gull-users Mailing List for Seagull

Hi,

I have just installed Seagull and I was trying to check basic =
functionalities.

I have tried to use ctrl.pl script with the basic scenario that appears =
in web documentation. However, I have found several problemas:

1) There is a mismatch: Documentation says that "set rate", "ramp", =
"stop", "pause" and "resume" use HTTP PUT queries. However, I have =
noticed that ctrl.pl uses GET queries.

2) When trying to use this funcionality, trying to control my client, =
this dies when receive whatever command, except the "Dump" one, with =
this error:



*** glibc detected *** seagull: munmap_chunk(): invalid pointer: =
0x081b0693 ***
=3D=3D=3D=3D=3D=3D=3D Backtrace: =3D=3D=3D=3D=3D=3D=3D=3D=3D
/lib/libc.so.6[0xb7dc1a11]
seagull(_ZN14C_ProtocolText6createEPS_PcS1_+0x4ad)[0x813905f]
seagull(_ZN15C_RemoteControl15analyze_commandEP14C_MessageFrame+0x17a)[0x=
819a286]
seagull(_ZN15C_RemoteControl22messageReceivedControlEv+0xca)[0x819a358]
seagull(_ZN15C_RemoteControl13TaskProcedureEv+0x34)[0x819a446]
seagull(_ZN13C_TaskControl3runEv+0x38)[0x80bcea0]
seagull[0x80bcf9d]
/lib/libpthread.so.0[0xb7f992ab]
/lib/libc.so.6(__clone+0x5e)[0xb7e1b75e]
=3D=3D=3D=3D=3D=3D=3D Memory map: =3D=3D=3D=3D=3D=3D=3D=3D
08048000-081c7000 r-xp 00000000 fd:01 657487     /usr/local/bin/seagull
081c7000-081c8000 rw-p 0017f000 fd:01 657487     /usr/local/bin/seagull
081c8000-082d5000 rw-p 081c8000 00:00 0          [heap]
b4c64000-b4c65000 ---p b4c64000 00:00 0
b4c65000-b5465000 rw-p b4c65000 00:00 0
b5465000-b5466000 ---p b5465000 00:00 0
b5466000-b5c66000 rw-p b5466000 00:00 0
b5c66000-b5c67000 ---p b5c66000 00:00 0
b5c67000-b6467000 rw-p b5c67000 00:00 0
b6467000-b6468000 ---p b6467000 00:00 0
b6468000-b6c68000 rw-p b6468000 00:00 0
b6c68000-b6c69000 ---p b6c68000 00:00 0
b6c69000-b7469000 rw-p b6c69000 00:00 0
b7469000-b746a000 ---p b7469000 00:00 0
b746a000-b7c6a000 rw-p b746a000 00:00 0
b7c6a000-b7c72000 r-xp 00000000 fd:01 1200663    =
/lib/libnss_files-2.4.so
b7c72000-b7c74000 rw-p 00007000 fd:01 1200663    =
/lib/libnss_files-2.4.so
b7c74000-b7d28000 r-xp 00000000 fd:01 1272067    =
/usr/lib/libstdc++.so.5.0.7
b7d28000-b7d2d000 rw-p 000b3000 fd:01 1272067    =
/usr/lib/libstdc++.so.5.0.7
b7d2d000-b7d32000 rw-p b7d2d000 00:00 0
b7d5d000-b7d5e000 rw-p b7d5d000 00:00 0
b7d5e000-b7e78000 r-xp 00000000 fd:01 1200646    /lib/libc-2.4.so
b7e78000-b7e7a000 r--p 00119000 fd:01 1200646    /lib/libc-2.4.so
b7e7a000-b7e7c000 rw-p 0011b000 fd:01 1200646    /lib/libc-2.4.so
b7e7c000-b7e7f000 rw-p b7e7c000 00:00 0
b7e7f000-b7e89000 r-xp 00000000 fd:01 1200686    /lib/libgcc_s.so.1
b7e89000-b7e8a000 rw-p 00009000 fd:01 1200686    /lib/libgcc_s.so.1
b7e8a000-b7e8b000 rw-p b7e8a000 00:00 0
b7e8b000-b7eae000 r-xp 00000000 fd:01 1200654    /lib/libm-2.4.so
b7eae000-b7eb0000 rw-p 00022000 fd:01 1200654    /lib/libm-2.4.so
b7eb0000-b7f85000 r-xp 00000000 fd:01 1270457    =
/usr/lib/libstdc++.so.6.0.8
b7f85000-b7f88000 r--p 000d5000 fd:01 1270457    =
/usr/lib/libstdc++.so.6.0.8
b7f88000-b7f8a000 rw-p 000d8000 fd:01 1270457    =
/usr/lib/libstdc++.so.6.0.8
b7f8a000-b7f90000 rw-p b7f8a000 00:00 0
b7f90000-b7f92000 r-xp 00000000 fd:01 1200652    /lib/libdl-2.4.so
b7f92000-b7f94000 rw-p 00001000 fd:01 1200652    /lib/libdl-2.4.so
b7f94000-b7fa3000 r-xp 00000000 fd:01 1200672    /lib/libpthread-2.4.so
b7fa3000-b7fa5000 rw-p 0000f000 fd:01 1200672    /lib/libpthread-2.4.so
b7fa5000-b7fa7000 rw-p b7fa5000 00:00 0
b7fac000-b7fad000 rw-p b7fac000 00:00 0
b7fad000-b7fca000 r-xp 00000000 fd:01 715545     =
/opt/seagull/bin/libtrans_ip.so
b7fca000-b7fce000 rw-p 0001d000 fd:01 715545     =
/opt/seagull/bin/libtrans_ip.so
b7fce000-b7fd3000 rw-p b7fce000 00:00 0
b7fd3000-b7fed000 r-xp 00000000 fd:01 1200639    /lib/ld-2.4.so
b7fed000-b7fef000 rw-p 00019000 fd:01 1200639    /lib/ld-2.4.so
bfd77000-bfd99000 rw-p bfd77000 00:00 0          [stack]
ffffe000-fffff000 ---p 00000000 00:00 0          [vdso]
Aborted


