</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;Bug reported by Daniel Wagenaar,&lt;br /&gt;
wagenaar@alice.caltech.edu.&lt;/p&gt;
&lt;p&gt;[Using format as per&lt;br /&gt;
&lt;a href="http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html.\" rel="nofollow"&gt;http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html.\&lt;/a&gt;]&lt;/p&gt;
&lt;p&gt;1. Summary: Tulip driver freezes with kernel 2.4.26 and&lt;br /&gt;
Linksys  Network Everywhere Fast Ethernet 10/100 model&lt;br /&gt;
NC100 (rev 17).&lt;/p&gt;
&lt;p&gt;2. Details: Insmodding the tulip.o driver into 2.4.26&lt;br /&gt;
causes my (Athlon) computer to freeze. This doesn't&lt;br /&gt;
happen always instantly, but always within a second or&lt;br /&gt;
so. The computer is connected to a LAN. Previous&lt;br /&gt;
versions of the kernel (2.4.18) did not suffer from&lt;br /&gt;
this problem. I encountered this problem after&lt;br /&gt;
installing gentoo, but could reproduce it by compiling&lt;br /&gt;
2.4.26 under redhat. Intriguingly, the version of the&lt;br /&gt;
tulip driver at www.scyld.com/tulip.html, but not the&lt;br /&gt;
version in the 2.4.26 kernel tree, worked fine under a&lt;br /&gt;
previous version of gentoo, but caused a freeze under&lt;br /&gt;
latest version. Following data was obtained in a redhat&lt;br /&gt;
environment, with a kernel direct from www.kernel.org.&lt;/p&gt;
&lt;p&gt;3. Keywords: network driver, tulip, module, 2.4.26.&lt;/p&gt;
&lt;p&gt;4. Kernel version: 2.4.26&lt;/p&gt;
&lt;p&gt;5. Oops: System freezes without oops.&lt;/p&gt;
&lt;p&gt;6. Reproduce: "insmod tulip.o"&lt;/p&gt;
&lt;p&gt;7.1 ver_linux:&lt;/p&gt;
&lt;p&gt;Linux mea 2.4.26 #1 Fri Aug 6 17:50:58 PDT 2004 i686&lt;br /&gt;
unknown&lt;/p&gt;
&lt;p&gt;Gnu C                  2.96&lt;br /&gt;
Gnu make               3.79.1&lt;br /&gt;
util-linux             2.11n&lt;br /&gt;
mount                  2.11n&lt;br /&gt;
modutils               2.4.14&lt;br /&gt;
e2fsprogs              1.27&lt;br /&gt;
reiserfsprogs          3.x.0j&lt;br /&gt;
quota-tools            3.01.&lt;br /&gt;
PPP                    2.4.1&lt;br /&gt;
isdn4k-utils           3.1pre1&lt;br /&gt;
Linux C Library        2.2.5&lt;br /&gt;
Dynamic linker (ldd)   2.2.5&lt;br /&gt;
Procps                 2.0.7&lt;br /&gt;
Net-tools              1.60&lt;br /&gt;
Console-tools          0.3.3&lt;br /&gt;
Sh-utils               2.0.11&lt;br /&gt;
Modules Loaded&lt;/p&gt;
&lt;p&gt;7.2 /proc/cpuinfo:&lt;/p&gt;
&lt;p&gt;processor       : 0&lt;br /&gt;
vendor_id       : AuthenticAMD&lt;br /&gt;
cpu family      : 6&lt;br /&gt;
model           : 8&lt;br /&gt;
model name      : AMD Athlon(tm) XP 2700+&lt;br /&gt;
stepping        : 1&lt;br /&gt;
cpu MHz         : 2171.627&lt;br /&gt;
cache size      : 256 KB&lt;br /&gt;
fdiv_bug        : no&lt;br /&gt;
hlt_bug         : no&lt;br /&gt;
f00f_bug        : no&lt;br /&gt;
coma_bug        : no&lt;br /&gt;
fpu             : yes&lt;br /&gt;
fpu_exception   : yes&lt;br /&gt;
cpuid level     : 1&lt;br /&gt;
wp              : yes&lt;br /&gt;
flags           : fpu vme de pse tsc msr pae mce cx8&lt;br /&gt;
apic sep mtrr pge mca cmov&lt;br /&gt;
pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow&lt;br /&gt;
bogomips        : 4338.48&lt;/p&gt;
&lt;p&gt;7.3 /proc/modules: no modules&lt;/p&gt;
&lt;p&gt;7.4.a /proc/ioports: &lt;/p&gt;
