DIFx Download Issue, and more - Advanced Installer Community
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

DIFx Download Issue, and more

I wonder if anyone can shed any light on this issue.

Advanced Installer 10.1 on Windows 7 fails to download the DIFx dlls with an -536870894 error.

Attempt the same thing on Windows XP (SP3) and the dlls download correctly.

Taking the dlls from the XP machine and copying them to correct location on the Windows 7 machine - still errors.
Location details taken from this post http://www.advancedinstaller.com/forums ... f=2&t=9775 also taking the files attached to the post also produces an error.

Any ideas or suggestions?

Thanks,
Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

I'm not sure why you encountered this behavior.
I've tested your scenario but I cannot reproduce the behavior. Can you please make sure you have the necessary files in the right path according to the driver type: x86/x64.
Please note that I followed the steps described in this DIFx thread.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

Dan,

The post you mentioned is the post I also linked to - I followed those steps to the letter.
I have taken the files from a XP machine that was able to download, and used the files in the post - both with the same result.

I'm using Advanced Installer 10.1 - is the DIFx path when Advanced Installer looks for the dll files stored somewhere in the registry or a config file? Is there something further I can check or is it hard-coded in the application?

Interestingly, I've also spotted a possible bug with the Driver Wizard. When you run through the Wizard it provides a 'Driver Options' dialogue where you can set the installation options (Force, no ARP entry, Install Unsigned Driver etc.) - whatever you select in that dialogue do not come through as selected when the Wizard has finished and you view the settings in the 'Driver Settings' pane.

Any further suggestions?

Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

Please make sure you copied the DIFx in the right path according to the driver type: x86/x64.
There is no registry entry where the path for the DIFx is stored.

The path for the Win7 machine is:

Code: Select all

C:\ProgramData\Caphyon\Advanced Installer\DIFxAPPv211\English-US\x86
I have also attached a rar file which containing the DIFx.

If the behavior still persists can you please give as a screen shot with your folder containing the DIFx.

Indeed, the settings that you apply in the dialog stage of the Wizard do not come through as selected in the “Driver Settings” pane. I can reproduce and confirm this issue. A fix will be available in the next version of Advanced Installer, thank you for bringing it to our attention. As a workaround you can select your settings again in the “Driver Settings” pane.

Best regards,
Dan
Attachments
DIFx.rar
(149.68 KiB) Downloaded 1314 times
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

Hi Dan,

I still have the build issue, although I'm also seeing a 12029 error when building.

See below for screenshot of the DIFx folder:

Image

Any other suggestions?

Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

You can also try to use the DIFx for the 64bit drivers. For that you have to use the following path:

Code: Select all

C:\ProgramData\Caphyon\Advanced Installer\DIFxAPPv211\English-US\x64
I have attached a rar file which containing the DIFx.

Best regards,
Dan
Attachments
64.zip
(282.82 KiB) Downloaded 1094 times
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

The driver I'm working with is 32bit, so placing the 64bit DIFx files won't and hasn't made any difference.

I've taken another Windows 7 (32bit) machine, installed AI 10.1, registered it and copied the two sets of DIFx files into the correct folders noted previously.
I'm still getting an error:

Downloading the DIFx custom action DLL(s) 12007
Build finished because an error was encountered

Any further ideas? This error code must be something meaningful to someone.

The other thing to note is that the Windows 7 is a clean install, so the only other software installed is Orca and VMWare Tools - could I be missing something that is required by AI?

Any further suggestions?

Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

Can you please send us the .AIP (project file) to support at advancedinstaller dot com so we can do further investigation.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

Dan,

AIP file sent - it is occurring on multiple AIP files, but the one sent is the one I'm currently working on.
I've not been able to successfully build a driver package.

Thanks,

Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

You must have your DIFx in the following path:

Code: Select all

C:\ProgramData\Caphyon\Advanced Installer\DIFxAPPv211\Localized\x86
You have to use this path because your application has been marked as localized.

I have also attached a zip file with the DIFx.

Best regards,
Dan
Attachments
x86.zip
(199.88 KiB) Downloaded 1281 times
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

Thanks Dan that worked!

How do I know that it's been marked as localized?
Is there a setting for this somewhere?
Is it something wrong with my setup? It's a standard installation with no settings changed from installation time.

I'm glad it is now working, but need to understand why it didn't work in the first place, as the non-localized path under Windows XP functions correctly.

Thanks,
Dunnpy
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: DIFx Download Issue, and more

Hello,

You are welcome. I'm glad you got this working.

Because you use a specific language, English(United Kingdom) this marked your application as being localized.
For a non-localized application you can use English(United States), default language.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Dunnpy
Posts: 7
Joined: Thu May 16, 2013 8:47 am

Re: DIFx Download Issue, and more

Dan,

So, as my system locale is set to 'English (United Kingdom)' Advanced Installer uses that setting to set 'Languages="en_GB"' value inside the .aip file and that is why the 'C:\ProgramData\Caphyon\Advanced Installer\DIFxAPPv211\English-US\x86' folder structure didn't work for me.

That's great, now I know how and why I was having the issue.

Thanks for all your help,

Dunnpy

Return to “Common Problems”