The scenario is as follows:

I start in localhost a radius server (the default one included), a =
radius client with this command line:

seagull -conf ../config/conf.client.xml -dico =
../config/radius-accounting.xml -ctrldicopath ../config/ -ctrl =
127.0.0.1:8088 -scen ../scenario/radius-accounting.client.xml -log =
../logs/radius-accounting.client.log  -llevel ET

and the ctrl.pl script is called as follows:

lebearoj@esmdc041:~/seagull/remote_control> ./ctrl_orig.pl =
http://127.0.0.1:8088/ scenario.txt
># Comment 1
>' Comment 2
>SET RATE 1 CPSlebearoj@esmdc041:~/seagull/remote_control> =
./ctrl_orig.pl http://127.0.0.1:8088/ scenario.txt
># Comment 1
>' Comment 2
>SET RATE 1 CPS
Error while sending request GET =
http://127.0.0.1:8088/seagull/command/rate?value=3D1:
  500 Server closed connection without sending any data back
Can't execute scenario

Error while sending request GET =
http://127.0.0.1:8088/seagull/command/rate?value=3D1:
  500 Server closed connection without sending any data back
Can't execute scenario


Could somebody help me? Does somebody have same problem?

Regards,
Beatriz

Hello Phung Dinh Dong,

=20

1)       There is no need to send the same message 4 times if you don't =
get an answer immediately. We do our best to help users, but we also =
work on other topics.=20

2)       Try to disable your SELinux, which may cause the problem.

=20

Olivier Boulkroune

=20

=20

________________________________

De : gul...@li... =
[mailto:gul...@li...] De la part de dongpd
Envoy=E9 : mardi 28 ao=FBt 2007 10:38
=C0 : gul...@li...
Objet : [Seagull-users] Please Help Me!

=20

Hello Guys,

=20

I'm Phung Dinh Dong from CDiT - VNPT, Viet Nam

Now I have a problem with seagull open source.

=20

I have compiled Seagull successfully follow Instructions.=20

After that, I entered diameter-env/run directory and run =
./start_server.ksh and not successfully. The error on Comand Line was: =
"|E|Unable to open library file [libtrans_ip.so] error =
[/usr/local/bin/libtrans_i
p.so: cannot restore segment prot after reloc: Permission denied]
|A|STOP  log". Could you tell me the solution for that error? Thanh you =
very much!

=20

I'm looking forward to hearing from you soon!

=20

Best Regards!

=20

Phung Dinh Dong

Hello Guys,

I'm Phung Dinh Dong from CDiT - VNPT, Viet Nam
Now I have a problem with seagull open source.

I have compiled Seagull successfully follow Instructions.=20
After that, I entered diameter-env/run directory and run =
./start_server.ksh and not successfully. The error on Comand Line was: =
"|E|Unable to open library file [libtrans_ip.so] error =
[/usr/local/bin/libtrans_i
p.so: cannot restore segment prot after reloc: Permission denied]
|A|STOP  log". Could you tell me the solution for that error? Thanh you =
very much!

I'm looking forward to hearing from you soon!

Best Regards!

Phung Dinh Dong

  Dear Sir or Madam,
  =20

  I'm Phung Dinh Dong from CDiT - VNPT, Viet Nam

  Now I have a problem with seagull open source.

  =20

  I have compiled Seagull successfully follow Instructions.=20

  After that, I entered diameter-env/run directory and run =
./start_server.ksh and not successfully. The error on Comand Line was: =
"|E|Unable to open library file [libtrans_ip.so] error =
[/usr/local/bin/libtrans_i
  p.so: cannot restore segment prot after reloc: Permission denied]
  |A|STOP  log". Could you tell me the solution for that error? Thanh =
you very much!

  =20

  I'm looking forward to hearing from you soon!

  =20

  Best Regards!

  =20

  Phung Dinh Dong

Pb with more channels
  Dear Sir or Madam,
  =20

  I'm Phung Dinh Dong from CDiT - VNPT, Viet Nam

  Now I have a problem with seagull open source.

  =20

  I have compiled Seagull successfully follow Instructions.=20

  After that, I entered diameter-env/run directory and run =
./start_server.ksh and not successfully. The error on Comand Line was: =
"|E|Unable to open library file [libtrans_ip.so] error =
[/usr/local/bin/libtrans_i
  p.so: cannot restore segment prot after reloc: Permission denied]
  |A|STOP  log". Could you tell me the solution for that error? Thanh =
you very much!

  =20

  I'm looking forward to hearing from you soon!

  =20

  Best Regards!