&lt;p&gt;0000-001f : dma1&lt;br /&gt;
0020-003f : pic1&lt;br /&gt;
0040-005f : timer&lt;br /&gt;
0060-006f : keyboard&lt;br /&gt;
0080-008f : dma page reg&lt;br /&gt;
00a0-00bf : pic2&lt;br /&gt;
00c0-00df : dma2&lt;br /&gt;
00f0-00ff : fpu&lt;br /&gt;
0170-0177 : ide1&lt;br /&gt;
01f0-01f7 : ide0&lt;br /&gt;
0376-0376 : ide1&lt;br /&gt;
03c0-03df : vga+&lt;br /&gt;
03f6-03f6 : ide0&lt;br /&gt;
03f8-03ff : serial(auto)&lt;br /&gt;
0cf8-0cff : PCI conf1&lt;br /&gt;
d000-dfff : PCI Bus #01&lt;br /&gt;
d000-d0ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100&lt;br /&gt;
d400-d4ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100 (#2)&lt;br /&gt;
d800-d81f : Creative Labs SB Live! EMU10k1&lt;br /&gt;
dc00-dc07 : Creative Labs SB Live! MIDI/Game Port&lt;br /&gt;
e000-e01f : nVidia Corporation nForce2 SMBus (MCP)&lt;br /&gt;
f000-f00f : nVidia Corporation nForce2 IDE&lt;/p&gt;
&lt;p&gt;7.4.b /proc/iomem:&lt;/p&gt;
&lt;p&gt;00000000-0009fbff : System RAM&lt;br /&gt;
0009fc00-0009ffff : reserved&lt;br /&gt;
000a0000-000bffff : Video RAM area&lt;br /&gt;
000c0000-000c7fff : Video ROM&lt;br /&gt;
000f0000-000fffff : System ROM&lt;br /&gt;
00100000-1ffeffff : System RAM&lt;br /&gt;
00100000-002a4a8e : Kernel code&lt;br /&gt;
002a4a8f-00342afb : Kernel data&lt;br /&gt;
1fff0000-1fff2fff : ACPI Non-volatile Storage&lt;br /&gt;
1fff3000-1fffffff : ACPI Tables&lt;br /&gt;
e0000000-e3ffffff : PCI device 10de:01e0 (nVidia&lt;br /&gt;
Corporation)&lt;br /&gt;
e4000000-e5ffffff : PCI Bus #02&lt;br /&gt;
e4000000-e5ffffff : nVidia Corporation NV5M64 [RIVA&lt;br /&gt;
TNT2 Model 64/Model 64 Pro]&lt;br /&gt;
e6000000-e7ffffff : PCI Bus #02&lt;br /&gt;
e6000000-e6ffffff : nVidia Corporation NV5M64 [RIVA&lt;br /&gt;
TNT2 Model 64/Model 64 Pro]&lt;br /&gt;
e8000000-e9ffffff : PCI Bus #01&lt;br /&gt;
e9000000-e90003ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100&lt;br /&gt;
e9001000-e90013ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100 (#2)&lt;br /&gt;
ea000000-ea000fff : nVidia Corporation nForce2 USB&lt;br /&gt;
Controller&lt;br /&gt;
ea001000-ea001fff : nVidia Corporation nForce2 USB&lt;br /&gt;
Controller (#2)&lt;br /&gt;
ea001000-ea001fff : usb-ohci&lt;br /&gt;
ea002000-ea0020ff : nVidia Corporation nForce2 USB&lt;br /&gt;
Controller&lt;br /&gt;
ea002000-ea0020ff : ehci_hcd&lt;br /&gt;
fec00000-fec00fff : reserved&lt;br /&gt;
fee00000-fee00fff : reserved&lt;br /&gt;
ffff0000-ffffffff : reserved&lt;/p&gt;
&lt;p&gt;7.5 lspci -vvv:&lt;/p&gt;
&lt;p&gt;00:00.0 Host bridge: nVidia Corporation: Unknown&lt;br /&gt;
device 01e0 (rev a2)&lt;br /&gt;
Control: I/O- Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0&lt;br /&gt;
Region 0: Memory at e0000000 (32-bit,&lt;br /&gt;
prefetchable) [size=64M]&lt;br /&gt;
Capabilities: [40] AGP version 2.0&lt;br /&gt;
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2&lt;br /&gt;
Command: RQ=0 SBA- AGP- 64bit- FW-&lt;br /&gt;
Rate=x1&lt;br /&gt;
Capabilities: [60] #08 [2001]&lt;/p&gt;
&lt;p&gt;00:00.1 RAM memory: nVidia Corporation: Unknown&lt;br /&gt;
device 01eb (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c17&lt;br /&gt;
Control: I/O- Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;/p&gt;
&lt;p&gt;00:00.2 RAM memory: nVidia Corporation: Unknown&lt;br /&gt;
device 01ee (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c17&lt;br /&gt;
