Audience
Companies looking for an ultimate heavy-duty home lab router devicec
About RB5009UG+S+IN
Double the usual performance: we took your feedback from the MikroTik User Meetings to create the perfect home lab router: compact, powerful, with multiple powering options and efficient cooling.RB5009 has it all, and even more! The board features 9 wired ports and a full-sized USB 3.0. Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage. All the ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU. Both CPU and the switch-chip are located on the bottom of the board – so the case acts as a massive heat-sink! Boards come with 1GB of DDR4 RAM and 1GB NAND storage. This combination of ports and components, compared to our other products in a similar form factor, provides almost double the performance in configurations with heavy CPU loads.
Other Popular Alternatives & Related Software
CCR2216-1G-12XS-2XQ
Start your 100 Gigabit journey with our new flagship product: the Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072. But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines! There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port. The device comes with 16 GB of RAM, decent NAND storage, and two M.2 SATA slots for additional storage. There are four hot-swappable fans, as well as dual-redundant hot-swap power supplies. And these PSUs might look familiar if you have used our CCR1072 before: you can keep using your previous hot-swap power supplies and SFP modules.
Learn more about CCR2216-1G-12XS-2XQ
CCR2116-12G-4S+
We wanted to see the full potential of the good, old, reliable 10G networking combined with a modern CPU. CCR2116-12G-4S+ allows you to forget about CPU limitations in your setup. Like its younger brother – the amazing CCR2004, this router features the mighty Amazon Annapurna Labs Alpine CPU. But with 16 cores running at 2 GHz, this CCR eats the other one for breakfast. For example, we see at least a 15% increase in single-core performance. And that is the most important aspect when it comes to heavy operations based on per-connection processing. Like queues, for example. CCR2116-12G-4S+ sets a new standard of single-core performance in the whole CCR product family! And it supports Layer 3 Hardware Offloading! Obviously, you need the right connectivity to harness this power. There are four 10G SFP+ ports. They have a separate, full-duplex line connected to the Marvell Aldrin family switch chip. Then we have Gigabit Ethernet ports. 12 of them are running through the Marvel chip.
Learn more about CCR2116-12G-4S+
RB2011iLS-IN
Desktop metal case, 5xEthernet, 5xGigabit Ethernet, SFP cage, PoE out on port 10, 600MHz CPU, 64MB RAM, RouterOS L4. RB2011iLS is our first product with SFP cage for gigabit SFP transceivers and an ideal solution for FTTH (Fiber To The Home) implementations. The RB2011iLS has 11 ports, Gigabit SFP cage and five Gigabit Ethernet ports that can be switched together providing an affordable wire-speed fiber-to-copper converter, and additional five fast Ethernet ports. The board can be powered by power jack or PoE. Note that SFP transceiver is not included. RB2011iLS supports any 1.25G SFP transceivers that are within the SFF committee specifications for SFP transceivers. RB2011LS doesn’t have hardware support for PON (Passive Optical Network). Tested and recommended to use with MikroTik SFP modules S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) It’s powered by the new Atheros next generation 600MHz 74K MIPS network processor and has 64MB of RAM and a Level4 RouterOS license.
Learn more about RB2011iLS-IN
FiberBox Plus
There are two ways to look at the brand new Fiber Box Plus. On the one hand, it’s a massive upgrade of our previous FiberBox devices. This version features a modern ARM CPU, more RAM, and four 10-Gigabit SFP+ ports. Fast and reliable connectivity on a budget. Without the distance limitations of Ethernet. There’s also a Gigabit Ethernet port for management purposes or PoE-in powering. We’ve also included a 2-pin terminal and a standard DC jack, so you have 3 different power options to choose from. FiberBox Plus supports a wide input voltage range of 24-57V. And it is remarkably efficient: maximum power consumption (without attachments) is only 7W. Another way to look at the new FiberBox Plus – it’s a budget version of the amazing netFiber 9. You can save a lot of money if you don’t need the extra Gigabit SFP ports. It even features the same impressive Marvell 98DX226S switch-chip, so the performance is definitely there!
Learn more about FiberBox Plus
Pricing
Starting Price:
$219 one-time payment
Integrations
Company Information
MikroTik
Founded: 2009
United States
mikrotik.com/product/rb5009ug_s_in
Videos and Screen Captures
Other Useful Business Software
$300 Free Credits to Build on Google Cloud
Put your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
Product Details
Training
Documentation
Webinars
In Person
Videos
Support
Online
RB5009UG+S+IN Frequently Asked Questions
Q: What kinds of users and organization types does RB5009UG+S+IN work with?
RB5009UG+S+IN works with these users and organization types: Mid Size Business, Small Business, Enterprise, Freelance, Nonprofit, Government, and Startup.
Q: What languages does RB5009UG+S+IN support in their product?
RB5009UG+S+IN supports these languages: English.
Q: What kind of support options does RB5009UG+S+IN offer?
RB5009UG+S+IN offers support via online.
Q: What other applications or services does RB5009UG+S+IN integrate with?
RB5009UG+S+IN integrates with: Deskworks.
Q: What type of training does RB5009UG+S+IN provide?
RB5009UG+S+IN provides training in the form of documentation, webinars, in person, and videos.
Q: How much does RB5009UG+S+IN cost?
Pricing for RB5009UG+S+IN starts at $219 one-time payment.