  =20

  Phung Dinh Dong

You just have to specify on which channel the message is received in the =
default section, as shown here =
http://gull.sourceforge.net/doc/core.html#scen_default. If you still =
encounter problems, sending you scenario, conf and log files would help.

=20

Regards,

=20

Olivier Boulkroune

=20

________________________________

De : gul...@li... =
[mailto:gul...@li...] De la part de QUEYROUX =
Pascal RD-CORE-LAN
Envoy=E9 : jeudi 16 ao=FBt 2007 16:52
=C0 : gul...@li...
Objet : [Seagull-users] Pb with more channels

=20

=20

        Hello Guys=20
On my traffic Section, I used two channels.=20
I want to use the Default Section, and how do you do this with two =
channels ? For on it's ok, but for the second, there is a problem in the =
launch.

The same question for Abort Section=20

Thanks for your helps=20

Pascal=20

Dear Sir or Madam,

I'm Phung Dinh Dong from CDiT - VNPT, Viet Nam
Now I have a problem with seagull open source.

I have compiled Seagull successfully follow Instructions.=20
After that, I entered diameter-env/run directory and run =
./start_server.ksh and not successfully. The error on Comand Line was: =
"|E|Unable to open library file [libtrans_ip.so] error =
[/usr/local/bin/libtrans_i
p.so: cannot restore segment prot after reloc: Permission denied]
|A|STOP  log". Could you tell me the solution for that error? Thanh you =
very much!

I'm looking forward to hearing from you soon!

Best Regards!

Phung Dinh Dong

Z3VsbC11c2Vyc6OsxOO6ww0KIA0KIERvZXMgYW55IG9uZSBoYXZlIHNvbWUgUkVHSVNURVIgc2Ny
aXB0cyB3aXRoIGF1dGhlbnRpY2F0aW9uIGFsZ29yaXRobT1BS0F2MS1NRDUgPw0KIA0KZmFuY3lf
eGlhb6OsZmFuY3lfeGlhb0Bhc3Ryb2NvbS5jbg0KMjAwNy0wOC0yMyANCg==

Hello,

I think I might have found the solution but I am not sure whether that's the
right way to do or not.

The /usr/local/bin was missing "libsctpsocket-170.so.1"; though it does have
"libsctpsocket-130.so.1" as a symbolic link pointing to '
libsctpsocket-170.so.1.0.7"; hence I created another symbolic link with "
libsctpsocket-170.so.1" pointing to libsctpsocket-170.so.1.0.7; and it
started to work.

lrwxrwxrwx  1 root bin       26 Aug 10 18:05 libsctpsocket-130.so.1 ->
libsctpsocket-170.so.1.0.7
lrwxrwxrwx  1 root root      26 Aug 17 19:40 libsctpsocket-170.so.1 ->
libsctpsocket-170.so.1.0.7

My doubts:

1) Is this a correct way to make it work?
2) If it is then how come when I compiled the package
seagull-external-lib-sctp-1.6.0-linux-2.6-intel.rpm and
seagull-trans-sctp-1.6.0-linux-2.6-intel.rpm it does not automatically
create one? I think it does create one but it is "libsctpsocket-130.so.1"
instead of "libsctpsocket-170.so.1".

Please do let me know if my solution was right and if it was then can you
help me clarify the doubts.

