10.6 installer won't install under Win 8.1 - Advanced Installer Community
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

10.6 installer won't install under Win 8.1

Something weird is going on with our installer projects. We set Launch Condtions under Supported Operating Systems to exclude only Windows 2000. Then we discovered when our installer projects were updated by v10.6, that Windows 8.1 x86 was not enabled by default. But now, when we enable 8.1 x86, Windows 8.1 still refuses to install our software.

And 8.1 x86 continues to appear in NT exclusion lists with Windows 2000 in the project file, even when the check boxes are checked/unchecked in the AI GUI. Not sure what is going on here, but I think that the project conversion got confused when it added Windows 8.1 x86.
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: 10.6 installer won't install under Win 8.1

Hello,
Something weird is going on with our installer projects. We set Launch Condtions under Supported Operating Systems to exclude only Windows 2000. Then we discovered when our installer projects were updated by v10.6, that Windows 8.1 x86 was not enabled by default. But now, when we enable 8.1 x86, Windows 8.1 still refuses to install our software.
Because you excluded the Windows 2000 from your installation package than the 32-bit Windows Versions hasn't been marked anymore. Because not all of its children have the same state the 32-bit Windows Versions parent wasn't marked.
When you updated to the 10.6 version of Advanced Installer and also the Windows 8.1 Operating System support was introduced in Advanced Installer, by default it hasn't been marked because its parent wasn't been marked. This is the normal behavior.
Please notice that the Windows 8.1 x64 Operating System was enabled by default because its parent was enabled.
And 8.1 x86 continues to appear in NT exclusion lists with Windows 2000 in the project file, even when the check boxes are checked/unchecked in the AI GUI. Not sure what is going on here, but I think that the project conversion got confused when it added Windows 8.1 x86.
I'm not sure why you encountered this behavior. I've tested your scenario but I cannot replicate it.
Can you please send us the .AIP (project file) to support at advancedinstaller dot comso we can investigate it? If it contains confidential information you can send us a small test project which replicate this behavior.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

I'm not sure when Windows 8 support was added to AI, but we did not experience the same issue with Win 8. Irrespective of how your hierarchy works, it is not intuitive to have new OS designations marked as excluded just because the oldest designation is marked as excluded.

This appears to be a fault in the design of the AI feature, rather than an expected behaviour. I'm sure it will bite others. This is one of those 'set and forget' features that someone would not think about when they are installing one of your frequent updates. What it means is that, since updating to 10.6, any installers that we have burned onto CDs for clients will fail if/when they upgrade to Windows 8.1. This could come back to haunt us years from now, when people try to reinstall after a hardware change. I think we caught it relatively early, but still it will be a problem.

Note that, due to the cost of our software, our customers often do not upgrade frequently. It is typical for people to use the same version of our software for up to 10 years. And since each copy of the software is customized, we would have to go back and custom-build a new disk from an archived source in order to fix the problem at no cost to our client.

In the meantime, nothing I can do in GUI, including turning the entire 32bit branch off and on again, will remove Win 8.1 from the exclusion list.
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

Been fiddling with this for a couple of hours now. I've tried resurecting old projects and copying WindowsType entries across, deleting all WindowsTypexxxxx entries from the AI project file and letting it recreate them, and nothing will allow AI to generate a setup that will run in Windows 8.1. Depending on what I've done, Win 8.1 reports all Windows 2000, or Windows NT and Windows 2000 or no Windows versions at all, but it still displays the "...cannot be installed on the following Windows versions: ..." message.

I just went back to an old ISX 12 installer version of our software and installed it without any problems under Win 8.1.
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

Well, here is the code that AI is generating in the .msi file for LaunchCondition:

Code: Select all

( Version9X OR VersionNT64 OR ( VersionNT AND ((VersionNT <> 603) OR ((VersionNT = 603) AND (ServicePackLevel >= 1)) OR VersionNT64) ) )
The way that I read this, it can be 64 bit, or NOT equal to 603, or equal to 603 AND service pack level = 1. The problem is that Windows 8.1 is 603 and there is no service pack 1. If there had been a Windows 8 service pack 1 it would have been 602 AND service pack level = 1.