Control: I/O- Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;/p&gt;
&lt;p&gt;00:00.3 RAM memory: nVidia Corporation: Unknown&lt;br /&gt;
device 01ed (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c17&lt;br /&gt;
Control: I/O- Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;/p&gt;
&lt;p&gt;00:00.4 RAM memory: nVidia Corporation: Unknown&lt;br /&gt;
device 01ec (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c17&lt;br /&gt;
Control: I/O- Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;/p&gt;
&lt;p&gt;00:00.5 RAM memory: nVidia Corporation: Unknown&lt;br /&gt;
device 01ef (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c17&lt;br /&gt;
Control: I/O- Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;/p&gt;
&lt;p&gt;00:01.0 ISA bridge: nVidia Corporation: Unknown&lt;br /&gt;
device 0060 (rev a3)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle+&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0&lt;br /&gt;
Capabilities: [48] #08 [01e1]&lt;/p&gt;
&lt;p&gt;00:01.1 SMBus: nVidia Corporation: Unknown device&lt;br /&gt;
0064 (rev a2)&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O+ Mem- BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Interrupt: pin A routed to IRQ 5&lt;br /&gt;
Region 0: I/O ports at e000 [size=32]&lt;br /&gt;
Capabilities: [44] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1- D2-&lt;br /&gt;
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;00:02.0 USB Controller: nVidia Corporation: Unknown&lt;br /&gt;
device 0067 (rev a3) (prog-if 10 [OHCI])&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O+ Mem+ BusMaster- SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Interrupt: pin A routed to IRQ 10&lt;br /&gt;
Region 0: Memory at ea000000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=4K]&lt;br /&gt;
Capabilities: [44] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;00:02.1 USB Controller: nVidia Corporation: Unknown&lt;br /&gt;
device 0067 (rev a3) (prog-if 10 [OHCI])&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0 (750ns min, 250ns max)&lt;br /&gt;
Interrupt: pin B routed to IRQ 11&lt;br /&gt;
Region 0: Memory at ea001000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=4K]&lt;br /&gt;
Capabilities: [44] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;00:02.2 USB Controller: nVidia Corporation: Unknown&lt;br /&gt;
device 0068 (rev a3) (prog-if 20 [EHCI])&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O- Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0 (750ns min, 250ns max)&lt;br /&gt;
Interrupt: pin C routed to IRQ 3&lt;br /&gt;
Region 0: Memory at ea002000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=256]&lt;br /&gt;
Capabilities: [44] #0a [2080]&lt;br /&gt;
Capabilities: [80] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;00:08.0 PCI bridge: nVidia Corporation: Unknown&lt;br /&gt;
device 006c (rev a3) (prog-if 00 [Normal decode])&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0&lt;br /&gt;
Bus: primary=00, secondary=01,&lt;br /&gt;
subordinate=01, sec-latency=32&lt;br /&gt;
I/O behind bridge: 0000d000-0000dfff&lt;br /&gt;
Memory behind bridge: e8000000-e9ffffff&lt;br /&gt;
Prefetchable memory behind bridge:&lt;br /&gt;
fff00000-000fffff&lt;br /&gt;
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort-&lt;br /&gt;
