White labelling installation - Advanced Installer Community
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

White labelling installation

Hi,

We are required to white label our installation package for multiple vendors.

We would like to maintain one installation package going forward, but for each vendor apply a few differences to make it look like their own.

These differences include:
- Product name
- Company details
- Installation path
- Dialog and banner images

We have looked at the template project feature, but this seems that we will be required to maintain multiple installations going forward.

Are there any other known ways to achieve this?

Your help will be greatly appreciated!
Clive
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: White labelling installation

Hello Clive,

Can you please take a look on the Branding of the installer thread which debates a similar issue?

If you need any help, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Hello Dan,

That is exactly what we needed, thank you!

I am just having a problem with one thing; we are trying to change the dialog and banner images per build as well, which I believe we do by changing it per build under Table Editor > Binary > dialog.bmp/banner.bmp, which is fine except for one problem, Advanced Installer doesn't seem to resolve these paths to be relative paths, nor does it resolve them if I change it manually in the .aip file. This hampers our automated build process.

Do you know if there is a workaround or if the fix could be added into the next release?

Kind regards,
Clive
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: White labelling installation

Hi Clive,

Please note that there is no need to edit the “Table Editor” to change the dialog and banner images.
You can apply the workaround for the banners too which has been described at point a) from the Branding of the installer thread.

If you have other questions, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Hi Dan,

I have tried following the steps under point a) in that thread, but get stuck at step 8
- in the "Display" text field from the "Properties" panel choose another .rtf license file for each "Scrollable Text" control (only one of your "Scrollable Text" controls can be selected in the "LicenseAgreementDlg" dialog, but you can select the others from the combobox from the "Properties" panel)
At this point, I can't seem to be able to find how I select a different image. If I select "..." under Indirect Property it brings up User defined properties of icons, now how do I add the different dialog or banner image?

Also, would this need to be done on every page? From what I can see it does, because I couldn't see my second image on the next page. This is very tedious to do for every client build that we may add in the future.

Kind regards,
Clive
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Hi Dan,

I found the nice way to change the dialog and banner images by selecting the build under Themes and then changing the Dialog and Banner images for the build.
This works great! I think we have covered all the aspects that we are required to white label our installations.

Thank you for your help!
Kind regards,
Clive
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Hi Dan,

We are also required to change the Control Center icon per build.
I have run into the relative path problem with the Table Editor again by following these instructions from the Branding of the Installer thread:
If you want to change the Control Panel icon:
- go in the Product Details page
- choose a "Control Panel Icon"
- go in the Table Editor page
- select the "Icon" table
- there you will see the "Control Panel Icon" you chose
- from the "Table Editor" toolbar select a build
- double click on the path of your icon and choose an icon for the current build
Build and run the project.
The icon path is not resolved as a relative path therefore our automated build fails.

It seems that no path values in the Table Editor are resolved to relative paths to the .aip file.

Please advise.
Thank you,
Clive
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: White labelling installation

Hi Clive,

Indeed, this seems to be an Advanced Installer limitation. I added this improvement on our TODO list and it will be available in a future version of Advanced Installer. Thank you for bringing it in our attention.

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Eusebiu wrote:Hi Clive,

Indeed, this seems to be an Advanced Installer limitation. I added this improvement on our TODO list and it will be available in a future version of Advanced Installer. Thank you for bringing it in our attention.

Best regards,
Eusebiu
Hi Eusebiu,

Do you know if this improvement has been done yet?
I downloaded version 11 and tested it, and it seems it hasn't. This problem has become a pain for us as it affects our automated builds, and whenever our build paths change for different branches, our builds fail.

Or perhaps there is another workaround we could implement?
Please advise.
Thank you
Clive
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: White labelling installation

Hi Clive,

Unfortunately this improvement was not implemented yet, but I just increased its priority, so the development team get a chance to work on it soon. Sorry for the inconvenience.

As a workaround, you can try to create "pre-build" events that copy the needed resources to the correct path before the build process starts.

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
clive_bor
Posts: 48
Joined: Thu Mar 09, 2006 8:32 am

Re: White labelling installation

Hi Eusebiu,

Ok thank you! Much appreciated.
I will try the workaround in the meantime.

Kind regards,
Clive
Eusebiu
Posts: 4971
Joined: Wed Nov 14, 2012 2:04 pm

Re: White labelling installation

You're welcome Clive.

Just let us know if you have any other question.

Best regards,
Eusebiu
Eusebiu Aria - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube

Return to “Common Problems”