Repackaging with VMWare Player - Advanced Installer Community
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Repackaging with VMWare Player

When I use the repackaging Wizard AI asks for a VM to perform the repackaging operation from. If I choose "WMware Player" I always get

Code: Select all

The virtual machine is currently powered off. Please start it and log-in before continuing.
If I choose "VMware Workstation" everything works fine.

Shouldn't it be possibe to work with VMware Player instead of WMware Workstation?

Thanks in advance!
Marc
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

...unfortunately there's also a problem with VMware Workstation. Repackaging successfully starts the VM and tries to do the initial capturing - but after the VM got started, I immediately get:

Code: Select all

Error during virtual machine configuration: shared folders.
Sharing folder is "always enabled" for the corresponding VM.

Any ideas on that?

Marc
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

Hi Marc,

You need the workstations too. Please check the recommendation we give in the user guide and try again:
It is important you first prepare the virtual machine before starting the capture. Hints for the missing virtual machine preparations will be displayed by the wizard but here's a list you should consider:
- The minimum required versions are VMWare Workstation 8.0 and VMWare Player 5.0.
- VMWare tools should be updated.
- The VM should be at least XP SP2 or above.
- If the state of the VM is powered off, you should power it on and login with the specified username and password before continuing. The repackager wizard will power the VM for you but you will have to login manually.
- During repackaging, the repackager tool will require elevation so be sure to check the VM for any prompts.
If the problem with the shared folders still persists please let us know.

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

Hi Bigdan,

I already followed the recommendations. I installed WMware workstation and I also tried the "Workstation 8.0" hardware compatibility mode (the current Workstation release is 9).

Any further suggestions?

Thanks!
Marc
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

Hi Marc,

I'm afraid we cannot reproduce the problem with the shared folders. Have you made sure your VMware tools are up to date?

Can you arrange a FTP for us with the virtual machine that reproduces this for you, so we can download and test it on our development machines? If this is not possible, can you give us more details
about the environment your are running it:
- host OS and SP level
- guest OS and SP level
- VMware version and also the version for VMware tools
- also, please send us the .vmx file (it should not be a large one, so it can be sent by e-mail or attach it on the forums, zipped)

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

- host OS and SP level
-> Windows 7 64bit, German, SP1, all Windows Updates till today
- guest OS and SP level
-> Windows 7 64bit, German, SP1, all Windows Updates till today
- VMware version and also the version for VMware tools
-> VMware® Workstation, 9.0.1 build-894247
- also, please send us the .vmx file (it should not be a large one, so it can be sent by e-mail or attach it on the forums, zipped)
-> see attachment
Attachments
Windows 7 x64.zip
(1.3 KiB) Downloaded 334 times
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

Hi,

We did some more testing and we were able to find the problem that prevented the repackager from running the VM Player, that should be allowed too, a fix will be included ASAP.

Regarding the second problem, i.e. the shared folders, we still cannot reproduce it. As a try, can you right click on the VM in VMware, select "Settings", here go to "Options" tab where
you can find the "Share Folders" entry. After selecting "Shared Folders" in the right side you should see a list of folders, can you please delete all the ones that have their name starting with "AI_"
and try the machine one more time?

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

We did some more testing and we were able to find the problem that prevented the repackager from running the VM Player, that should be allowed too, a fix will be included ASAP.
Sounds good - meanwhile I'll use the VMware Workstation.
Regarding the second problem, i.e. the shared folders, we still cannot reproduce it. As a try, can you right click on the VM in VMware, select "Settings", here go to "Options" tab where
you can find the "Share Folders" entry. After selecting "Shared Folders" in the right side you should see a list of folders, can you please delete all the ones that have their name starting with "AI_"
and try the machine one more time?
Unfortunately deleting the "AI_"-folders didn't solve the problem.

You will find the entire VM image here:
http://blablabla.de/Windows7x64.zip

Thanks again!
Marc
Last edited by MAGTX on Thu May 30, 2013 10:29 pm, edited 1 time in total.
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

HI Marc,

Thank you for the download link.

We would like to test the machine on exactly the same user account, would it be possible to send me an e-mail to support at advancedinstaller dot com with its password?

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

I would prefer to reset the credentials.

The problem also occurs with my configuration when I create a new user (and delete the old one)

User: ai
PW: testtest

I also reset these credentials in VM->Settings->Options->Change User and provided them to AI repackager.
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

Hi Marc,

We managed to reproduce this, the problem appears only if you have auto-login setup for the machine. If you disable that it should work.

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

...still get that "shared folders" error. Status quo:

* VM->Settings->Options->Autologin->disabled
* remained VM->Settings->Options->Shared Folers "Always enabled" (right)?
* remained VM-Host->Preferences->Workspace->"enable all shared folders by default"
* switched back VM-Host->Preferences->Workspace->default hardware compatibility to "Workstation 9.0" (VM itself still runs at V 8.0)
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

any further ideas on that issue?
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: Repackaging with VMWare Player

Hi Marc,

We tried some more tests with the settings you specified but we cannot reproduce it. Disabling/enabling autologin is the only way for us to reproduce it unfortunately.

Best regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
MAGTX
Posts: 11
Joined: Mon Feb 18, 2013 12:54 pm

Re: Repackaging with VMWare Player

Hi!

Now tested on another physical hardware - fresh installation of VMware Workstation (V9.0.1 build 894247), AI (V9.9 build 49525) and a VM with a fresh Win7 Enterprise 64bit installation (German language, updated till today, Auto-login disabled, Shared folders enabled)...but same error.

Unfortunately, for me, AI is unusable without a VM-AI-connection for repackaging. Maybe you have a step to step guide for setting up a working repackaging environment?!

Otherwise I sadly would have to switch to a different product.

Best,
Marc

Return to “Common Problems”