&amp;gt;Reset- FastB2B-&lt;/p&gt;
&lt;p&gt;00:09.0 IDE interface: nVidia Corporation: Unknown&lt;br /&gt;
device 0065 (rev a2) (prog-if 8a [Master SecP PriP])&lt;br /&gt;
Subsystem: nVidia Corporation: Unknown device&lt;br /&gt;
0c11&lt;br /&gt;
Control: I/O+ Mem- BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 0 (750ns min, 250ns max)&lt;br /&gt;
Region 4: I/O ports at f000 [size=16]&lt;br /&gt;
Capabilities: [44] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1- D2-&lt;br /&gt;
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;00:1e.0 PCI bridge: nVidia Corporation: Unknown&lt;br /&gt;
device 01e8 (rev a2) (prog-if 00 [Normal decode])&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-&lt;br /&gt;
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32&lt;br /&gt;
Bus: primary=00, secondary=02,&lt;br /&gt;
subordinate=02, sec-latency=32&lt;br /&gt;
I/O behind bridge: 0000f000-00000fff&lt;br /&gt;
Memory behind bridge: e6000000-e7ffffff&lt;br /&gt;
Prefetchable memory behind bridge:&lt;br /&gt;
e4000000-e5ffffff&lt;br /&gt;
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort-&lt;br /&gt;
&amp;gt;Reset- FastB2B-&lt;/p&gt;
&lt;p&gt;01:06.0 Ethernet controller: Linksys Network&lt;br /&gt;
Everywhere Fast Ethernet 10/100 model NC100 (rev 11)&lt;br /&gt;
Subsystem: Linksys: Unknown device 0574&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32 (63750ns min, 63750ns max), cache&lt;br /&gt;
line size 08&lt;br /&gt;
Interrupt: pin A routed to IRQ 10&lt;br /&gt;
Region 0: I/O ports at d000 [size=256]&lt;br /&gt;
Region 1: Memory at e9000000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=1K]&lt;br /&gt;
Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&lt;br /&gt;
[size=128K]&lt;br /&gt;
Capabilities: [c0] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;01:07.0 Ethernet controller: Linksys Network&lt;br /&gt;
Everywhere Fast Ethernet 10/100 model NC100 (rev 11)&lt;br /&gt;
Subsystem: Linksys: Unknown device 0574&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32 (63750ns min, 63750ns max), cache&lt;br /&gt;
line size 08&lt;br /&gt;
Interrupt: pin A routed to IRQ 11&lt;br /&gt;
Region 0: I/O ports at d400 [size=256]&lt;br /&gt;
Region 1: Memory at e9001000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=1K]&lt;br /&gt;
Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&lt;br /&gt;
[size=128K]&lt;br /&gt;
Capabilities: [c0] Power Management version 2&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;01:08.0 Multimedia audio controller: Creative Labs SB&lt;br /&gt;
Live! EMU10k1 (rev 08)&lt;br /&gt;
Subsystem: Creative Labs CT4832 SBLive! Value&lt;br /&gt;
Control: I/O+ Mem- BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32 (500ns min, 5000ns max)&lt;br /&gt;
Interrupt: pin A routed to IRQ 5&lt;br /&gt;
Region 0: I/O ports at d800 [size=32]&lt;br /&gt;
Capabilities: [dc] Power Management version 1&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;01:08.1 Input device controller: Creative Labs SB&lt;br /&gt;
Live! MIDI/Game Port (rev 08)&lt;br /&gt;
Subsystem: Creative Labs Gameport Joystick&lt;br /&gt;
Control: I/O+ Mem- BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32&lt;br /&gt;
Region 0: I/O ports at dc00 [size=8]&lt;br /&gt;
Capabilities: [dc] Power Management version 1&lt;br /&gt;