Thanks,
-Pratik


On 8/17/07, Pratik Mankad <pra...@gm...> wrote:
>
> Hello,
>
> I am trying to use SCTP over TCP using Seagull and I am having issues
> opening libtrans-exsctp.so. I found couple of related issues on the
> mailing list but solutions did not help. Here is what I have done:
>
> my config.client_sip.xml looks like:
>
> <?xml version="1.0" encoding="ISO-8859-1"?>
> <configuration name="Simple IP Client Conf">
>
>   <define entity="transport"
>     name="trans-sctp"
>     file="libtrans_extsctp.so"
>     create_function="create_cipsctpio_instance"
>     delete_function="delete_cipsctpio_instance"
>     init-args="type=tcp">
>   </define>
>
>   <define entity="channel"
>     name="channel-1"
>     protocol="sip-protocol"
>     transport="trans-sctp"
>     open-args="mode=client;source=10.20.20.12:5071;dest=10.20.20.110:5060
> ">
>   </define>
>
> </configuration>
>
> I issue following command:
>
> [root@girnar run]# ./pratik_client.ksh
>
> and I get this error:
>
> |E|Unable to open library file [libtrans_extsctp.so] error [
> libsctpsocket-170.so.1: cannot open shared object file: No such file or
> directory]
> |A|STOP  log
> [root@girnar run]#
>
> pratik_client.ksh looks like:
>
> export LD_LIBRARY_PATH=/usr/local/bin
>
> seagull -conf /usr/local/share/seagull/sip/config/conf.client_sip.xml
> -dico /usr/local/share/seagull/sip/config/sip- dictionnary.xml -scen
> /usr/local/share/seagull/sip/scenario/client.xml -log
> /usr/local/share/seagull/sip/logs/client.log -llevel ET
>
> My troubleshooting involved following things:
>
> 1) Run script set the environment variable to /usr/local/bin; command used
> is export LD_LIBRARY_PATH=/usr/local/bin
> 2) I am logged in as a root
> 3) create_function and delete_function uses the right instances
> (cipsctpio)
> 4) I even tried changing the path from file="libtrans_exsctp" to
> file="/usr/local/bin/libtrans_exsctp.io"
> 4) Instead of using "libtrans_exsctp.so" if I use "libtrans_ip.so" it work
> fine; which means there is something wrong that I am doing when I am trying
> to use SCTP or lib is bad???
>
> my /usr/local/bin looks like:
>
> [root@girnar bin]# ls -l
> total 9724
> -r-xr-xr-x  1 root bin     2584 Jul 17 06:22 computestat.ksh
> -r-xr-xr-x  1 root bin     6352 Jul 17 06:22 csvextract
> -r-xr-xr-x  1 root bin     5244 Jul 17 06:22 csvsplit
> -rwxr-xr-x  1 root root 2393269 Jul  5 12:58 gpg
> -rwxr-xr-x  1 root root   96368 Jul  5 12:58 gpgsplit
> -rwxr-xr-x  1 root root 1041519 Jul  5 12:58 gpgv
> -rwxr-xr-x  1 root root    3374 Jul  5 12:58 gpg-zip
> lrwxrwxrwx  1 root bin       28 Aug 10 18:05 libcpppsocketapi-170.so.1 ->
> libcppsocketapi-170.so.1.0.7
> -rwxr-xr-x  1 root bin    62988 Jul 17 06:22 libcpppsocketapi-170.so.1.0.7
> -rw-r--r--  1 root bin   537928 Jul 17 06:22 libcpppsocketapi.a
> -rwxr-xr-x  1 root bin     1210 Jul 17 06:22 libcpppsocketapi.la
> lrwxrwxrwx  1 root bin       28 Aug 10 18:05 libcpppsocketapi.so ->
> libcppsocketapi-170.so.1.0.7
> -r-xr-xr-x  1 root bin    11472 Jul 17 06:22 libparser_xml.so
> -rw-r--r--  1 root bin   404998 Jul 17 06:22 libsctplib.a
> -rwxr-xr-x  1 root bin      919 Jul 17 06:22 libsctplib.la
> lrwxrwxrwx  1 root bin       19 Aug 10 18:05 libsctplib.so ->
> libsctplib.so.1.0.5
> lrwxrwxrwx  1 root bin       19 Aug 10 18:05 libsctplib.so.1 ->
> libsctplib.so.1.0.5
> -rwxr-xr-x  1 root bin   128464 Jul 17 06:22 libsctplib.so.1.0.5
> lrwxrwxrwx  1 root bin       26 Aug 10 18:05 libsctpsocket-130.so.1 ->
> libsctpsocket-170.so.1.0.7
> -rwxr-xr-x  1 root bin   264820 Jul 17 06:22 libsctpsocket-170.so.1.0.7
> -rw-r--r--  1 root bin  2120682 Jul 17 06:22 libsctpsocket.a
> -rwxr-xr-x  1 root bin     1112 Jul 17 06:22 libsctpsocket.la
> lrwxrwxrwx  1 root bin       26 Aug 10 18:05 libsctpsocket.so ->
> libsctpsocket-170.so.1.0.7
> -r-xr-xr-x  1 root bin   162508 Jul 17 06:22 libtrans_extsctp.so
> -r-xr-xr-x  1 root bin   135960 Jul 17 06:22 libtrans_ip.so
> -r-xr-xr-x  1 root bin   164456 Jul 17 06:22 libtrans_iptls.so
> -rwxr-xr-x  1 root root  552645 Mar  8 12:41 packETH
> -r-xr-xr-x  1 root bin     3237 Jul 17 06:22 plotstat.ksh
> -r-xr-xr-x  1 root bin  1617524 Jul 17 06:22 seagull
> -r-xr-xr-x  1 root bin     3797 Jul 17 06:22 startoctave_plot.ksh
> -r-xr-xr-x  1 root bin     3509 Jul 17 06:22 startoctave_stat.ksh
> [root@girnar bin]#
>
>
>
> I will really appreciate if some one can help me with this; I am in very
> need of this one and it seems seagull is the only resource that I have;
> please help me.
>
> Thanks,
> -Pratik
>
>
>
>

Hello,

I am trying to use SCTP over TCP using Seagull and I am having issues
opening libtrans-exsctp.so. I found couple of related issues on the mailing
list but solutions did not help. Here is what I have done:

my config.client_sip.xml looks like:

<?xml version="1.0" encoding="ISO-8859-1"?>
<configuration name="Simple IP Client Conf">

  <define entity="transport"
    name="trans-sctp"
    file="libtrans_extsctp.so"
    create_function="create_cipsctpio_instance"
    delete_function="delete_cipsctpio_instance"
    init-args="type=tcp">
  </define>

  <define entity="channel"
    name="channel-1"
    protocol="sip-protocol"
    transport="trans-sctp"
    open-args="mode=client;source=10.20.20.12:5071;dest=10.20.20.110:5060">
  </define>

</configuration>

I issue following command:

[root@girnar run]# ./pratik_client.ksh

and I get this error:

|E|Unable to open library file [libtrans_extsctp.so] error [
libsctpsocket-170.so.1: cannot open shared object file: No such file or
directory]
|A|STOP  log
[root@girnar run]#

pratik_client.ksh looks like:

export LD_LIBRARY_PATH=/usr/local/bin

seagull -conf /usr/local/share/seagull/sip/config/conf.client_sip.xml -dico
/usr/local/share/seagull/sip/config/sip-dictionnary.xml -scen
/usr/local/share/seagull/sip/scenario/client.xml -log
/usr/local/share/seagull/sip/logs/client.log -llevel ET