Therefore, an AI 10.6 generated .msi file can never install under 32 bit Windows 8.1. Once I used ORCA to edit the .msi file and remove references to 603, I was able to install successfully under 32 bit Windows 8.1
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

I had to fix this in 88 places. What a frustration this has been!!
Because you excluded the Windows 2000 from your installation package than the 32-bit Windows Versions hasn't been marked anymore. Because not all of its children have the same state the 32-bit Windows Versions parent wasn't marked.
Actually, it was -- and still is. This is completely unintuitive.

There should be no reason why having excluded the oldest OS from the Launch Conditions, would automatically (and silently) remove the newest OS, especially when this is done without notice during an AI update.
dkehl
Posts: 2
Joined: Wed Oct 16, 2013 2:14 am

Re: 10.6 installer won't install under Win 8.1

I would like to chime in that I've experienced this problem or something similar as well - I've checked the Windows 8.1(x86 and x64), but neither actually install under Windows 8.1.
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: 10.6 installer won't install under Win 8.1

GlenT Had multiple builds in the package, the problem was that the launch conditions are set per-build, so you need to select each build from the toolbar and set the launch conditions separately. Then make sure you are testing the correct build, i.e. the one for which you updated the launch conditions.

The automatic de-selection of the new OS was made by us as an improvement. Based on gathered feedback we considered that if the OSes tree was partially selected we should automatically untick Windows 8.1 too. We know realized this is wrong and we shall revert this support starting with Advanced Installer 10.8, version 10.7 is almost ready for release so we cannot include the changes in it.

Thank you for your feedback.

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
Bogdan
Posts: 2796
Joined: Tue Jul 07, 2009 7:34 am
Contact: Website

Re: 10.6 installer won't install under Win 8.1

Update, this was a quick and small change in the code so I included the changes in 10.7 too. So any projects you migrate from Advanced Installer 10.3 or older directly to 10.7 will automatically support Windows 8.1, under OS launch conditions.

Regards,
Bogdan
Bogdan Mitrache - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

Bogdan wrote:GlenT Had multiple builds in the package, the problem was that the launch conditions are set per-build, so you need to select each build from the toolbar and set the launch conditions separately. Then make sure you are testing the correct build, i.e. the one for which you updated the launch conditions.
This is true and it did lead to additional confusion. There are some features in AI that allow per-build customization that don't seem to make a lot of sense. This is one of them. I can't imagine any circumstances where you would want to change the OS support based on different types of media builds of the same source files.

Another problem is the AI GUI, which uses a couple of different methods of selecting builds for a given feature. Unfortunately, I often overlook the drop-down in the toolbar (especially when I am not expecting per-build customization). However, when an extra window pane with tree view on the left is used, it is easier to notice the different build types. In our case, we support a single file install for downloads as well as a CD format.
Last edited by GlenT on Tue Oct 29, 2013 3:28 pm, edited 1 time in total.
GlenT
Posts: 118
Joined: Mon Jul 16, 2012 8:44 pm

Re: 10.6 installer won't install under Win 8.1

Bogdan wrote:Update, this was a quick and small change in the code so I included the changes in 10.7 too. So any projects you migrate from Advanced Installer 10.3 or older directly to 10.7 will automatically support Windows 8.1, under OS launch conditions.
Thank you!
dkehl
Posts: 2
Joined: Wed Oct 16, 2013 2:14 am

Re: 10.6 installer won't install under Win 8.1

An update, my issue was the same as Glens - I had multiple builds and only one had been updated. Once I went through all the builds the missing check mark became apparent.
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: 10.6 installer won't install under Win 8.1

Hi,
An update, my issue was the same as Glens - I had multiple builds and only one had been updated. Once I went through all the builds the missing check mark became apparent.
I'm glad you got this working. If you have other questions, please let us know.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube
jhsoft
Posts: 4
Joined: Fri Nov 01, 2013 2:16 pm

Re: 10.6 installer won't install under Win 8.1

BUMP - where is v. 10.7 ?

This is critical - Windows 8.1 and 2012 R2 are RTM - we need this now!!!

Thanks in advance,
Jesper
Dan
Posts: 4530
Joined: Wed Apr 24, 2013 3:51 pm

Re: 10.6 installer won't install under Win 8.1

Hi Jesper,

The next version (10.7) of Advanced Installer should be released in the first days of the next week.

Thank you for your patience and understanding.

Best regards,
Dan
Dan Ghiorghita - Advanced Installer Team
Follow us: Twitter - Facebook - YouTube

Return to “Common Problems”