Flags: PMEClk- DSI- D1+ D2+&lt;br /&gt;
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;/p&gt;
&lt;p&gt;02:00.0 VGA compatible controller: nVidia Corporation&lt;br /&gt;
NV6 [Vanta] (rev 15) (prog-if 00 [VGA])&lt;br /&gt;
Subsystem: Unknown device 17f2:8010&lt;br /&gt;
Control: I/O+ Mem+ BusMaster+ SpecCycle-&lt;br /&gt;
MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-&lt;br /&gt;
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr-&lt;br /&gt;
DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR-&lt;br /&gt;
Latency: 32 (1250ns min, 250ns max)&lt;br /&gt;
Interrupt: pin A routed to IRQ 11&lt;br /&gt;
Region 0: Memory at e6000000 (32-bit,&lt;br /&gt;
non-prefetchable) [size=16M]&lt;br /&gt;
Region 1: Memory at e4000000 (32-bit,&lt;br /&gt;
prefetchable) [size=32M]&lt;br /&gt;
Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&lt;br /&gt;
[size=64K]&lt;br /&gt;
Capabilities: [60] Power Management version 1&lt;br /&gt;
Flags: PMEClk- DSI- D1- D2-&lt;br /&gt;
AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)&lt;br /&gt;
Status: D0 PME-Enable- DSel=0&lt;br /&gt;
DScale=0 PME-&lt;br /&gt;
Capabilities: [44] AGP version 2.0&lt;br /&gt;
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2&lt;br /&gt;
Command: RQ=0 SBA- AGP- 64bit- FW-&lt;br /&gt;
Rate=&amp;lt;none&amp;gt;&lt;/p&gt;
&lt;p&gt;7.6 /proc/scsi/scsi&lt;/p&gt;
&lt;p&gt;Attached devices:&lt;br /&gt;
Host: scsi0 Channel: 00 Id: 00 Lun: 00&lt;br /&gt;
Vendor: PIONEER  Model: DVD-RW  DVR-104  Rev: 1.41&lt;br /&gt;
Type:   CD-ROM                           ANSI SCSI&lt;br /&gt;
revision: 02&lt;/p&gt;
&lt;p&gt;7.7 Other info: -&lt;/p&gt;
&lt;p&gt;X. Other notes: In 2.4.18, all is well. In&lt;br /&gt;
/proc/ioports, the tulip driver is seen to grab the device:&lt;/p&gt;
&lt;p&gt;d000-d0ff : Linksys Network Everywhere Fast Ethernet&lt;br /&gt;
10/100 model NC100&lt;br /&gt;
d000-d0ff : tulip&lt;br /&gt;
d400-d4ff : Linksys Network Everywhere Fast Ethernet&lt;br /&gt;
10/100 model NC100 (#2)&lt;br /&gt;
d400-d4ff : tulip&lt;/p&gt;
&lt;p&gt;and same in /proc/iomem:&lt;/p&gt;
&lt;p&gt;e9000000-e90003ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100&lt;br /&gt;
e9000000-e90003ff : tulip&lt;br /&gt;
e9001000-e90013ff : Linksys Network Everywhere Fast&lt;br /&gt;
Ethernet 10/100 model NC100 (#2)&lt;br /&gt;
e9001000-e90013ff : tulip&lt;/p&gt;
&lt;p&gt;It happily shares IRQs: /proc/interrupts says:&lt;/p&gt;
&lt;p&gt;CPU0&lt;br /&gt;
0:      85528          XT-PIC  timer&lt;br /&gt;
1:          4          XT-PIC  keyboard&lt;br /&gt;
2:          0          XT-PIC  cascade&lt;br /&gt;
3:          0          XT-PIC  ehci-hcd&lt;br /&gt;
8:          1          XT-PIC  rtc&lt;br /&gt;
10:          9          XT-PIC  usb-ohci, eth0&lt;br /&gt;
11:       2102          XT-PIC  usb-ohci, eth1&lt;br /&gt;
12:         20          XT-PIC  PS/2 Mouse&lt;br /&gt;
14:       4983          XT-PIC  ide0&lt;br /&gt;
15:         30          XT-PIC  ide1&lt;br /&gt;
NMI:          0&lt;br /&gt;
LOC:          0&lt;br /&gt;
ERR:          0&lt;br /&gt;