My troubleshooting involved following things:

1) Run script set the environment variable to /usr/local/bin; command used
is export LD_LIBRARY_PATH=/usr/local/bin
2) I am logged in as a root
3) create_function and delete_function uses the right instances (cipsctpio)
4) I even tried changing the path from file="libtrans_exsctp" to
file="/usr/local/bin/libtrans_exsctp.io"
4) Instead of using "libtrans_exsctp.so" if I use "libtrans_ip.so" it work
fine; which means there is something wrong that I am doing when I am trying
to use SCTP or lib is bad???

my /usr/local/bin looks like:

[root@girnar bin]# ls -l
total 9724
-r-xr-xr-x  1 root bin     2584 Jul 17 06:22 computestat.ksh
-r-xr-xr-x  1 root bin     6352 Jul 17 06:22 csvextract
-r-xr-xr-x  1 root bin     5244 Jul 17 06:22 csvsplit
-rwxr-xr-x  1 root root 2393269 Jul  5 12:58 gpg
-rwxr-xr-x  1 root root   96368 Jul  5 12:58 gpgsplit
-rwxr-xr-x  1 root root 1041519 Jul  5 12:58 gpgv
-rwxr-xr-x  1 root root    3374 Jul  5 12:58 gpg-zip
lrwxrwxrwx  1 root bin       28 Aug 10 18:05 libcpppsocketapi-170.so.1 ->
libcppsocketapi-170.so.1.0.7
-rwxr-xr-x  1 root bin    62988 Jul 17 06:22 libcpppsocketapi-170.so.1.0.7
-rw-r--r--  1 root bin   537928 Jul 17 06:22 libcpppsocketapi.a
-rwxr-xr-x  1 root bin     1210 Jul 17 06:22 libcpppsocketapi.la
lrwxrwxrwx  1 root bin       28 Aug 10 18:05 libcpppsocketapi.so ->
libcppsocketapi-170.so.1.0.7
-r-xr-xr-x  1 root bin    11472 Jul 17 06:22 libparser_xml.so
-rw-r--r--  1 root bin   404998 Jul 17 06:22 libsctplib.a
-rwxr-xr-x  1 root bin      919 Jul 17 06:22 libsctplib.la
lrwxrwxrwx  1 root bin       19 Aug 10 18:05 libsctplib.so ->
libsctplib.so.1.0.5
lrwxrwxrwx  1 root bin       19 Aug 10 18:05 libsctplib.so.1 ->
libsctplib.so.1.0.5
-rwxr-xr-x  1 root bin   128464 Jul 17 06:22 libsctplib.so.1.0.5
lrwxrwxrwx  1 root bin       26 Aug 10 18:05 libsctpsocket-130.so.1 ->
libsctpsocket-170.so.1.0.7
-rwxr-xr-x  1 root bin   264820 Jul 17 06:22 libsctpsocket-170.so.1.0.7
-rw-r--r--  1 root bin  2120682 Jul 17 06:22 libsctpsocket.a
-rwxr-xr-x  1 root bin     1112 Jul 17 06:22 libsctpsocket.la
lrwxrwxrwx  1 root bin       26 Aug 10 18:05 libsctpsocket.so ->
libsctpsocket-170.so.1.0.7
-r-xr-xr-x  1 root bin   162508 Jul 17 06:22 libtrans_extsctp.so
-r-xr-xr-x  1 root bin   135960 Jul 17 06:22 libtrans_ip.so
-r-xr-xr-x  1 root bin   164456 Jul 17 06:22 libtrans_iptls.so
-rwxr-xr-x  1 root root  552645 Mar  8 12:41 packETH
-r-xr-xr-x  1 root bin     3237 Jul 17 06:22 plotstat.ksh
-r-xr-xr-x  1 root bin  1617524 Jul 17 06:22 seagull
-r-xr-xr-x  1 root bin     3797 Jul 17 06:22 startoctave_plot.ksh
-r-xr-xr-x  1 root bin     3509 Jul 17 06:22 startoctave_stat.ksh
[root@girnar bin]#



I will really appreciate if some one can help me with this; I am in very
need of this one and it seems seagull is the only resource that I have;
please help me.

Thanks,
-Pratik

Dear All,
i see in code definitions about Limited Counters:

generator-scenario/C_ScenarioControl.hpp
generator-scenario/C_ScenarioControl.cpp

but i can't find information about it in documentation. May be anybody
knows how to use it in scenarios?

Thank you!
Yours sincerely,
Roman Volkov

Hi All
I have found, that seagull works good with UDP.
The problem with RADIUS was in answer of the server.
FreeRadius doesn't send in reply AVP Acct-Session-Id, it uses only
Identifier for session identification.

Yours sincerely,
Roman Volkov

> 	Hello Guys
> On my traffic Section, I used two channels.
> I want to use the Default Section, and how do you do this with two
> channels ? For on it's ok, but for the second, there is a problem in
> the launch.
> The same question for Abort Section
>=20
> Thanks for your helps
>=20
> Pascal

Hello at all

In fact, I check to send a message with a script in mode client, and I
want receive with an another script a message in mode server on the same
port, in simultaneous.I have some problems, it's not ok.
Is it possible to use with two differents scripts mode server, and mode
client ?

