siemkorteweg Activity

Activity for Siem Korteweg

  • Siem Korteweg Siem Korteweg committed [r6320]

    Add zabbix include files and directories

  • Siem Korteweg Siem Korteweg committed [r6319]

    Fix syntax error in software module

  • Siem Korteweg Siem Korteweg committed [r6318]

    Skip by default cisco discovery protocol

  • Siem Korteweg Siem Korteweg committed [r6317]

    Eliminate some volatile system data from snapshot

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Hi Sven, Did you check "Why is my scc client hanging?" of the http://sysconfcollect.sourceforge.net/examples/scc-help/scc/FAQ.html? When there is no child process of the "deepest" scc-collect process, you could run "strace" on it to find out what it is doing. Or you could run scc-collect only. Please refer to the manual page for the required option. regards, Siem

  • Siem Korteweg Siem Korteweg committed [r6316]

    Extend copyright to 2020

  • Siem Korteweg Siem Korteweg committed [r6315]

    Extend copyright to 2020

  • Siem Korteweg Siem Korteweg committed [r6314]

    Extend copyright to 2020

  • Siem Korteweg Siem Korteweg committed [r6313]

    Add crypto-policies and ssh_config.d and sshd_config.d files

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC-SRV

    You can indeed delete the files and then run 'scc-update -f' to regenerate the summaries without the removed systems. You can also run 'scc-realm -d -L <comma_separated_systems>' to remove the systems and generate the summaries.</comma_separated_systems>

  • Siem Korteweg Siem Korteweg committed [r6312]

    Add label option to assign (minimal) system via auto-realm-config.

  • Siem Korteweg Siem Korteweg committed [r6311]

    Label of client is attribute for auto realm management

  • Siem Korteweg Siem Korteweg committed [r6310]

    Add label to summary.data

  • Siem Korteweg Siem Korteweg committed [r6309]

    Ignore logins for Solaris

  • Siem Korteweg Siem Korteweg committed [r6308]

    Limit label to alpha-numeric

  • Siem Korteweg Siem Korteweg committed [r6307]

    compression ratio is variable zpool data

  • Siem Korteweg Siem Korteweg created a blog post

    Release of 1.26.73 of scc

  • Siem Korteweg Siem Korteweg committed [r6306]

    Start new release.

  • Siem Korteweg Siem Korteweg committed [r6305]

    Adopt FAQ and manual pages from release 1.26.73 of scc.

  • Siem Korteweg Siem Korteweg committed [r6304]

    Release 1.26.73 of scc.

  • Siem Korteweg Siem Korteweg committed [r6303]

    Finalize release scc 1.26.73

  • Siem Korteweg Siem Korteweg committed [r6302]

    Add release notes

  • Siem Korteweg Siem Korteweg committed [r6301]

    Change class of openvpn data from software to network

  • Siem Korteweg Siem Korteweg committed [r6300]

    More defensive programming for java check

  • Siem Korteweg Siem Korteweg committed [r6299]

    Ensure correct run of hp-ov tests

  • Siem Korteweg Siem Korteweg committed [r6298]

    Ensure processing by test of perms module

  • Siem Korteweg Siem Korteweg committed [r6297]

    Clarify difference between user and system modules and advice system modules (triggered by Keith Koene)

  • Siem Korteweg Siem Korteweg committed [r6296]

    Mention additional examples of user modules (indicated by Bill Dietrich)

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    The processes are already in the snapshot (for example http://sysconfcollect.sourceforge.net/examples/scc.centos70.html#cfg_system_processes). You will only need the extra module when you want a specific classification of the running/absent process.

  • Siem Korteweg Siem Korteweg modified a comment on discussion SCC

    Please have a look at /opt/scc/bin/scc-plugin. This is a template for a new module. When you make your new module a system module, it will be invoked automatically whenever scc is used. User modules need to be specified. I will make this disctinction more clear in this file. The indicated file contains all variables and files that are in place when the module runs. In your case the ${PROC_FILE} file contains all running processes when scc started, so there is no need to do your own 'ps -ef | grep...

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Please have a look at /opt/scc/bin/scc-plugin. This is a template for a new module. When you make your new module a system module, it will be invoked automatically whenever scc is used. User modules need to be specified. I will make this disctinction more clear in this file. The indicated file contains all variables and files that are in place when the module runs. In your case the ${PROC_FILE} file contains all running processed when scc started, so there is no need to do your own 'ps -ef | grep...

  • Siem Korteweg Siem Korteweg committed [r6295]

    Add windscribe (requested by Bill Dietrich)

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    The reason is I made a note to ask you for the output of the widscribe status and firewall commands, but never sent it to you and forgot about this. Please PM me the output and I will add the command.