MIS:          0&lt;/p&gt;&lt;/div&gt;</summary></entry><entry><title>PNIC II claims full-duplex operation but is in half-duplex</title><link href="https://sourceforge.net/p/tulip/bugs/73/" rel="alternate"/><published>2004-06-25T22:14:16Z</published><updated>2004-06-25T22:14:16Z</updated><author><name>Anonymous</name><uri>https://sourceforge.net/u/userid-None/</uri></author><id>https://sourceforge.netab4de0550f1e4d868e3e86e176fb3d0d2634d13f</id><summary type="html">&lt;div class="markdown_content"&gt;&lt;p&gt;I have a tulip-based card, and it claimed to be in full-&lt;br /&gt;
duplex mode even though the switch said otherwise.&lt;br /&gt;
The confusion resulted in a number of errors reported by &lt;br /&gt;
ifconfig for eth0.&lt;/p&gt;
&lt;p&gt;I've since manually changed it to half-duplex with a &lt;br /&gt;
module option and the errors have gone away and &lt;br /&gt;
performance has improved dramatically.&lt;/p&gt;
&lt;p&gt;System info:&lt;/p&gt;
&lt;p&gt;Linux fs 2.4.26-1-386 #2 Sat May 1 16:31:24 EST 2004 &lt;br /&gt;
i686 GNU/Linux&lt;/p&gt;
&lt;p&gt;Bus  0, device   8, function  0:&lt;br /&gt;
Ethernet controller: Lite-On Communications Inc &lt;br /&gt;
LNE100TX [Linksys EtherFast&lt;br /&gt;
10/100] (rev 37).&lt;br /&gt;
IRQ 19.&lt;br /&gt;
Master Capable.  Latency=64.  Min Gnt=8.Max &lt;br /&gt;
Lat=56.&lt;br /&gt;
I/O at 0xd800 [0xd8ff].&lt;br /&gt;
Non-prefetchable 32 bit memory at 0xdbfbff00 &lt;br /&gt;
[0xdbfbffff].&lt;/p&gt;
&lt;p&gt;Here's a dump from tulip-diag:&lt;/p&gt;
&lt;p&gt;tulip-diag.c:v2.18 11/12/2003 Donald Becker &lt;br /&gt;
(becker@scyld.com)&lt;br /&gt;
&lt;a href="http://www.scyld.com/diag/index.html" rel="nofollow"&gt;http://www.scyld.com/diag/index.html&lt;/a&gt;&lt;br /&gt;
Index #1: Found a Lite-On PNIC-II adapter at 0xd800.&lt;br /&gt;
Lite-On PNIC-II chip registers at 0xd800:&lt;br /&gt;
0x00: fff88000 ffffffff ffffffff 1259f000 1259f200 &lt;br /&gt;
e4660000 03862002 effffbff&lt;br /&gt;
0x40: fffe0000 00fecf00 ffffa59b fffe0000 000000cc &lt;br /&gt;
ffff0000 fff4ee39 fff00000&lt;br /&gt;
Extended registers:&lt;br /&gt;
0x80: 03300000 03300000 03300000 03300000 &lt;br /&gt;
03300000 03300000 f00fffe0 fc0fffe0&lt;br /&gt;
0xa0: 2000427f 2000427f 00001150 00001150 75f0682f &lt;br /&gt;
75f0682f c000c000 c000c000&lt;br /&gt;
0xc0: 75f0682f 75f0682f 00000000 00000000 00000000 &lt;br /&gt;
00000000 00000000 00000000&lt;br /&gt;
0xe0: 00000000 00000000 00000000 00000000 &lt;br /&gt;
00000000 00000000 00000000 00000000&lt;br /&gt;
Port selection is 100baseTx, half-duplex.&lt;br /&gt;
Transmit started, Receive started.&lt;br /&gt;
The Rx process state is 'Waiting for packets'.&lt;br /&gt;
The Tx process state is 'Idle'.&lt;br /&gt;
The transmit threshold is 128.&lt;br /&gt;
The NWay status register is 000000cc.&lt;br /&gt;
100baseTx link good.&lt;br /&gt;
10baseT link good.&lt;br /&gt;
The current PNIC-II MAC address is 00:c0:f0:75:2f:68 &lt;br /&gt;
(c000c000 75f0682f).&lt;br /&gt;
The current PNIC-II WOL address is 00:c0:f0:75:2f:68.&lt;br /&gt;
EEPROM 64 words, 6 address bits.&lt;br /&gt;
Ethernet MAC Station Address 00:c0:f0:75:2f:68.&lt;br /&gt;
Wake-On-LAN ID bytes c0:00:75:f0:68:2f.&lt;br /&gt;
PCI Subsystem IDs  Vendor 2646 Device 0b00&lt;br /&gt;
No MII transceivers found!&lt;br /&gt;
Internal autonegotiation state is 'Autonegotiation &lt;br /&gt;
disabled'.&lt;/p&gt;
&lt;p&gt;I'd like to get this card running in full-duplex mode, but &lt;br /&gt;
forcing it just seems to cause more errors and degraded &lt;br /&gt;
performance.&lt;/p&gt;
&lt;p&gt;Jonathan&lt;/p&gt;&lt;/div&gt;</summary></entry></feed>