Thanks for your helps

Pascal

Hello,
    I see the word [subset] when the documentation talks about Seagull's
Radius capabilities.
    Like Diameter, can I use seagull as a Radius server?
    Can I use it to send CoA/PoD messages to my NAS?
    Where can I get a sample scenario file to make 'seagull Radius' process
and respond to my authentication requests?

Thanks A Million,
Subash

Hi, Guys
I am new to the field. I am interested in Diameter Testing with seagull.
 Does anybody has idea on that. How to test Authentication ,Accounting
application with seagull. ?
If anybody has tried already with any Diameter ,please guide me ,.
 
Thanks
darshak
 
 
 

	Hello Guys
On my traffic Section, I used two channels.
I want to use the Default Section, and how do you do this with two
channels ? For on it's ok, but for the second, there is a problem in the
launch.
The same question for Abort Section

Thanks for your helps

Pascal

Dear All,
how can I check and reset counters?
In RADIUS we have only one byte as session identifier. When counter
have value more than 255, than SeaGull can't associate received
packets with Identifier.
I need some rule, where i can check counter value and reset it if it
more than 255.
Yours sincerely,
Roman Volkov

Hi Bruno,
I resolved the issue, problem was running in user account. For SCTP, we=20
need to run seagull in root.

Regards
Shashi

Bruno, Guerin (NonHP : AtosOrigin) wrote:

> Hello
> You need to change the create_function and the delete_function like thi=
s:
>     create_function=3D"create_cipsctpio_instance"
>     delete_function=3D"delete_cipsctpio_instance"
> (as describe on the documentation :=20
> http://gull.sourceforge.net/doc/core.html#Transport+protocols+and+chann=
els )
> =20
> =20
> Regards
> Bruno GUERIN
> -----Message d'origine-----
> *De :* gul...@li...=20
> [mailto:gul...@li...]*De la part de*=20
> shashikant.suman
> *Envoy=C3=A9 :* lundi 13 ao=C3=BBt 2007 17:48
> *=C3=80 :* gul...@li...
> *Objet :* [Seagull-users] Error : SCTP connection with seagull
>
>     Hi Oliver,
>     Shashi here, I am trying to use Seagull with SCTP support.
>     1) I have downloaded the sctplib-1.0.5.tar.gz &
>     socketapi-1.9.0.tar.gz and
>          placed in the external-lib-src folder
>     2) Edited both build-ext-lib.conf & build.conf as per Installation
>     guide
>     3) then run the build-ext-lib.ksh, build.ksh and install.ksh
>     4) All the files along with libtrans_extsctp.so are created fine,
>     mean no compliation and linking error.
>     But problem is when running Seagull client and server mode,  No=20
>     SCTP  connection, Tcp connetion getting established and all message=
s
>     getting exchange on TCP connection.
>
>     WHAT COULD BE THE POSSIBLE CAUSE??
>     *my conf.server.xml file looks like this....
>     <?xml version=3D"1.0" encoding=3D"ISO-8859-1"?>
>     *<configuration name=3D"Simple IP Server Conf">
>       <define entity=3D"transport"
>         name=3D"trans_sctp"
>         file=3D"libtrans_extsctp.so"
>         create_function=3D"create_cipio_instance"
>         delete_function=3D"delete_cipio_instance"
>         init-args=3D"type=3Dtcp">
>       </define>
>       <define entity=3D"channel"
>         name=3D"channel-1"
>         protocol=3D"diameter-v1"
>         transport=3D"trans_sctp"
>         open-args=3D"mode=3Dserver;source=3D127.0.0.1:3868">
>       </define>
>     *my conf.client.xml file looks like this....*
>     ?xml version=3D"1.0" encoding=3D"ISO-8859-1"?>
>     <configuration name=3D"Simple IP Client Conf">
>       <define entity=3D"transport"
>         name=3D"trans_sctp"
>         file=3D"libtrans_extsctp.so"
>         create_function=3D"create_cipio_instance"
>         delete_function=3D"delete_cipio_instance"
>         init-args=3D"type=3Dtcp">
>       </define>
>       <define entity=3D"channel"
>         name=3D"channel-1"
>         protocol=3D"diameter-v1"
>         transport=3D"trans_sctp"
>         open-args=3D"mode=3Dclient;dest=3D127.0.0.1:3868">
>       </define>
>
>     Is my  conf.server.xml/ conf.client.xml  CONFIGURED CORRECTLY?? If
>     yes then what could be the other error?
>
>     Thanks and Regards
>     Shashi
>
>     -------------------------------------------------------------------=
-----
>     EMAIL DISCLAIMER : This email and any files transmitted with it
>     are confidential and intended solely for the use of the individual
>     or entity to whom they are addressed. Any unauthorised
>     distribution or copying is strictly prohibited. If you receive
>     this transmission in error, please notify the sender by reply
>     email and then destroy the message. Opinions, conclusions and
>     other information in this message that do not relate to official
>     business of Mascon shall be understood to be neither given nor
>     endorsed by Mascon. Any information contained in this email, when
>     addressed to Mascon clients is subject to the terms and conditions
>     in governing client contract.
>
>     Whilst Mascon takes steps to prevent the transmission of viruses
>     via e-mail, we can not guarantee that any email or attachment is
>     free from computer viruses and you are strongly advised to
>     undertake your own anti-virus precautions. Mascon grants no
>     warranties regarding performance, use or quality of any e-mail or
>     attachment and undertakes no liability for loss or damage,
>     howsoever caused.
>