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    I will add a reference.

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC-SRV

    Hello Keith, The released rpm does not contain a README. I recently have been made aware and fixed that in the development version. For the time being, you can have a look at https://sourceforge.net/p/sysconfcollect/code/HEAD/tree/scc-srv/trunk/README. It contains a short description of scc-srv. The details of the configuration, setup and operation of scc-srv can be found in manual page scc-srv(5) (add /opt/scc-srv/man to $MANPATH). This should get you going. Please let me know when you need additional...

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Hello Bill, Summarizing the emails we exchanged. Multiple updates have been done based upon your posts. First of all, a lot of implicit knowledge has been made more explicit. This will certainly help new users. The README file is now more generic, installed in the doc directory and mentioned in the post-install message. The README now also indicates the 'goal' of scc to assist in deciding in future extensions. The manual pages no longer contain remaining parts of escape sequences. The multiple use...

  • Siem Korteweg Siem Korteweg committed [r6294]

    Add sftp interface to obtain scc-data from clients

  • Siem Korteweg Siem Korteweg committed [r6293]

    Add 4MLinux installed addons and avoid starting the game pacman.

  • Siem Korteweg Siem Korteweg committed [r6292]

    Add NixOS channels

  • Siem Korteweg Siem Korteweg committed [r6291]

    Add Void Linux boot configuration

  • Siem Korteweg Siem Korteweg committed [r6290]

    Add xbps packages for Void Linux

  • Siem Korteweg Siem Korteweg committed [r6289]

    Indicate in pkg_files/README that scc-srv-install installs a non-packaged version of scc-srv (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6288]

    Indicate in pkg_files/README that scc-install installs a non-packaged version of scc (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6287]

    Issue warning when installing source after installing packaged version (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6286]

    Use test instead of [[ for NixOS to avoid errors with /bin/sh (reported by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6285]

    Fix typo

  • Siem Korteweg Siem Korteweg committed [r6284]

    Add NixOS system specification and installed packages

  • Siem Korteweg Siem Korteweg committed [r6283]

    Extend PATH for NixOS and ensure existence of transfer directory for source install

  • Siem Korteweg Siem Korteweg committed [r6282]

    Create data directory itself instead of parent

  • Siem Korteweg Siem Korteweg modified ticket #3

    With Realms Configured SCC Host Web Server presents Errors

  • Siem Korteweg Siem Korteweg posted a comment on ticket #3

    Hello Jeff, Good to see the issues have been resolved. I will close this bug. regards, Siem

  • Siem Korteweg Siem Korteweg committed [r6281]

    Set correct selinux context for multiple realms after upgrade

  • Siem Korteweg Siem Korteweg posted a comment on ticket #3

    I reproduced both errors by creating a realm with a space in the name. I have extended the tests of both scc and scc-srv to report this error and then fixed both files and ran the tests without errors. I have uploaded new versions of scc and scc-srv. Please check whether the new versions solve your issues.

  • Siem Korteweg Siem Korteweg committed [r6280]

    Handle realms with space in their name (reported by Jeff Wilkins)

  • Siem Korteweg Siem Korteweg committed [r6279]

    Handle realms with space in their name (reported by Jeff Wilkins)

  • Siem Korteweg Siem Korteweg modified a comment on ticket #3

    Could you please provide the SVN ID's of scc_0600_s_software and scc-summary? Does the name of one your realms contain a space?

  • Siem Korteweg Siem Korteweg posted a comment on ticket #3

    Could you please provide the SVN ID's of scc_0600_s_software and scc-summary?

  • Siem Korteweg Siem Korteweg committed [r6278]

    Minor updates in manual page of scc-pull

  • Siem Korteweg Siem Korteweg committed [r6277]

    Ignore messages from checksec

  • Siem Korteweg Siem Korteweg committed [r6276]

    Add protonvpn status (requested by Bill Dietrich)

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC-SRV

    Hello Jeff, Should have thought about that. The -O option now implies the -U option and creates and chowns the destination directory specified with the -s option. This reduces the number of steps in the manual page and makes the procedure more compact. Thank you for the hint. regards, Siem

  • Siem Korteweg Siem Korteweg committed [r6275]

    Automate destination directory with scc-pull -O <owner> (indicated by Jeff Wilkins)

  • Siem Korteweg Siem Korteweg committed [r6274]

    Facilitate additional processing of local home directories in user modules (indicated by Bill Dietrich).

  • Siem Korteweg Siem Korteweg committed [r6273]

    Support non-root transfer for systems behind a firewall (requested by Jeff Wilkins).