EMAIL DISCLAIMER : This email and any files transmitted with it are confi=
dential and intended solely for the use of the individual or entity to wh=
om they are addressed. Any unauthorised distribution or copying is strict=
ly prohibited. If you receive this transmission in error, please notify t=
he sender by reply email and then destroy the message. Opinions, conclusi=
ons and other information in this message that do not relate to official =
business of Mascon shall be understood to be neither given nor endorsed b=
y Mascon. Any information contained in this email, when addressed to Masc=
on clients is subject to the terms and conditions in governing client con=
tract.=0A=0AWhilst Mascon takes steps to prevent the transmission of viru=
ses via e-mail, we can not guarantee that any email or attachment is free=
 from computer viruses and you are strongly advised to undertake your own=
 anti-virus precautions. Mascon grants no warranties regarding performanc=
e, use or quality of any e-mail or attachment and undertakes no liability=
 for loss or damage, howsoever caused. =0A=0A

Hi Torsten,

 

I have generated some XCAP/HTTP requests using the Seagull. 

I had the following snippet in my client.xml and saw the requests are sent
to my server.

 

<traffic>

  <send channel="channel-1">

    <!-- Open a new transport (TCP) socket for this call -->

    <action>

      <open args="mode=client;dest=localhost:8080"></open>

    </action>

 

Regards,

Santhosh

 

-----Original Message-----
From: gul...@li...
[mailto:gul...@li...] On Behalf Of Torsten
Sent: Thursday, August 16, 2007 3:33 AM
To: gul...@li...
Subject: [Seagull-users] XCAP Client and HTTP

 

Hi all,

 

I want to generate the Traffic of the Seagull XCAP Client Scenario

against my own XCAP Server listening on Port 8080 for HTTP/XCAP Traffic.

How can I utilize the HTTP Protcol for XCAP with Seagull?

All Packets are just send over TCP an dont't reach my Server.

Any suggestions?

 

regards

Torsten

 

 

-------------------------------------------------------------------------

This SF.net email is sponsored by: Splunk Inc.

Still grepping through log files to find problems?  Stop.

Now Search log events and configuration files using AJAX and a browser.

Download your FREE copy of Splunk now >>  http://get.splunk.com/

_______________________________________________

Gull-users mailing list

Gul...@li...

https://lists.sourceforge.net/lists/listinfo/gull-users

Hi all,

I want to generate the Traffic of the Seagull XCAP Client Scenario
against my own XCAP Server listening on Port 8080 for HTTP/XCAP Traffic.
How can I utilize the HTTP Protcol for XCAP with Seagull?
All Packets are just send over TCP an dont't reach my Server.
Any suggestions?

regards
Torsten

Dear All,
did anybody try to use SeaGull for work with UDP-based protocols?
The RADIUS scenarios in example from SeaGull distribution is based on TCP :)
I am trying to correctly implement RADIUS accounting client, and now I
can send correct accounting packets to the FreeRADIUS server. The
server send reply, but SeaGull doesn't see it, and after timeout it
counts this packets unacknowledged.

May be somebody can help me with it? I can't find where to see....

Yours sincerely,
Roman Volkov

Hi:

I tried to store and restore "Vendor-Id", and "Firmware-Revision" avp
value from the request message in to answer message within the INIT
section of the scenario.  Both the segull's log file and the test log
file suggest that these AVPs are missing in the answer message generated
by the Seagull.

Can anyone let me know if this is a known problem?

Thanks,
Madhava

Notice:  This email message, together with any attachments, may contain information  of  BEA Systems,  Inc.,  its subsidiaries  and  affiliated entities,  that may be confidential,  proprietary,  copyrighted  and/or legally privileged, and is intended solely for the use of the individual or entity named in this message. If you are not the intended recipient, and have received this message in error, please immediately return this by email and then delete it.

Dear all,
i have found, that radius authenticator calculation code needs in fix,
without it FreeRadius doesn't accept packets from SeaGull RADIUS
client.

This is patched version of function create_algo_MD5_radius
from file library-crypto/CryptExternalMethods.cpp

int create_algo_MD5_radius(char          *  P_msg,
                           int              P_msg_size,
                           char          *  P_shared_secret,
                           unsigned char *  P_result) {
  int        L_ret         = 0 ;
  int        L_size_shared = 0 ;

  MD5_CTX    L_Md5Ctx ;

  if (P_shared_secret != NULL) {
    L_size_shared = strlen(P_shared_secret);
  }

  memset(P_msg + 4, 0, 16);

  MD5_Init(&L_Md5Ctx);
  MD5_Update(&L_Md5Ctx, P_msg, P_msg_size);
  MD5_Update(&L_Md5Ctx, P_shared_secret, L_size_shared);
  MD5_Final(P_result, &L_Md5Ctx);

  return (L_ret);
}

Yours sincerely,
Roman Volkov

Hi Bruno,
Thanks for Reply. I have checked for the same configuration what ever=20
you have suggested, But
Now issue is, neither SCTP connection nor Tcp connection. Could any one=20
help me on this issue??
conf.xml given  below:
<define entity=3D"transport"
    name=3D"trans-1"
    file=3D"libtrans_extsctp.so"
    create_function=3D"create_cipsctpio_instance"
    delete_function=3D"delete_cipsctpio_instance"
    init-args=3D"type=3Dtcp">
  </define>
  <define entity=3D"channel"
    name=3D"channel-1"
    protocol=3D"diameter-v1"
    transport=3D"trans-1"
    open-args=3D"mode=3Dclient;dest=3D127.0.0.1:3868">
  </define>
Thanks and Regards
Shashi


Bruno, Guerin (NonHP : AtosOrigin) wrote:

> Hello
> You need to change the create_function and the delete_function like thi=
s:
>     create_function=3D"create_cipsctpio_instance"
>     delete_function=3D"delete_cipsctpio_instance"
> (as describe on the documentation :=20
> http://gull.sourceforge.net/doc/core.html#Transport+protocols+and+chann=
els )
> =20
> =20
> Regards
> Bruno GUERIN
> -----Message d'origine-----
> *De :* gul...@li...=20
> [mailto:gul...@li...]*De la part de*=20
> shashikant.suman
> *Envoy=C3=A9 :* lundi 13 ao=C3=BBt 2007 17:48
> *=C3=80 :* gul...@li...
> *Objet :* [Seagull-users] Error : SCTP connection with seagull
>
>     Hi Oliver,
>     Shashi here, I am trying to use Seagull with SCTP support.
>     1) I have downloaded the sctplib-1.0.5.tar.gz &
>     socketapi-1.9.0.tar.gz and
>          placed in the external-lib-src folder
>     2) Edited both build-ext-lib.conf & build.conf as per Installation
>     guide
>     3) then run the build-ext-lib.ksh, build.ksh and install.ksh
>     4) All the files along with libtrans_extsctp.so are created fine,
>     mean no compliation and linking error.
>     But problem is when running Seagull client and server mode,  No=20
>     SCTP  connection, Tcp connetion getting established and all message=
s
>     getting exchange on TCP connection.
>
>     WHAT COULD BE THE POSSIBLE CAUSE??
>     *my conf.server.xml file looks like this....
>     <?xml version=3D"1.0" encoding=3D"ISO-8859-1"?>
>     *<configuration name=3D"Simple IP Server Conf">
>       <define entity=3D"transport"
>         name=3D"trans_sctp"
>         file=3D"libtrans_extsctp.so"
>         create_function=3D"create_cipio_instance"
>         delete_function=3D"delete_cipio_instance"
>         init-args=3D"type=3Dtcp">
>       </define>
>       <define entity=3D"channel"
>         name=3D"channel-1"
>         protocol=3D"diameter-v1"
>         transport=3D"trans_sctp"
>         open-args=3D"mode=3Dserver;source=3D127.0.0.1:3868">
>       </define>
>     *my conf.client.xml file looks like this....*
>     ?xml version=3D"1.0" encoding=3D"ISO-8859-1"?>
>     <configuration name=3D"Simple IP Client Conf">
>       <define entity=3D"transport"
>         name=3D"trans_sctp"
>         file=3D"libtrans_extsctp.so"
>         create_function=3D"create_cipio_instance"
>         delete_function=3D"delete_cipio_instance"
>         init-args=3D"type=3Dtcp">
>       </define>
>       <define entity=3D"channel"
>         name=3D"channel-1"
>         protocol=3D"diameter-v1"
>         transport=3D"trans_sctp"
>         open-args=3D"mode=3Dclient;dest=3D127.0.0.1:3868">
>       </define>
>
>     Is my  conf.server.xml/ conf.client.xml  CONFIGURED CORRECTLY?? If
>     yes then what could be the other error?
>
>     Thanks and Regards
>     Shashi
>
>     -------------------------------------------------------------------=
-----
>     EMAIL DISCLAIMER : This email and any files transmitted with it
>     are confidential and intended solely for the use of the individual
>     or entity to whom they are addressed. Any unauthorised
>     distribution or copying is strictly prohibited. If you receive
>     this transmission in error, please notify the sender by reply
>     email and then destroy the message. Opinions, conclusions and
>     other information in this message that do not relate to official
>     business of Mascon shall be understood to be neither given nor
>     endorsed by Mascon. Any information contained in this email, when
>     addressed to Mascon clients is subject to the terms and conditions
>     in governing client contract.
>
>     Whilst Mascon takes steps to prevent the transmission of viruses
>     via e-mail, we can not guarantee that any email or attachment is
>     free from computer viruses and you are strongly advised to
>     undertake your own anti-virus precautions. Mascon grants no
>     warranties regarding performance, use or quality of any e-mail or
>     attachment and undertakes no liability for loss or damage,
>     howsoever caused.
>



EMAIL DISCLAIMER : This email and any files transmitted with it are confi=
dential and intended solely for the use of the individual or entity to wh=
om they are addressed. Any unauthorised distribution or copying is strict=
ly prohibited. If you receive this transmission in error, please notify t=
he sender by reply email and then destroy the message. Opinions, conclusi=
ons and other information in this message that do not relate to official =
business of Mascon shall be understood to be neither given nor endorsed b=
y Mascon. Any information contained in this email, when addressed to Masc=
on clients is subject to the terms and conditions in governing client con=
tract.=0A=0AWhilst Mascon takes steps to prevent the transmission of viru=
ses via e-mail, we can not guarantee that any email or attachment is free=
 from computer viruses and you are strongly advised to undertake your own=
 anti-virus precautions. Mascon grants no warranties regarding performanc=
e, use or quality of any e-mail or attachment and undertakes no liability=
 for loss or damage, howsoever caused. =0A=0A