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC-SRV

    Hello Jeff, Instead of changing the ownership of transfer/cp I created subdirectory transfer/cp/scc and changed the ownership of this directory. Furthermore the -O option has been added to scc-pull to specify the ownership of the files on the gateway host. The manual page scc-srv(5) now also contains the commands for this non-root transfer from client to gateway to presentation server. I have also documented how to manage the lists of client systems of the gateway server by the presentation server....

  • Siem Korteweg Siem Korteweg committed [r6272]

    Avoid failed bats test and remove duplicate code

  • Siem Korteweg Siem Korteweg committed [r6271]

    Fail on multiple use of -S and -e options (indicated by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6270]

    fix typo

  • Siem Korteweg Siem Korteweg committed [r6269]

    Install README in doc (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6268]

    Install README in doc and indicate this file after install (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6267]

    Install README in doc and indicate this file after install and with -h options (triggered by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6266]

    Extend README (suggested by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6265]

    Extend README (suggested by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6264]

    Extend README (suggested by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6263]

    Eliminate escape-sequences from manual pages (reported by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6262]

    Eliminate escape-sequences from manual pages (reported by Bill Dietrich)

  • Siem Korteweg Siem Korteweg committed [r6261]

    Eliminate escape-sequences from manual pages (reported by Bill Dietrich)

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC-SRV

    Hello Jeff, I have implemented this exact setup several years ago and you made me wonder how I did that. When I looked for the details, it appeared that the ownership of the transfer/cp directory is controlled/reset via puppet. The manual page (scc-srv.5) contains the root-only setup on the client-proxy-scc-srv chain. For a native non-root setup I need to eliminate the 'ownership' of this directory from the rpm. I will also add a complete non-root example in the manual page. I will post here when...

  • Siem Korteweg Siem Korteweg committed [r6260]

    Ignore some more variable sysctl data

  • Siem Korteweg Siem Korteweg committed [r6259]

    Clarify ignoring differences due to first run of user module

  • Siem Korteweg Siem Korteweg committed [r6258]

    Use user-module data from previous run when not selected to run

  • Siem Korteweg Siem Korteweg committed [r6257]

    Fix haproxy check for directory

  • Siem Korteweg Siem Korteweg committed [r6256]

    essage=Several contributions from Bill Dietrich

  • Siem Korteweg Siem Korteweg committed [r6255]

    Additional location of sudo on Solaris

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Thank you for all suggestions and the contributed nodules. Please give some time to evaluate this. I would ike to suggest to discuss them via messages and then summarize in this forum.

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    The Bugs section was not yet configured. Should be ok now. I have restricted new tickets to authenticated users.

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Hello Bill, Did you check the manual page of scc? The DESCRIPTION section contains a regular expression example of this option. On a shell prompt you have to add directory /opt/scc/man to your MANPATH environment variable. You can also check online at http://sysconfcollect.sourceforge.net/examples/scc-help/scc/scc.html. Most options of all scc and scc-srv scripts only use their last instance. I will check the manual pages to indicate this (and the exceptions). regards, Siem

  • Siem Korteweg Siem Korteweg posted a comment on discussion SCC

    Hello Bill, I was under the impression that I would receive alerts for posts in this forum, but unfortunately that is not the case. Otherwise I would have reacted much earlier. What instructions did you miss for your desktop system? Did you download the rpm from the website (http://sysconfcollect.sourceforge.net/download.html) and follow the instructions for the RPM? Or did you download the src.tar.gz and went from there? Your remark makes me realize that the README indeed only covers development...

  • Siem Korteweg Siem Korteweg committed [r6254]

    Ensure presence of sysctl-data when running scc-collect in interactive mode

  • Siem Korteweg Siem Korteweg committed [r6253]

    running services is now variable data to limit changes

  • Siem Korteweg Siem Korteweg committed [r6252]

    Several additional files and commands

  • Siem Korteweg Siem Korteweg committed [r6251]

    Additional jenkins xml files with mainly variable data

  • Siem Korteweg Siem Korteweg committed [r6250]

    Improve determination of java path from process list and provide realpath

  • Siem Korteweg Siem Korteweg committed [r6249]

    Determine java versions

  • Siem Korteweg Siem Korteweg committed [r6248]

    Add haproxy configuration (suggested by Hendrik Visage)

  • Siem Korteweg Siem Korteweg modified a blog post

    Release of 1.19.44 of scc-srv

  • Siem Korteweg Siem Korteweg created a blog post

    Release of 1.19.44 of scc-srv

  • Siem Korteweg Siem Korteweg committed [r6247]

    Start new release.

  • Siem Korteweg Siem Korteweg committed [r6246]

    Release 1.19.44 of scc-srv.

  • Siem Korteweg Siem Korteweg committed [r6245]

    Finalize release scc-srv 1.19.44

1 >